Inside Of Knob Busted Out, Would Not Turn Ignitor.
Actually too simply to list as diy job. Merely remove old knob and push new one onto spindle. ...read more

Agitator wouldn't spin
Pulled the cap off, used a 7/16" socket with 10" extension, lifted the agitator off, cleaned & installed the repair kit, very simple repair....read more

Had To Change The Knob I Could Not Read It
Pulled the old knob off and put the new one on. Only thing that was difficult was making sure the knob was the right one because the instructions kept leading me back to a different brand of applianc...read more

my 10 yr old Maytag solid top stove looked/worked great except for yellowed parts
We don' t ever do repairs on appliances. And guidelines say replace, don't repair 10 yr old appliances. But a new unit looked around $1,000.
What could we do?

I found screw holes o...read more

knobs were worn out
Took the old knobs off, then replaced with new knobs....read more

Thermostate seized up (wouldn't turn)
Removed the burners, unscrewed the gas assembly from the stove top, removed the two screws securing the thermostat, pulled out the old thermostat, installed new thermostat and put back together in re...read more