My Orders
Dishwasher Caps and Lids
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Shop By Brand
View More
Popular Dishwasher Caps and Lids
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete it you only need a flat blade screwdriver. Use the screwdriver to pry the locking tab open on the cap, located at the front of your upper dishrack. Pull off the end cap and lock the new one into place.
This rail end cap, or dishrack stop clip, is a genuine OEM replacement part for your dishwasher. This part keeps the rack in your dishwasher from sliding out. This is a very easy repair, to complete it you only need a flat blade screwdriver. Use the screwdriver to pry the locking tab open on the cap, located at the front of your upper dishrack. Pull off the end cap and lock the new one into place.
Installation Instructions
Bobby from Austin, TX
Broken wheels, Caps and Brackets. Couldn't hold dishes or wash right.
Just use a hexagonal driver to remove the Upper rack roller, screw the new ones in, place caps on the rail ends, and pop the new wheel on with some pliers! Simple and fun!
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuously falls off the track or rail.
This is an end cap for a dishwasher rack. This part is about 2.5 inches long, is black, and is made of plastic. You may need to replaced this part if it is broken, or if your dishwasher rack continuously falls off the track or rail.
Installation Instructions
Wilson from MENIFEE, CA
upper and lower rack ASM showed sing of rust
Repair was simple, lower rack just remove and replaced with out any tools or disassemble required, for the upper rack installation, the end cap need to be removed out of the sliding tracks, slide old rack out and discard, clean the track with a suitable cloth and slide new rack in to the tracks, reinstall the old end caps, as a good preve
... Read more
nting measure, order new end caps just in case they are need it if the old ones crack during removal.
save old rollers from old racks for future repairs
save old rollers from old racks for future repairs
Read less
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right away. This rinse aid cap comes with the gasket, so you should discard the existing gasket and rinse aid cap at the same time. The repair is relatively straightforward, and requires no tools.
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right away. This rinse aid cap comes with the gasket, so you should discard the existing gasket and rinse aid cap at the same time. The repair is relatively straightforward, and requires no tools.
Installation Instructions
James from Mesquite, TX
Cap came off and melted
Opened door and installed cap. Not much effort. But really got good service from Parts Select. Received order much faster than I had expected.
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on the dishwasher cabinet. It also protects the hardware from moisture, debris, or hard impacts. It is normal for the cap to become damaged or worn down over time due to normal mechanical stress, aging, or accidents. Over time the cap may crack or break, the adhesive backing may wear down or the cover may be unable to stay securely in place. You will need to replace the door cap or the mounting hardware on the exterior panel will be exposed. Simply pull off the faulty cap and snap the new one into place.
This dishwasher door cap guide is a genuine OEM replacement designed for Samsung WaterWall dishwashers. The door cap guide serves an aesthetic purpose by hiding mounting screws or other hardware on the dishwasher cabinet. It also protects the hardware from moisture, debris, or hard impacts. It is normal for the cap to become damaged or worn down over time due to normal mechanical stress, aging, or accidents. Over time the cap may crack or break, the adhesive backing may wear down or the cover may be unable to stay securely in place. You will need to replace the door cap or the mounting hardware on the exterior panel will be exposed. Simply pull off the faulty cap and snap the new one into place.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Installation Instructions
James from Brandon, FL
Rinse Aid Cap was not secured and during dishwaher run the cap sat on the heating coil and melted.
This is simple, we don't know exactly how, but when we used the dishwasher the cap must not have been twisted correctly, and after the dishwasher shut down we discovered the cap was on the heating coil and melted. I know that it was easy to fix, but the reason I ordered it from PartsSelect was their price was much lower than Kitchen Aids,
... Read more
(the maker), Lowes (where we bought it), and other sites we searched for the part.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.
Installation Instructions
Kathryn from WINTERPORT, ME
Rinse aid cap was melted when it came out of the designated spot and melted against the heat coil.
Open the washer door, remove old rinse aid cap. Place new cap into designated spot, screw into place.
This drain pump cover is a genuine OEM component designed to channel water from the sump to the drain pump in select dishwashers. Made from durable gray plastic with a white handle, it ensures proper water flow during the drain cycle, helping maintain efficient performance and prevent blockages. A damaged or missing cover can lead to drainage issues or reduced cleaning effectiveness. Installation involves accessing the sump area and securely fitting the new cover in place. It’s important to verify compatibility with your specific dishwasher model before purchasing, as similar parts may vary slightly in design.
This drain pump cover is a genuine OEM component designed to channel water from the sump to the drain pump in select dishwashers. Made from durable gray plastic with a white handle, it ensures proper water flow during the drain cycle, helping maintain efficient performance and prevent blockages. A damaged or missing cover can lead to drainage issues or reduced cleaning effectiveness. Installation involves accessing the sump area and securely fitting the new cover in place. It’s important to verify compatibility with your specific dishwasher model before purchasing, as similar parts may vary slightly in design.
This OEM-sourced detergent dispenser cover, also known as a rinse aid dispenser lid, seals and protects the detergent compartment in your dishwasher. Typically located on the inner door, it covers the detergent dispenser assembly. When loading the dishwasher, you lift the cover to add rinse aid before running a cycle. If the detergent dispenser cover is broken, you may notice visible cracks, chips, or it may not stay in place properly. If left unreplaced, it can result in detergent leakage during the wash cycle. To remove the cover, first, turn off the power and water supply. Open the dishwasher door and gently insert a flathead screwdriver between the dispenser body and the cover, prying it off. When installing the replacement cover, align it at an angle with the housing and fit one side in before rotating it to snap into place.
This OEM-sourced detergent dispenser cover, also known as a rinse aid dispenser lid, seals and protects the detergent compartment in your dishwasher. Typically located on the inner door, it covers the detergent dispenser assembly. When loading the dishwasher, you lift the cover to add rinse aid before running a cycle. If the detergent dispenser cover is broken, you may notice visible cracks, chips, or it may not stay in place properly. If left unreplaced, it can result in detergent leakage during the wash cycle. To remove the cover, first, turn off the power and water supply. Open the dishwasher door and gently insert a flathead screwdriver between the dispenser body and the cover, prying it off. When installing the replacement cover, align it at an angle with the housing and fit one side in before rotating it to snap into place.
Installation Instructions
Gary from NEW PARIS, IN
Lid for the streak treatment wouldn't stay shut.
Use screwdriver to gently wedge the side of the dispenser body apart enough to pop out the old kid, then insert the new kid in it's place.
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws into the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws into the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly from the manufacturer.
Installation Instructions
Jeffrey from Mildland, MI
Striker
Removed the 4 screws that held the dishwasher in place, tilted it out, removed 2 nut screws on striker, installed new striker and put it back together. Very simple.
Thank you for stocking the parts and shipping them as promised.
Thank you for stocking the parts and shipping them as promised.