KitchenAid Cooktop Elements and Burners
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular KitchenAid Cooktop Elements and Burners
Your Price
$86.95
In Stock
KitchenAid Cooktop Dual Surface Element (3000w/1400w)
PartSelect Number PS16543522
Manufacturer Part Number W11517959
This is a dual surface element for compatible ranges. If the surface heating element for your range is currently not turning on or has issues heating up or maintaining a heat level, it will need to be replaced. This surface heating element features two burners, one smaller involving an inner 1400W element, and one larger burner involving both the inner and outer ones (3000W). Replacing this dual surface element will require a screwdriver or drill, as well as wire cutters and needle-nose pliers. This surface element is sold as an individual OEM part, so you may need to consider how many heating elements you need before ordering.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
MELISSA from CHAPLIN, CT
Your Price
$35.53
In Stock
KitchenAid Cooktop Surface Burner - 8 Inch 2600w
PartSelect Number PS11743367
Manufacturer Part Number WP660533
The surface burner or element on your range provides the heat that you cook with. If your element will not heat, you may need to replace the surface burner. This surface burner is 8 inches in diameter and 2600 watts. The burner element is made of metal and has two prongs that connect it to the range. The manufacturer recommends you replace the burner receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy. To complete the repair simply lift the old burner up and out, and replace it with the new one. Be sure to disconnect power to the range before beginning this repair.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Jonathan from Lilburn, GA
8 inch burner wouldn't come on. Wires shorted out
One screw holds the block onto the stove top. Had to clean out fitting for phillips screwdriver or screw would have stripped because it was old with lots of buildup. Even cleaned out, this screw required great force with phillips screwdriver to keep from stripping. Caution! If you strip it, you'll have to drill it out! The rest was a snap. Cut the old wires leading to the old block (not too close to where wires disappear into back of stove, though!). Strip insulation off both wires and attach with the connectors that came in the kit. Then push the wires into the block, and finally, attach the block back to the stove top (new screw is supplied). Restore power and everything should be fine. One problem: Roper/Whirlpool built their appliance in such a way that when the connector block shorts out, it usually takes the infinite switch with it. So I ended up having to go back and purchase that switch as well (which just so happens to cost twice to three times as much!). If you put it all back together and it still doesn't work, that's probably what happened, so go ahead and remove the knob panel and check that switch (it's right behind the control knobs on the front). You will probably find a burned connector at the back top left or the switch. Don't forget to write down which wire goes where (or just take a picture of it).
Read more...
Your Price
$28.24
In Stock
KitchenAid Cooktop Standard Y-frame Range Surface Burner
The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.
Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself. Read more...
PartSelect Number PS11743366
Manufacturer Part Number WP660532
The standard y-frame surface burner provides heat to your range. If you notice that your element will not heat, you may need to replace your surface burner. This product is 6 inches in diameter, and 1500W. The manufacturer suggests replacing the receptacle at the same time that you replace the surface burner. Many of our customers have rated this repair as very easy, and you will not need any tools. To complete the repair, simply lift out the old burner and replace it with the new one. Check that the burners are turned off before you begin this repair.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Laurie from Tequesta, FL
Burner element broke and drip bowls needed to be replaced.
I went to the local discount mart and bought drip bowls. The ones available at that store did not fit, so I decided to buy directly from the stove's manufacturer distributor.The drip pans were simple to replace, as was the new burner element. My old one had broke and was still working, but I decided to replace it when I ordered the drip pans.
Everything was easy to install and it looks like a brand new new stove top! I saved a lot of money doing it myself. Read more...
Your Price
$133.31
In Stock
KitchenAid Cooktop Dual Surface Element - 2500w/1200w
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done Read more...
PartSelect Number PS11764902
Manufacturer Part Number W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and heats up the area directly above it. You will need to replace the element if it does not heat up properly. As you will be working around electricity, be sure that your range is disconnected from power before you begin this repair. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
GEORGE from NEWNAN, GA
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off powerremoved ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done Read more...
Your Price
$124.79
In Stock
KitchenAid Cooktop 6" Surface Element, 1200 W
PartSelect Number PS12348164
Manufacturer Part Number W11171119
Sold individually.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Terry from Rockwall, TX
Surface Element Out
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Read more...
Your Price
$133.31
In Stock
KitchenAid Cooktop Element With Limiter 6 Inch - 1200w
PartSelect Number PS11764915
Manufacturer Part Number W10823711
This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This model is sold individually and is 1200 watts. The main reason for needing to replace this part is if your element will not heat. Before ordering, make sure to test your stove top radiant element for continuity to make sure it is the problem. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.
Fixes these symptoms
- Element will not heat
- Will Not Start
- See more...
Installation Instructions
Mark from Loxahatchee, FL
Right rear burner went bad
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Read more...
Your Price
$79.55
In Stock
KitchenAid Cooktop X-large Burner Head With Electrode
PartSelect Number PS2085280
Manufacturer Part Number 74007736
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.
Fixes these symptoms
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Joe from Saratoga Springs, NY
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
Read more...
Your Price
$122.88
In Stock
KitchenAid Cooktop Surface Element
PartSelect Number PS16620520
Manufacturer Part Number W11563195
This radiant surface element is designed to convert electrical energy into consistent, even heat for stovetop cooking. Positioned on the top of the range, it delivers reliable performance by maintaining optimal temperatures across its smooth, flat surface. Ideal for replacing a non-functioning or unevenly heating burner, this component helps restore cooking efficiency and safety. Constructed from durable materials to withstand daily use, it ensures long-term reliability. Installation should be performed with the appliance powered off, and compatibility should be confirmed with your specific range model before replacement.
Fixes these symptoms
- Element will not heat
- See more...
Your Price
$152.55
In Stock
KitchenAid Cooktop Surface Element
PartSelect Number PS11751137
Manufacturer Part Number WPW10251108
This 3200-watt radiant surface heating element is designed to deliver consistent and efficient heat to a designated cooking area on electric cooktops. Engineered for durability and performance, it distributes heat evenly across the surface, enhancing cooking precision and reducing energy waste. As a genuine OEM replacement, it ensures compatibility with a wide range of appliances from Whirlpool, Maytag, KitchenAid, Amana, and Kenmore. Ideal for restoring functionality to a cooktop with a non-heating or unevenly heating element, installation requires basic hand tools and should be performed with the appliance disconnected from power. This component helps maintain optimal cooking performance and energy efficiency.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Mark from W ALEXANDER, PA
Elements thermostat wasn't working properly the burner would not turn down automatic.
Lifted the range burner top removed the old element and installed new burner unit .
Read more...
Your Price
$75.63
In Stock
KitchenAid Cooktop Large Burner Head
PartSelect Number PS2085279
Manufacturer Part Number 74007735
This part includes the spark igniter.
Fixes these symptoms
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Joe from Saratoga Springs, NY
electrode would not lite burner
Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast.
Read more...
Related KitchenAid Cooktop Parts
- All KitchenAid Cooktop parts
- KitchenAid Cooktop Brackets and Flanges
- KitchenAid Cooktop Caps and Lids
- KitchenAid Cooktop Cooktops
- KitchenAid Cooktop Fuses
- KitchenAid Cooktop Grates
- KitchenAid Cooktop Hardware
- KitchenAid Cooktop Igniters
- KitchenAid Cooktop Ignitions
- KitchenAid Cooktop Knobs
- KitchenAid Cooktop Seals and Gaskets
- KitchenAid Cooktop Switches
- KitchenAid Cooktop Trims
- KitchenAid Cooktop Valves
- KitchenAid Cooktop Wire Plugs and Connectors