My Orders
Whirlpool Microwave Grates
GET YOUR OFFICIAL Whirlpool PARTS TO ENSURE VICTORY
Popular Whirlpool Microwave Grates
This part mounts on the top of the microwave above the door.
This part mounts on the top of the microwave above the door.
Installation Instructions
Richard from San Antonio, TX
Mounting brackets are fragile and plastic support is easily broken
Replaced the intake grille. The grille should be removed prior to cleaning. The entire part is plastic and easily broken so that the two tabs for the mounting screws are shattered and will not hold the part in place. If one attempts to clean the grille using only a moderate amount of pressure with a cloth the fragile plastic will break
... Read more
. The part is poorly designed. When the vent is removed to replace the charcoal filter, one may discover that the grille has already been broken in a previous cleaning operation.
Read less
This is replacement vent grille for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your microwave vent grill is discolored or cracked, or if the mounting brackets for the grill are broken, you may need to replace it. You will need a Phillips-head screwdriver to detach the vent grill from the microwave. This part is made of stainless steel and is approximately 30 inches wide and 4 inches tall. This product is sold individually.
This is replacement vent grille for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your microwave vent grill is discolored or cracked, or if the mounting brackets for the grill are broken, you may need to replace it. You will need a Phillips-head screwdriver to detach the vent grill from the microwave. This part is made of stainless steel and is approximately 30 inches wide and 4 inches tall. This product is sold individually.
Installation Instructions
Susan K from Lacey, WA
While attempting to get some from the cabinet above my microwave, a guest accidently pulled on the top grill vent and caused the plastic screw tap to crack and break leaving the grill vent hanging.
I first went back Lowe's where I purchased my microwave in the hopes they would help in the ordering of the grill vent for my mircrowave. They advised me that they do not order parts and gave me a card of a company to call to order the part. I called the number on the card and was left on hold for 20 minutes then instead of helping me wit
... Read more
h the part I needed they proceeded to set up an appointment for someone in my local area to come to my home, order the part the later install. I knew that it was just 2 screws and bottom snaps to install and I didn't want to wait a week for someone to come to my home. I then went direct to the Whirlpool web-site and found "Partselect.com". I was unable to match my model# even though my microwave was only 13 months old but knew it was probably interchangeable with another so I then called "Partselect.com" and was just amazed at how helpful and knowledgeable the gentleman on the other end was. He found my part and was very patient in describing it to me to assure that it was the correct one. I was on the phone less than 10 minutes with him. The part came in 3 days and was the correct part:) It took me less than 5 minutes to gently snap the 2 bottom tabs in and screw in the left and right tabs on top. Thank you so much "Partselect.com" for making what could have been a timely and expensive part replacement be so very simply and inexpensive.
Read less
This vent grille mounts on the top of the microwave above the door.
This vent grille mounts on the top of the microwave above the door.
Installation Instructions
J Richard from Long Beach, MS
Broken grill
Adjusted clips inserted grill less then two minutes.It took me longer to unwrap the package then it took to install.Ordered part on line 10:45 am delivered 2:30 pm next afternoon.Less then 28 hours later. What service.
The vent grille mounts to the top of the microwave, above the door. If you notice that your vent grille is damaged, or your door is not closing properly, you may need to replace the vent grille. This vent grille is black in color and is made of plastic. This part is approximately 30 inches in length, by 3.5 inches in height. This part is sold individually and can be used on stainless models. Many of our customers have rated this repair as easy. To complete the repair, simply unscrew the damaged vent grille, and screw on the replacement part.
The vent grille mounts to the top of the microwave, above the door. If you notice that your vent grille is damaged, or your door is not closing properly, you may need to replace the vent grille. This vent grille is black in color and is made of plastic. This part is approximately 30 inches in length, by 3.5 inches in height. This part is sold individually and can be used on stainless models. Many of our customers have rated this repair as easy. To complete the repair, simply unscrew the damaged vent grille, and screw on the replacement part.
Installation Instructions
Bobby from Shelley, ID
old vent grill broken
Removed to screws from oven to grill. removed grill. put in new grill and replaced the two screws.
The vent grille, used in microwaves, mounts on the top of the appliance and covers parts inside the microwave without blocking off airflow. Instead, the vent allows air to pass through the slats. If the vent is blocked or damaged, it is best to repair the vent grille. To repair, first remove the screw that holds the grill tabs with a Phillips screwdriver and clean the vent area. Next, install new grill into the appropriate tabs and make sure to secure the screws to prevent it from falling. Refer to the manual provided by the manufacture for installation instructions and accurate guidance. Remember to unplug appliance from power source.
The vent grille, used in microwaves, mounts on the top of the appliance and covers parts inside the microwave without blocking off airflow. Instead, the vent allows air to pass through the slats. If the vent is blocked or damaged, it is best to repair the vent grille. To repair, first remove the screw that holds the grill tabs with a Phillips screwdriver and clean the vent area. Next, install new grill into the appropriate tabs and make sure to secure the screws to prevent it from falling. Refer to the manual provided by the manufacture for installation instructions and accurate guidance. Remember to unplug appliance from power source.
Installation Instructions
Lawrence from Langhorne, PA
Replaced vent grill and grease filters
The repair was simple and easy. It required a Phillips head screw driver only. I Removed the vent grill and replaced it with the new grill there were only two screws that needed to be removed then refastened. Total five minutes. I also replaced the grease filters which took about a minute total time. I do many of my own repairs to my hom
... Read more
e and appliances .I've found your service parts delivery prompt and precise.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This vent grille, also referred to as a grill-vent, is a genuine OEM component designed to cover the microwave’s exterior vent opening while allowing proper airflow. It serves a dual purpose: protecting internal components from physical impact and heat exposure, and supporting efficient ventilation to prevent overheating. Typically finished in black, the grille contributes to the appliance’s overall appearance while maintaining performance. Common reasons for replacement include damage from impact, warping due to heat, or general wear over time. Installation is straightforward and restores both function and aesthetics.
This vent grille, also referred to as a grill-vent, is a genuine OEM component designed to cover the microwave’s exterior vent opening while allowing proper airflow. It serves a dual purpose: protecting internal components from physical impact and heat exposure, and supporting efficient ventilation to prevent overheating. Typically finished in black, the grille contributes to the appliance’s overall appearance while maintaining performance. Common reasons for replacement include damage from impact, warping due to heat, or general wear over time. Installation is straightforward and restores both function and aesthetics.
Installation Instructions
Sara from HONEA PATH, SC
Vent grille fell off due to cracked pieces
Simply removed old screws from the remaining pieces still attached to my microwave. Cleaned up all surfaces. Put new grille into place. Replaced screws in the holes. Went great. Part fits perfectly.
This white plastic vent grille mounts on the top of the microwave above the door, and covers components inside the microwave while allowing airflow through the slats. If the door on your microwave will not close properly, the vent grille could be at fault. If you notice that the vent grille is discolored, cracked, or broken, or if the mounting brackets on the grille are damaged or broken, you should replace the part. To replace the part, you will only need a Phillips head screw driver. Make sure this part is compatible with your microwave before ordering. This part does not include the screws used to mount it to your microwave.
This white plastic vent grille mounts on the top of the microwave above the door, and covers components inside the microwave while allowing airflow through the slats. If the door on your microwave will not close properly, the vent grille could be at fault. If you notice that the vent grille is discolored, cracked, or broken, or if the mounting brackets on the grille are damaged or broken, you should replace the part. To replace the part, you will only need a Phillips head screw driver. Make sure this part is compatible with your microwave before ordering. This part does not include the screws used to mount it to your microwave.
Installation Instructions
Michael from Myrtle Beach, SC
Vent Grill was broken
I slid the new grill into position and secured it with the original two screws. Could not have been easier.
This grille vent mounts on the top of the microwave above the door.
This grille vent mounts on the top of the microwave above the door.
Installation Instructions
Florence from East Setauket, NY
vent cracked
just screwed in the new part
This vent grille mounts on the top of the microwave above the door.
This vent grille mounts on the top of the microwave above the door.
Installation Instructions
Henricus from GAINESVILLE, GA
Plastic grille vent became brittle over time and broke when changing charcoal filter.
Replacing the grill is so ridiculously simple (two small screws) that it is hardly worth writing "instructions" for it.
However, ordering the right part is a problem. My microwave has a stainless steel exterior but on your parts list there is no part clearly identified as such. Only black and white. Then there's one for which a ... Read more n "image is not available" so I figured perhaps that might be it. However I received the white part in the mail.
I then enquired if the part with a stainless steel exterior was available, or just its broken plastic base so that I could transfer the stainless steel wrap from the broken piece. The white plastic part that I received does not have certain slots to attach the stainless steel wrap.
However, you merely confirmed that the part I received was white so that was not very helpful. I installed the white part and it looks absolutely horrible on top of a stainless steel oven but it is what it is. But not too happy with your service and website to be quite honest.
However, ordering the right part is a problem. My microwave has a stainless steel exterior but on your parts list there is no part clearly identified as such. Only black and white. Then there's one for which a ... Read more n "image is not available" so I figured perhaps that might be it. However I received the white part in the mail.
I then enquired if the part with a stainless steel exterior was available, or just its broken plastic base so that I could transfer the stainless steel wrap from the broken piece. The white plastic part that I received does not have certain slots to attach the stainless steel wrap.
However, you merely confirmed that the part I received was white so that was not very helpful. I installed the white part and it looks absolutely horrible on top of a stainless steel oven but it is what it is. But not too happy with your service and website to be quite honest.
Read less
This biscuit grille vent mounts on the top of the microwave above the door.
This biscuit grille vent mounts on the top of the microwave above the door.
Installation Instructions
Donald from NORTH AUGUSTA, SC
Broken Vent Grill
Removed two Phillips head screws, installed the new Vent Grill, and carefully reinstalled the old screws, being sure not to over tighten them.