My Orders
Jenn-Air Cooktop Valves
GET YOUR OFFICIAL Jenn-Air PARTS TO ENSURE VICTORY
Popular Jenn-Air Cooktop Valves
This part distributes flame evenly to your cookware.
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more
two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read less
This burner assembly is designed for a small burner on a gas range or cooktop and includes the burner head and spark electrode. The burner head directs gas through precision openings to create a steady, controllable flame, while the electrode ignites the gas for reliable operation. A worn or damaged assembly can cause issues such as weak flames, uneven heating, or failure to ignite. Replacing this part restores proper burner performance and ensures safe, efficient cooking. Installation is straightforward—remove the old assembly and secure the new one using existing hardware.
This burner assembly is designed for a small burner on a gas range or cooktop and includes the burner head and spark electrode. The burner head directs gas through precision openings to create a steady, controllable flame, while the electrode ignites the gas for reliable operation. A worn or damaged assembly can cause issues such as weak flames, uneven heating, or failure to ignite. Replacing this part restores proper burner performance and ensures safe, efficient cooking. Installation is straightforward—remove the old assembly and secure the new one using existing hardware.
Installation Instructions
Michael from South Lake Tahoe, CA
BURNER KNOBS MELTED, Burned out electrode
R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy
Installation Instructions
Josh from Yucaipa, CA
Bad regulator
We were building a house and had a very tight budget. We wanted our cabinets and granite to fit high end appliances so we wouldn't have to do a complete remodel to upgrade appliances. We got our appliances used but it good shape. We cleaned them up and replaced anything that looked worn. I saw our same appliances at the hardware store. Th
... Read more
e oven was $1800 and the range was $800. We paid $500 for both and around $100 in parts. The appliances work perfect and look brand new. No one knows they were used appliances and we got to spend the savings on the nicer granite!
Read less
This is the Right Rear Burner Head.
This is the Right Rear Burner Head.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more
two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part distributes flame evenly to your cookware.
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are
... Read more
two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read less
Sold individually.
Sold individually.
This Medium Surface Burner Cap is a genuine OEM part designed for Whirlpool appliances. This part is primarily used for ranges, fitting accurately on top of the burner head. The cap is intricately manufactured to shield the burner head from spills while also helping to distribute the burner flame evenly, ensuring efficient heating. For installation, please ensure the surface is cool to touch. While this burner cap might exhibit similarities to other parts, minor variations in size and shape make it unique. Trust this Whirlpool burner cap for a long-lasting and quality performance.
This Medium Surface Burner Cap is a genuine OEM part designed for Whirlpool appliances. This part is primarily used for ranges, fitting accurately on top of the burner head. The cap is intricately manufactured to shield the burner head from spills while also helping to distribute the burner flame evenly, ensuring efficient heating. For installation, please ensure the surface is cool to touch. While this burner cap might exhibit similarities to other parts, minor variations in size and shape make it unique. Trust this Whirlpool burner cap for a long-lasting and quality performance.