My Orders
Maytag Range Motors
GET YOUR OFFICIAL Maytag PARTS TO ENSURE VICTORY
Popular Maytag Range Motors
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
Installation Instructions
Mark from Fremont, NE
Wife told me Dryer would make a funny sound, then stop + had an a funny smell as well. The Electric motor that drove the unit was overheating and locking up, It was time to be replace.
The best part of my repair was I had everything back in service in 3 days. And one of these days was to consider just buying a new dryer. Had parts overnited and all parts fit and easy to replace.
1) Removed back - 6 screws
2) Removed dryer vent - 2 screws on top, 3 on bottom
3) Popped the top open
4) Removed Fro ... Read more nt of dryer cabinet - 2 screws
5) Removed Belt
6) Removed Drum
7) Cleaned up all lint
8) Pop off motor retainers front and back
Here is the tricky part for me.
9) Removed vent fan on back of motor.
I did not know that the back of the fan was square, and you could put an open ended wrench on it to hold it while you also have a vice grip on the front motor shaft. Then its a simple left to loosey operation. I first tryed to turn the fan blade to take it off, but proved to be to tight.
10) Repeat backwards to reassemble
While I had it apart I also replaced the Drum support rollers & Installed a new belt. Not that diffucult of a repair Good Luck, was certainly better than buying a new one at + $300.00 at Black Friday rates.
1) Removed back - 6 screws
2) Removed dryer vent - 2 screws on top, 3 on bottom
3) Popped the top open
4) Removed Fro ... Read more nt of dryer cabinet - 2 screws
5) Removed Belt
6) Removed Drum
7) Cleaned up all lint
8) Pop off motor retainers front and back
Here is the tricky part for me.
9) Removed vent fan on back of motor.
I did not know that the back of the fan was square, and you could put an open ended wrench on it to hold it while you also have a vice grip on the front motor shaft. Then its a simple left to loosey operation. I first tryed to turn the fan blade to take it off, but proved to be to tight.
10) Repeat backwards to reassemble
While I had it apart I also replaced the Drum support rollers & Installed a new belt. Not that diffucult of a repair Good Luck, was certainly better than buying a new one at + $300.00 at Black Friday rates.
Read less
This control panel cooling fan is a blower motor assembly designed to regulate airflow within the control panel area of select ranges and ovens. Engineered to prevent overheating, it helps maintain optimal operating temperatures for electronic components, thereby extending their lifespan and ensuring consistent performance. The assembly includes a hall sensor for precise monitoring and is intended to replace older fan models across a variety of compatible units. Common symptoms of a failing fan—such as low-speed errors, stalling, or smoke—can be resolved with this replacement.
This control panel cooling fan is a blower motor assembly designed to regulate airflow within the control panel area of select ranges and ovens. Engineered to prevent overheating, it helps maintain optimal operating temperatures for electronic components, thereby extending their lifespan and ensuring consistent performance. The assembly includes a hall sensor for precise monitoring and is intended to replace older fan models across a variety of compatible units. Common symptoms of a failing fan—such as low-speed errors, stalling, or smoke—can be resolved with this replacement.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
Installation Instructions
Richard from EUGENE, OR
FE80 Error, blower motor underperforming
Remove cover under controls, unscrew rangetop (front only). Motor on right side of oven directly under rangetop detaches with 3 screws and remove with care. Swap foam seal to new motor and install. May require contact cement to attach seal to new part.
This motor isolator is less than an inch long.
This motor isolator is less than an inch long.
Installation Instructions
John from Berkley, MI
Blower motor died and I needed to replace it
Most of the repair was obvious as I took the blower apart before ordering the parts. Unfortunately the new motor was significantly larger than the original motor so I had to um. Adjust the position of some of the other parts to fit it in. There was a sheet metal flange that was installed on the other side of the blower from the motor whi
... Read more
ch was designed to focus the air flow into the blower. I used a hammer to ajust the angle of flange so it no longer extended as far into the blower housing.
It works just fine although its a bit louder than the old motor was.
It works just fine although its a bit louder than the old motor was.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This convection fan motor circulates hot air throughout the oven cavity to promote even heating and consistent cooking results. Operating at 240 volts, it supports proper airflow during convection baking and is often replaced to resolve noise issues or uneven temperature performance.
This convection fan motor circulates hot air throughout the oven cavity to promote even heating and consistent cooking results. Operating at 240 volts, it supports proper airflow during convection baking and is often replaced to resolve noise issues or uneven temperature performance.
This fan motor drives airflow for cooling or ventilation as required. Proper air movement helps maintain stable operation and efficiency. Replacing a failing motor restores quiet, reliable airflow.
This fan motor drives airflow for cooling or ventilation as required. Proper air movement helps maintain stable operation and efficiency. Replacing a failing motor restores quiet, reliable airflow.
This blower motor moves air through the appliance to support ventilation, cooling, or heating functions. Proper airflow helps maintain efficiency and protect internal components. Replacing a worn or noisy blower motor can restore consistent performance.
This blower motor moves air through the appliance to support ventilation, cooling, or heating functions. Proper airflow helps maintain efficiency and protect internal components. Replacing a worn or noisy blower motor can restore consistent performance.