KitchenAid Cooktop Switches

Your Price

$52.68

KitchenAid Cooktop Surface Element Switch

★★★★★

3 Reviews

PartSelect Number PS12070192

Manufacturer Part Number W10900107

A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and cooktops and is a genuine OEM part that is sold with all of the necessary hardware to secure it, such as the Philips-head and flat-head screws, brackets, bolts, washers, palnuts (also known as a push-on nut) and terminals. Over time, this switch can wear out or become faulty, leading to heating issues for your stovetop and cooktop, such as not heating, overheating, or staying at the same heat level. Depending on the orientation of your cooktop, you will need to install this switch with or without the bracket and palnut, so reference your user manual for that information when replacing this switch. You will need a screwdriver and set of pliers during the replacement and installation process, and simply need to follow the instruction manual included with this switch to correctly replace and rewire it.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

James E from RIDGECREST, CA

faulty switch

I found the received switch (PS12070192) a poor replacement for the original, or even the earlier replaced part (PS11744446, in 2016) I was going to replace since the press/return feature seemed slow to return.

The male spade lugs on the received switch are so positioned that engagement is only possible if the lug is bent out at a large angle. The lug set-back from the body edge, and the raised ribs on the sides still prevent full engagement of the connections.

I did install the new switch but found that was the only switch that didn’t give a signal light when turned on.

I have reinstalled the earlier unit.

Is part# PS 11744446 no longer available?

James E Weimholt. jmwm4031@verizon.net Read more...

Your Price

$82.12

KitchenAid Cooktop Surface Element Switch

★★★★★

1 Review

PartSelect Number PS11770037

Manufacturer Part Number W10917724

Installation Instructions

Albert from VALLEY MILLS, TX

Switch to the left front burner not working right.

Repair has not been made yet still waiting for the part. The part is on order and was told it would be shipped in 1/3 business days. Still waiting for the part to come from China. This is the problem with parts being made out side the U. S. A. Read more...

Your Price

$204.08

KitchenAid Cooktop Inifinite Switch

★★★★★

1 Review

PartSelect Number PS11750742

Manufacturer Part Number WPW10234425

Installation Instructions

Craig from Fairfax Station, VA

Inop burner switch

Remove and replace. Check. Read more...

Your Price

$101.03

KitchenAid Cooktop Surface Element Control Switch

PartSelect Number PS11745698

Manufacturer Part Number WP8286070

Your Price

$89.55

KitchenAid Cooktop 6 Inch Surface Element Infinite Switch

★★★★★

3 Reviews

PartSelect Number PS11740892

Manufacturer Part Number WP3191049

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Your Price

$123.40

KitchenAid Cooktop Speed Control Switch

★★★★★

2 Reviews

PartSelect Number PS11742668

Manufacturer Part Number WP4456836

Your Price

$121.15

KitchenAid Cooktop Surface Element Switch Kit

★★★★★

4 Reviews

PartSelect Number PS972602

Manufacturer Part Number 8203534

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Scott from Huntsville, AL

2 burner control - "Large" = "Large", "Small" = "Large"

Well, I found the two screws that held the cook top in place and backed them out. Pulled the cook top out of the counter and took out a bazillion little sheet metal screws that held the cover in place. The controllers were grouped in a cluster of four, and the "Front Left" was easy to spot. I pulled the wires off one-by-one and noted the marking on the old controller, and noted the markings on the new controller, especially the translator table that came with the new controller - the old and new controllers are a bit different. Then screwed the new controller in and tested the cook top - worked fine. Then I changed the hard wiring to the power source (a bad job originally) to a three prong plug and socket arrangement. Put it all back together and was back in business - a "piece of cake" repair. A week later "somebody" dropped "something" onto the corner of the glass and chipped out a little chunk of glass. Oh well, fun to fix anyway! Read more...