Frigidaire Dishwasher Filters
Find your part
Enter your model number or a part number and click "Search"Here is an example model number plate:
Popular Frigidaire Dishwasher Filters
Your Price
$20.44
Dishwasher Filter
PartSelect Number PS11770489
Manufacturer Part Number 5304506525
This filter is for dishwashers.
The filter removes food particles and debris from the water to prevent the drain from clogging.
Follow the instructions in the manual when installing this part.
Fixes these symptoms
- Not cleaning dishes properly
- Not draining
- See more...
Your Price
$22.29
Soil Trap
PartSelect Number PS11770485
Manufacturer Part Number 5304506518
Fixes these symptoms
- Not cleaning dishes properly
- See more...
Installation Instructions
Hector from Port CHarlotte, FL
The spary arm and soil trap in my diswasher fell off into the heating element. The pieces melted no longer fitting original area. Ordered the parts at PartSelect and to our amazement, the parts came the next day even though I took 3 - 5 day shipping. We were very happy that we had a new dishwasher
Took no tools. Removed the melted pieces and snapped the new ones in the machine and I was ready to start washing!!! My wife and I are very impressed with prompt and courteous professionalism of PartSelect . I will recommend them highly. I would rate this a 5 star rating, wasn't able to change that star from one to 5
Read more...
Your Price
$45.16
Drain Trap
PartSelect Number PS420500
Manufacturer Part Number 154252701
Part is found under the lower spray arm.
Fixes these symptoms
- Not cleaning dishes properly
- Not draining
- See more...
Installation Instructions
linda from LEEDS, AL
2 parts melted on the heating element
Manually took off melted parts and replaced them with the new ones.
Read more...
Your Price
$33.93
Your Price
$15.97
Your Price
$37.48
Filter Cover
Putting everything back together was fairly straight forward - I wish some of the diagrams included with the parts were a little more detailed, but I found that if I paid close attention to the design of every part there was some logic to how they fit with one another. The only real problem I had was with the filter cover - this part had a needlessly complicated attachment design that required a special Frigidaire tool to snap into place that I did not have - ultimately I had to modify the part to get it to fit in place and then devise another means of securing it.
In the end, everything worked out fine - the dishwasher has never worked or sounded better!
*
A few days after I got the dishwasher working again, my garbage disposal jammed. Upon inspection, I determined that a blade from the lower impeller of my dishwasher was the culprit! Dispirited, I began the tedious process of taking apart the dishwasher again, expecting to find a shattered impeller that I must have somehow installed incorrectly. But when I got everything open, the lower impeller looked perfect! It must have been a blade from the old impeller that jammed my disposal. As a head's up, if your own dishwasher suffers a mechanical failure, be sure none of the parts wind up in your disposal. Read more...
PartSelect Number PS419979
Manufacturer Part Number 154157401
Installation Instructions
Charles from Los Angeles, CA
Dishwasher started making loud noises, upon examination many plastic parts were completely decomposed & brittle.
I started by dismantling my dishwasher from the top down, beginning with the water distributor propellor. Beneath that was a plastic filter that crumbled when you touched it, and basically came off in my hands. Eventually, I figured out that the motor could be removed when accessed from underneath, and once I got it out I just pulled everything apart. Some plastic parts only needed descaling, but others were essentially rotten. Both impellers were in particularly bad shape - their blades were broken off and their shafts were literally fused to the axle of the motor - I had to use a wood chisel & hammer to carve them off! Putting everything back together was fairly straight forward - I wish some of the diagrams included with the parts were a little more detailed, but I found that if I paid close attention to the design of every part there was some logic to how they fit with one another. The only real problem I had was with the filter cover - this part had a needlessly complicated attachment design that required a special Frigidaire tool to snap into place that I did not have - ultimately I had to modify the part to get it to fit in place and then devise another means of securing it.
In the end, everything worked out fine - the dishwasher has never worked or sounded better!
*
A few days after I got the dishwasher working again, my garbage disposal jammed. Upon inspection, I determined that a blade from the lower impeller of my dishwasher was the culprit! Dispirited, I began the tedious process of taking apart the dishwasher again, expecting to find a shattered impeller that I must have somehow installed incorrectly. But when I got everything open, the lower impeller looked perfect! It must have been a blade from the old impeller that jammed my disposal. As a head's up, if your own dishwasher suffers a mechanical failure, be sure none of the parts wind up in your disposal. Read more...
Filter Housing Seal
Putting everything back together was fairly straight forward - I wish some of the diagrams included with the parts were a little more detailed, but I found that if I paid close attention to the design of every part there was some logic to how they fit with one another. The only real problem I had was with the filter cover - this part had a needlessly complicated attachment design that required a special Frigidaire tool to snap into place that I did not have - ultimately I had to modify the part to get it to fit in place and then devise another means of securing it.
In the end, everything worked out fine - the dishwasher has never worked or sounded better!
*
A few days after I got the dishwasher working again, my garbage disposal jammed. Upon inspection, I determined that a blade from the lower impeller of my dishwasher was the culprit! Dispirited, I began the tedious process of taking apart the dishwasher again, expecting to find a shattered impeller that I must have somehow installed incorrectly. But when I got everything open, the lower impeller looked perfect! It must have been a blade from the old impeller that jammed my disposal. As a head's up, if your own dishwasher suffers a mechanical failure, be sure none of the parts wind up in your disposal. Read more...
PartSelect Number PS419716
Manufacturer Part Number 154086001
Installation Instructions
Charles from Los Angeles, CA
Dishwasher started making loud noises, upon examination many plastic parts were completely decomposed & brittle.
I started by dismantling my dishwasher from the top down, beginning with the water distributor propellor. Beneath that was a plastic filter that crumbled when you touched it, and basically came off in my hands. Eventually, I figured out that the motor could be removed when accessed from underneath, and once I got it out I just pulled everything apart. Some plastic parts only needed descaling, but others were essentially rotten. Both impellers were in particularly bad shape - their blades were broken off and their shafts were literally fused to the axle of the motor - I had to use a wood chisel & hammer to carve them off! Putting everything back together was fairly straight forward - I wish some of the diagrams included with the parts were a little more detailed, but I found that if I paid close attention to the design of every part there was some logic to how they fit with one another. The only real problem I had was with the filter cover - this part had a needlessly complicated attachment design that required a special Frigidaire tool to snap into place that I did not have - ultimately I had to modify the part to get it to fit in place and then devise another means of securing it.
In the end, everything worked out fine - the dishwasher has never worked or sounded better!
*
A few days after I got the dishwasher working again, my garbage disposal jammed. Upon inspection, I determined that a blade from the lower impeller of my dishwasher was the culprit! Dispirited, I began the tedious process of taking apart the dishwasher again, expecting to find a shattered impeller that I must have somehow installed incorrectly. But when I got everything open, the lower impeller looked perfect! It must have been a blade from the old impeller that jammed my disposal. As a head's up, if your own dishwasher suffers a mechanical failure, be sure none of the parts wind up in your disposal. Read more...
Related Parts
- All Frigidaire Dishwasher parts
- Frigidaire Dishwasher Brackets and Flanges
- Frigidaire Dishwasher Circuit Boards and Touch Pads
- Frigidaire Dishwasher Dishracks
- Frigidaire Dishwasher Dispensers
- Frigidaire Dishwasher Doors
- Frigidaire Dishwasher Grilles and Kickplates
- Frigidaire Dishwasher Handles
- Frigidaire Dishwasher Hardware
- Frigidaire Dishwasher Hinges
- Frigidaire Dishwasher Hoses and Tubes
- Frigidaire Dishwasher Insulations
- Frigidaire Dishwasher Knobs
- Frigidaire Dishwasher Latches
- Frigidaire Dishwasher Motors
- Frigidaire Dishwasher Panels
- Frigidaire Dishwasher Pumps
- Frigidaire Dishwasher Racks
- Frigidaire Dishwasher Seals and Gaskets
- Frigidaire Dishwasher Spray Arms
- Frigidaire Dishwasher Springs and Shock Absorbers
- Frigidaire Dishwasher Switches
- Frigidaire Dishwasher Timers
- Frigidaire Dishwasher Wheels and Rollers
