Electrolux Range Switches | Replacement Parts & Accessories | PartSelect

Popular Electrolux Range Switches

Your Price
$25.09
Infinite Burner Switch
PartSelect Number PS1145040
Manufacturer Part Number 316436001
The infinite burner switch controls the stove top eight-inch surface burner, which is the large surface element. If your surface element is not warming up, the element can be tested to determine whether or not it is defective. If your element is not defective, then it is more than likely that the infinite burner switch is the issue. Before you install the infinite burner switch you will need to unplug your range from the power supply, or shut off the home circuit breaker. The tools you will need to do this repair include a number one square head screwdriver and a pair of needle nose pliers.
Fixes these symptoms
Element will not heat
Oven is too hot
Oven not heating evenly

See more...
Installation Instructions
William from Burke, VA says,

Back Burner didn't function
We moved into our townhouse about 6 yrs ago. During the home inspection we checked the range and saw the Red light come on when we turned on each burner. After moving in we realized the large back b...read more

Your Price
$34.33
Infinite Burner Switch - Small Element - 240V
PartSelect Number PS1145039
Manufacturer Part Number 316436000
This is a part for your range. This switch controls the stovetop surface burner. If you notice that your stove top is not turning on or is not adjusting to the corresponding desired heat, it is mostly likely due to the burner switch needing to be replaced. You will need a #1 square-head screwdriver and needle-nose pliers. Disconnect the power from the range. You will need to move the range out from the wall to remove the upper back panel to access to this part. This is an OEM genuine part.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Gerald from Paris, TN says,

Switch Was Making A Arcing Sound When Burner Was On
Removed the back cover of the range. Removed the knob from the front of the switch. Removed 2 screws holding switch to range. Removed wires one at a time and connected to proper poles on replacemen...read more

Your Price
$43.57
Infinite Burner Switch - 8" - 240V
PartSelect Number PS1529262
Manufacturer Part Number 318293811
This switch controls the stove top surface burner.
Fixes these symptoms
Element will not heat


Installation Instructions
George from WYOMING, MI says,

Controller fails to hold a constant heating element tempature
The replacement of this part is simple enough, out with the old, in with the new. At issue here is the way the controller fails. The heating element goes to the highest temperature. The original c...read more

Your Price
$129.69
Surface Burner Switch
PartSelect Number PS3504401
Manufacturer Part Number 316238201
This switch controls the stove top surface burner. This surface element control switch (part number 316238201) is for ranges. Surface element control switch 316238201 turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part.
Fixes these symptoms
Element will not heat


Your Price
$43.93
Oven Door Light Switch
PartSelect Number PS1146807
Manufacturer Part Number 316445500
Fixes these symptoms
No Symptoms for this part
Your Price
$45.68
Warming Drawer Control Switch
PartSelect Number PS12176130
Manufacturer Part Number 5304508926
Fixes these symptoms
No Symptoms for this part
Your Price
$48.14
SWITCH
PartSelect Number PS1529261
Manufacturer Part Number 318293810
Fixes these symptoms
Element will not heat


Your Price
$23.47
SWITCH
PartSelect Number PS8692370
Manufacturer Part Number 808136601
Fixes these symptoms
No Symptoms for this part
Your Price
$27.96
Thermal Fuse
PartSelect Number PS2581909
Manufacturer Part Number 318005229
Fixes these symptoms
No Symptoms for this part
Your Price
$51.51
Oven Door Light Switch
PartSelect Number PS1146808
Manufacturer Part Number 316445501
This oven door light switch signals the light to turn off when the oven door closes. If your light switch is defective or you smell a burning odor, make sure to check the switch and replace it. The tool needed for this replacement is a screwdriver. Locate the switch, usually from under the oven top. Remove the wires and pull the switch out. Refer to the diagram provided by the manufacturer for further instructions and guidance before installation. Make sure you remember to unplug the oven from the power source before starting this repair, and wear gloves for protection.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Vincent from Brunswick, GA says,

Oven light stayed on & smelled like electrical burning.
Wife was cooking our thanks giving turkey, when an oder of burning was noticed. I walked over to the oven and smelled the area of oven light, it was bad. I turned off and unpluged oven. Got a screw dr...read more