KitchenAid Cooktop Valves
Find your part
Enter your model number or a part number and click "Search"
Popular KitchenAid Cooktop Valves
X-Large Burner Head with Electrode
PartSelect Number PS2085280
Manufacturer Part Number 74007736
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Joe from Saratoga Springs, NY
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
Read more...
Large Burner Head
PartSelect Number PS2085279
Manufacturer Part Number 74007735
This part includes the spark igniter.
Fixes these symptoms
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Joe from Saratoga Springs, NY
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
Read more...
HEAD, BURNER (LEFT FRONT & RIGHT FRONT)
PartSelect Number PS11745754
Manufacturer Part Number WP8286815
Burner Cap - Small
Haviong directions would have been very helpful. Read more...
PartSelect Number PS11740923
Manufacturer Part Number WP3191898
Sold individually.
Installation Instructions
Joseph from Matawan, NJ
needed to replace the main top of stove
First I removes all visible screws. The stove top would not budge. I noticed that the elements had screws holding the top in place. These were difficult to remove and all eight screw broke. I then removed the top. I had to remove the broken screws by drilling them out and re-tapping the threads. This was the single most difficult thing to do and took the most time. Once this was complete, re-installing the top was quite simple. Haviong directions would have been very helpful. Read more...
Burner Cap
PartSelect Number PS11745641
Manufacturer Part Number WP8284669
Burner Cap - 6000 BTU
Sold individually.