EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3847 - Instructions

All Instructions for the 3847
76 - 90 of 214

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
freezer stoped freezing
2 of 2 people found this instruction helpful.
  • paul from ENDICOTT, NY
  • Very Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
my freezer quit freezing, it would freeze for one day, thaw the next, so I went online, found PARTS SELECT, LOOKED UP MY MODEL #, come to find out it needed three parts to keep my freezer to freeze, first part was a thermistor a small PART took me longer to remove all the covers, and shelving, PULLED THE OLD OUT, CUT THE WIERS TO SIZE, AND REINSTALLED, IT WELL! THAT WASN'T ENOUGH THE FREEZER STILL DIDN'T FREEZE IT THOUT IT WAS A COOL WORMING OVEN, HAD TO INSTALL THE THERMISTOR I, SO I DID, TEN MIN, NOW I THOUGHT THAT WAS IT BECAUSE IT STAYED FROZEN FOR A WEAK, HAVE YOU EVER EATEN SOUPY ICE CREAM? SO BACK TO PARTS SELECT, THIS TIME I BOUGHT ONE MORE PT, THE RUN CAPACITOR, FIVE MIN, THAT/S ALL IT TOOK TO INSTALL. I DID NOT KNOW AT THE TIME YOU NEED THE THREE OF THEM TO RUN THE FREEZER ONE TO KEEP THE TEMP., ONE TO KEEP THE FAN RUNNING THE WAY IT SHOULD, AND THE THIRD TO MAKE SURE THE OTHER TWO KEEP RUNNING. NOW I CAN SET IT AT 4- 5 AND. FREEZE.
Was this helpful?
Thank you for voting!
refrigerator would not get cold
2 of 2 people found this instruction helpful.
  • George from BERLIN, MD
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
got on part select web site and found other customers that had same problem and on their site they had comments from them to fix problem. I then took off back panel on frig where compressor is by removing 6 screws and found the relay attached to the compressor then pressing down on holding spring removed 2 wire alligator clips and it was bad ordered one from part select put the new one on an frig was fixed. entire fix took about 30 minutes from isolating problem to fixing it. thank you part select
Was this helpful?
Thank you for voting!
The Refridgerator and Freezer were not cooling.
2 of 2 people found this instruction helpful.
  • Frank from VERO BEACH, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Installing the part repaired the fridge and freezer immediately.
Was this helpful?
Thank you for voting!
Freezer not working
6 of 14 people found this instruction helpful.
  • Joyce from Barns City, IA
  • Really Easy
  • 15 - 30 mins
  • Socket set
Remove fan, unplug parts, plug in new parts replace fan. DONE
Was this helpful?
Thank you for voting!
I didn't know if I could get a replacement part, but I googled "replacement parts" (or some such), and since this website looked easy to navigate, chose it. (Actually, I did my ordering via telephone). The sales rep. helped me clarify which part I needed, I ordered it, and received the part the very
2 of 2 people found this instruction helpful.
  • Kaye from San Francisco, CA
  • Really Easy
  • Less than 15 mins
I simply snapped the two end pieces into place, attaching the guard rail. It was like putting the pieces of a very easy puzzle together‚ especially for someone like myself who is mechanically challenged.
Was this helpful?
Thank you for voting!
Not cooling and freezer freezing up
6 of 14 people found this instruction helpful.
  • kenneth from carmel, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the condenser cover removed old fan blade defrosted the condenser section installed new blade and reassembled
Was this helpful?
Thank you for voting!
Broken shelf retainer bar end cap.
2 of 2 people found this instruction helpful.
  • Ruchik from Bronx, NY
  • Really Easy
  • Less than 15 mins
I ordered 2 end caps just to keep one as spare. Turned out I had ordered a size larger than the one already on the refrigerator. So I replaced both ends and it worked fine - with increased shelf space. Now I can even fit a gallon container with ease!!! Took about 20 seconds. I just wish there was an easier way to measure parts before orde ring. Otherwise, the entire process from order to finish took about 3 days.
Was this helpful?
Thank you for voting!
light kept blinking on and off never same way
2 of 2 people found this instruction helpful.
  • michael from CENTRALIA, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
turn breaker off first then use thin blade screwdriver and plastic pry bar to remove light socket and switch there was plenty of wire so work was easy to install at both ends
Was this helpful?
Thank you for voting!
light wouldn't come out of socket
3 of 5 people found this instruction helpful.
  • Joyce from Tacoma, WA
  • Really Easy
  • Less than 15 mins
It just unpluged and the new one plugged in. Simple. The part was reasonable and arrived very quickly. It sure is nice to have a light in the frig again.
Was this helpful?
Thank you for voting!
Cap on the door retainer bar broke.
2 of 2 people found this instruction helpful.
  • Mary from New Milford, NJ
  • Really Easy
  • Less than 15 mins
The replacement cap fit perfectly. Unfortunately when the orinigal cap broke it tookout a small piece of the surrounding plastic leaving nothing for the new cap to catch. I have the piece and tried several kinds of glue but nothing holds it securely enough. I would however readily recommend your company. The service was terrific.
Thank you.
Was this helpful?
Thank you for voting!
Light would no longer turn on
3 of 6 people found this instruction helpful.
  • paypal_shipping_address from Ripon, CA
  • Really Easy
  • Less than 15 mins
  • Pliers
I watched the video online, followed the instructions and within minutes had the part installed. The frig light was working once again! I will say the original switch was very snug and I had to do some very minor scraping of the plastic to get the new part to slide in.
Was this helpful?
Thank you for voting!
The plastic parts that hold the brackett to the shelf were broken.
2 of 3 people found this instruction helpful.
  • Sammy from Farmington, NM
  • Really Easy
  • Less than 15 mins
The part just snapped into the shelf bar. Extremely easy to fix. Since you show the part in a grid I was able to tell, by holding my old piece up to the screen, that the new part would be the correct size. We have rentals and are always needing parts for appliances. Impossible to find locally.
Also the part came so quickly it was al most as good as buying it here in town. Thanks. Donna Bingham
Was this helpful?
Thank you for voting!
broken part
2 of 3 people found this instruction helpful.
  • Michael from E. Hartland, CT
  • Really Easy
  • Less than 15 mins
  • Nutdriver
easy - replaced it

i am totally impressed with your company how effective it is.... i will go to yours if anything is broken or replaced

thanks
Was this helpful?
Thank you for voting!
Noise in the back of freezer
3 of 6 people found this instruction helpful.
  • MaryLou from Levittown, NY
  • A Bit Difficult
  • Less than 15 mins
I must thank yo for sending the fan so fast. If I ever have to deal with any appliance again, you are first on my list.
Was this helpful?
Thank you for voting!
Light out
2 of 3 people found this instruction helpful.
  • Jodi from Benton Harbor, MI
  • Very Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Turned off the breaker to the fridge because I couldn't reach the power plug to unplug it . Use small flat head screwdriver to pop out the piece, disconnected the rubber prong connectors, inserted the new piece into the rubber prongs snapped it back into place. Flipped the breaker back on and prayed it worked. It did and I saved myself $ 120 service call.
Was this helpful?
Thank you for voting!
All Instructions for the 3847
76 - 90 of 214