Control panel buttons were worn out, circuit board shorted out
Turned off the power at the breaker; took the screws out of the door panel; the control panel was already loose; I took the lock mechanism off the panel, and then removed the electric bundle panel fro...read more

Lights flashing on the selections and nothing but the cancel button working
Take the 6 torx screws loose and pull down the face. Pop out the bi-metal fuse that is in the current board. Unhook the wires attached. Pop out the old board. Attach the wires to new board. Put the bi...read more

Dishwasher was taking way too long to go through its normal cycle; the indicator lite did not advance to DRY.
Remove just the 6 Phillips screws holding the control panel assembly to the top of the door. Panel lifted off, clearing the latch assembly. Rested it on my knees as I sat in front on a chair. Control...read more

Dishwasher wouldn't right, Cycle options not functioning correctly
Dishwasher quit running. I could get all of the lights on the panel to light in test mode. So I knew the panel had power. However, if I tried to set any of the Cycle options.. .the dishwasher would...read more