Electrolux Range Hardware

Your Price

$11.71

Igniter/Orifice Mounting Screw

★★★★★

1 Review

PartSelect Number PS440022

Manufacturer Part Number 316240600

This part is the igniter/orifice mounting screw for your cooktop or range. It is approximately ½ an inch in length and is made of metal. The mounting screw connects the orifice to the cooktop. If the orifice is loose, or the screw is missing, this is the part that will replace it. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Your Price

$1.55

Terminal Block Screw

★★★★★

1 Review

PartSelect Number PS474106

Manufacturer Part Number 5308014215

Size: 6-20 x 0.312 inch. Sold individually.

Your Price

$9.74

Steel Washer

PartSelect Number PS436497

Manufacturer Part Number 316008401

This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.

Installation Instructions

KELLY from LAKELAND, FL

Handle on oven door broke

called around and way to much money for repair man as well as parts from local appliance repair store. They wanted 10.00 for a screw that we got from you for $3.00 same as all the other parts saved over 70.00 dollars.

quick delivery and easy repair ... like new again .

would use you again Read more...

Your Price

$12.57

Mounting Screw

PartSelect Number PS467647

Manufacturer Part Number 5303323134

Sold individually.

Your Price

$13.96

Fan Blade Retainer Nut

PartSelect Number PS439475

Manufacturer Part Number 316136600

This fan blade retainer nut in your oven secures the fan blade onto the motor shaft, preventing it from coming loose during operation. You can typically find it at the back of your oven behind a cover. If you notice that the fan blade becomes wobbly or does not rotate smoothly, or your oven starts to make rattling or scraping sounds, the nut may be damaged. If the fan blade cannot spin properly, your food may cook unevenly. Your oven will also work harder and consume more energy to maintain the desired temperature. To access the nut, you will need to remove the back panel of your oven. Remove any screws or release any clips holding it using a screwdriver. To remove the nut itself, you will need either a wrench or a pair of pliers to loosen it from the motor shaft. The fan blade is sold separately from this genuine OEM nut.