EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Whirlpool Dishwasher Racks

Popular Whirlpool Dishwasher Racks

Your Price
$50.56
  In Stock
Whirlpool Dishwasher Dish Rack Adjuster Kit - Left And Right Side
★★★★★
★★★★★
1086 Reviews
PartSelect Number PS10064063
Manufacturer Part Number W10712394
This rack adjuster kit (Dishrack Adjuster Kit, Adjuster Kit, Dishwasher Rack Adjuster) will adjust the height of the upper rack of your dishwasher. It connects to the dishrack. The kit is constructed of grey plastic and metal, and measures approximately 12 inches wide and 6.5 inches tall. The rack adjuster can break from material fatigue or prolonged high temperature exposure. High temperature exposure can compromise the integrity of the materials. If the rack adjuster breaks, your upper rack may fall down, may be unlevel, or the door may not close. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design (2 adjuster assemblies, 1 left hand and 1 right hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings)
Fixes these symptoms
  • Door latch failure
  • Door won’t close
  • Leaking
  • See more...
Installation Instructions
Paul from Encinitas, CA
Replace rack adjusters - wheel were broken
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides together. Piece of cake Read more...
Your Price
$174.20
  In Stock
Whirlpool Dishwasher Lower Dishrack
★★★★★
★★★★★
32 Reviews
PartSelect Number PS10057160
Manufacturer Part Number W10728159
This lower dishrack is a genuine replacement component designed for select Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef dishwashers. Manufactured for durability and optimal performance, it securely holds plates, bowls, and other dishware during wash cycles. The rack is finished in gray, though the shade may vary slightly, and does not include rollers, which must be transferred from the original rack. Installation is straightforward and can be completed using basic hand tools, provided the dishwasher is disconnected from power and water sources. This replacement is ideal for racks that are cracked, rusted, peeling, or stained, helping restore both functionality and appearance.
Fixes these symptoms
Installation Instructions
Peter from WESTMONT, IL
Broken cheap plastic wheels lower rack
Popped out old wheel housing. Popped in replacement with a little help from a flathead screwdriver. Easy. Read more...
Your Price
$188.90
  In Stock
Whirlpool Dishwasher Lower Dishrack Kit
★★★★★
★★★★★
15 Reviews
PartSelect Number PS2378335
Manufacturer Part Number W10311986
The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 22-inch x 21-inch. The rack is light gray in color with wheels included, lower fold down, and a flexrow retainer. This is a genuine OEM part.
Installation Instructions
pat from muncy, PA
bottom rack was starting to rust away and we needed a new one
The dishrack came in one box I opened the box snapped on the rollers and the bumpers and put it in the dishwasher, could not have been easier Thank you partselect Read more...
Your Price
$363.24
  In Stock
Whirlpool Dishwasher Lower Dishrack Kit
★★★★★
★★★★★
10 Reviews
PartSelect Number PS1964469
Manufacturer Part Number W10161215
The lower rack provides easy loading with flexibility for small and large items and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.669-inch x 20.157-inch.This is a genuine OEM part.
Your Price
$145.33
  In Stock
Whirlpool Dishwasher Lower Dishrack
★★★★★
★★★★★
1 Review
PartSelect Number PS10057157
Manufacturer Part Number W10727679
Wheels NOT included.
Installation Instructions
Rick from WHITTIER, CA
Lower dishrack sections rusting out
Put new rack by old rack. Carefully remove a wheel assembly off old rack, then installed on new rack. Did this 3 more times. Then remove front tab clips off old rack & installed on new rack Read more...
Your Price
$217.21
  In Stock
Whirlpool Dishwasher Lower Dishrack
★★★★★
★★★★★
21 Reviews
PartSelect Number PS11727812
Manufacturer Part Number W10833650
This dishrack is for dishwashers. Dishrack holds the dishes in place during the dishwashing cycle.
Installation Instructions
Carol from Richmond Hill, GA
The old rack was rusty leaving stains on our china
The new rack came with four parts... those four parts were the wheels that the rack rides on to slide it into the dishwasher. You will need to recycle two rubber bumpers, your old utensil basket and the cone in the center of the rack. Getting the cone free was not easy. It has to be rotated to release it from the wire rack. I had to pry it free with a screwdriver. Once rotated it lifted out easily. I noted how the cone lined up in the old rack and installed it the same way in the new rack. It was much easier to install than remove. The new rack has a gray tinge to it but fits perfectly and we are pleased with the end result. Read more...
Your Price
$216.60
  In Stock
Whirlpool Dishwasher Rack-1lr Fb Double Wire St 1fd
PartSelect Number PS17216765
Manufacturer Part Number W11690157
Your Price
$192.89
  On Order
Whirlpool Dishwasher Rack Upr Asm Fin Onyx Blk
★★★★★
★★★★★
1 Review
PartSelect Number PS16875896
Manufacturer Part Number W11661174
Is your home appliance playing up? You may be in need of our genuine HARNS-WIRE by Whirlpool, a highly effective solution to restore your device's efficiency. This Wiring Harness serves as the crucial link, connecting electrical components to your appliance?s source of energy. It works wonders in laundry centers, ensuring a smooth and optimal operation. Without it, your appliance might not function as efficiently as it should. This part is backed by Whirlpool's assurance of quality and has been specifically created for use in a range of popular models, including KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. To guarantee a safe installation experience, we recommend you unplug your appliance before starting and slip on work gloves to protect your hands. While this Harness might resemble other pieces you?ve seen, rest assured that the size and shapes might vary slightly. That?s why it's important to confirm the compatibility of your device with the HARNS-WIRE to maximize efficiency. With this Wiring Harness in place, you can breathe easy knowing your machine will be back to running like brand new. Restore the heartbeat of your appliance today with our Whirlpool HARNS-WIRE.
Your Price
$193.03
  In Stock
Whirlpool Dishwasher Rack-2lr Bar3 3fix Fin Ps
PartSelect Number PS17216053
Manufacturer Part Number W11672788
This rack assembly provides stable support for holding items securely during appliance operation. Its structured design allows for efficient spacing and airflow while maximizing usable capacity. Replacing a bent or damaged rack helps restore proper functionality and load stability.
Your Price
$328.51
  On Order
Whirlpool Dishwasher Lower Dishrack Assembly
★★★★★
★★★★★
1 Review
PartSelect Number PS11703300
Manufacturer Part Number W10780925
Rollers & dividers are no longer included. Must order separately.
Installation Instructions
Allen from Jacksonville, NC
Replaced old dish racks that had rusted and had broken tines.
Took the old wheels, and other parts from the old racks and installed them on the new. The wheels on the lower rack just snap on. Also the folding tines just snapped on. On the upper rack the brackets that hold the wheels have two screws that hold the bracket. I removed them and then installed the bracket on the new rack in the same position as on the old one. The only hard part was getting the old spray arm off the old rack. I had no directions so I had to figure it out for myself. I finally cut the the old rack to get the pressure tower off. It was stuck because of having been in place for more than ten years. Putting the tower and the arm on the new rack was no problem once I had it removed. Total time to do the job about 45 minutes. Read more...

Related Whirlpool Dishwasher Parts