Whirlpool Dishwasher Brackets and Flanges | Replacement Parts & Accessories | PartSelect

Popular Whirlpool Dishwasher Brackets and Flanges

Your Price
$8.27
Mounting Bracket
PartSelect Number PS11745496
Manufacturer Part Number WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear at the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Fixes these symptoms
Door latch failure
Door won’t close


Installation Instructions
Judith from Essex, MA says,

Lost dishwasher brackets
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided m...read more

Your Price
$14.63
Side Mounting Bracket Kit
PartSelect Number PS1487167
Manufacturer Part Number 8212560
This mounting kit can be used on solid surface countertops.
Fixes these symptoms
No Symptoms for this part
Your Price
$29.66
Water Inlet Tube Holder
PartSelect Number PS11745473
Manufacturer Part Number WP8268843
*Part is manufactured with a split in the ring.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
David from Louisville, KY says,

tube holder lost its shape and began hanging preventing upper tray from closing
repair was simple and easy; just make sure you install the holder in the same direction and on same upper-tray prongs to prevent having to remove them to switch around (ensures spinner works properly)...read more

Your Price
$23.31
Middle Wash Arm Tube Holder
PartSelect Number PS11741346
Manufacturer Part Number WP3378186
This holder should have a split in the ring at 3 o'clock position.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Laura from Marietta, GA says,

The original, detachable hose portion developed a hole and needed replacement
Pretty simple. Hardest part was working the end clips of the slide to remove top rack. You simply need to squeeze the plastic clip in to slide it out. Once the top rack is out, it was an obvious ph...read more

Your Price
$18.23
BRACKET
PartSelect Number PS11727941
Manufacturer Part Number W10837623
Fixes these symptoms
No Symptoms for this part
Your Price
$6.44
Spray Arm Tube Hanger
PartSelect Number PS11745439
Manufacturer Part Number WP8268349
Fixes these symptoms
Not cleaning dishes properly


Your Price
$23.33
Dispenser Mounting Bracket
PartSelect Number PS11755103
Manufacturer Part Number WPW10462232
Fixes these symptoms
Will not dispense detergent


Your Price
$18.53
Spray Arm Feed Tube Holder
PartSelect Number PS11741382
Manufacturer Part Number WP3385160
This part holds the spray arm feed tube up.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
ken from elwood, IN says,

Broken top mount for spray arm
Had to use a standard flat screw driver to pry off the old mount. used a phillpips head driver to fasten the mount to the spray arm and pushed the new mount in place....read more

Your Price
$4.97
Spray Arm Holder
PartSelect Number PS11745433
Manufacturer Part Number WP8268325
This part holds up the dishwasher spray arm tube.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Steven from Cicero, NY says,

top rack wouldnt line up due to broken adjuster
popped cover off broken adjuster and replaced it with new cover and supplied screws. Old holder also broke and that just popped into place. Dishes on top rack now are clean!...read more

Your Price
$22.27
SUPPRT-HTR
PartSelect Number PS11770271
Manufacturer Part Number W11027055
Fixes these symptoms
No Symptoms for this part