Jenn-Air Cooktop Cooktops
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenn-Air Cooktop Cooktops
Your Price
$232.24
In Stock
Jenn-Air Cooktop Cartridge 4 Spades - Stainless Steel
PartSelect Number PS8769936
Manufacturer Part Number JEA7000ADSA
Upgrade your cooktop with this easy-to-install electric coil cartridge, perfect for replacing worn-out burners and restoring consistent heat. The sleek stainless steel housing holds two coil burners—one large (2100W) and one small (1250W)—giving you the flexibility to cook everything from quick breakfasts to hearty dinners. Compatible with a variety of ranges, this module is a simple way to refresh your kitchen setup. Sold as a single unit.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
Laurel from Houma, LA
I have a 26 year old stove top and the electric coils heated intermittantly. I got tired of banging on them to get them to work. I went to various local stores ( Lowe's, appliance stores) and the parts would have been twice the cost and taken a while to come in. I then googled your site and found
I popped out the old burner cartridges and gladly threw them away and popped in the new ones. They work great and no banging! I changed out the old grease filter in the down draft and put the new grill grate on top of the grill in seconds. The timer knob fit well but the burner knobs did not so I had to return those. My "new" stove top looks basically the same except new. The grill grate being black updates the look somewhat. The best thing is that the burners work. Thanks for everything.
Read more...
Your Price
$535.66
In Stock
Jenn-Air Cooktop Maintop Glass - Black
2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work. Read more...
PartSelect Number PS2341162
Manufacturer Part Number 7920P202-60
This black frameless glass cooktop serves as the primary cooking surface for select electric ranges, designed to accommodate radiant burners or induction coils. Constructed from durable, scratch-resistant glass, it offers a sleek, modern appearance while providing a stable and easy-to-clean surface. The frameless design enhances the aesthetic of the appliance and allows for seamless integration with the range. Compatible with various models from Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, and other affiliated brands, this genuine OEM replacement part ensures reliable performance and long-term durability. Model verification is recommended prior to installation.
Installation Instructions
Timothy from huntsville, AL
Cracked Galss Stovetop
1. Removed potand pans from under stovetop.2. Disconnected exaust duct.
3. Raised the stove and placed wooden blocks under.
4. Unscrewed old top,and removed.
5. Placed new stovetop on stove, screwed into place.
6. Fresh caulk around opening.
7. Lowered stove into place.
8. Reconnedted duct work. Read more...
Your Price
$250.82
In Stock
Jenn-Air Cooktop Stove Cartridge Assembly
PartSelect Number PS9491819
Manufacturer Part Number JEA7000ADBA
This stove cartridge assembly, also known as a cooktop module, is a manufacturer-approved replacement part for your stove. It is black in color and comes complete with burner elements. Make sure to shut off power to the unit before replacing this part.
Fixes these symptoms
- Element will not heat
- See more...
Installation Instructions
John from Corfu, NY
Old element was worn out (burst in line)
First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end of the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine.
Read more...
Your Price
$558.72
In Stock
Jenn-Air Cooktop Main Range Top
PartSelect Number PS2084686
Manufacturer Part Number 74007072
This range top is black in color and is made of metal and glass. This top assembly has four holes for burner knobs.
Your Price
$454.07
On Order
Jenn-Air Cooktop Glass - Black
PartSelect Number PS11754193
Manufacturer Part Number WPW10396765
Presenting the Glass Cooktop in elegant black, a reliable and genuine OEM part from the esteemed brand Whirlpool. This authentic component integrates seamlessly with certain models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef appliances. The distinguished feature of this cooktop is its size and shape, crafted thoughtfully to ensure compatibility with your model. While ensuring you with the reduction of small variations making it an excellent choice for those seeking parts with precision in design and superior functionality. Please make sure to confirm that this is the right part for your model before ordering it from our website. Trust our Whirlpool cooktop for efficient, effective, and optimal performance.
Your Price
$139.36
In Stock
Jenn-Air Cooktop Cook Top Base
ALSO, take close note of the orientation of the cook top base, one end has a lip that's allows for burner assembly removal.
Remove entire two burner assembly, place upside down on newspaper, remove seven Phillips screws, remove assembly bottom.
Remove small screws from gas tubes, pay close attention as you remove the gas tube from the bottom of the burner, to the orientation of the two washers (the washers have an edge).
Remove the burner tubes and washers.
Carefully remove the igniter connectors from igniter.
Remove the end of the assembly.
Grasp the burners, and turn to rotate the burner to a position where the "bumps" on the burner match up with the gaps in the burner cook base. Remove the burners.
The old burner base can be set to the side. At this time i cleaned the burners throughly with a small toothbrush size wire brush.
Assemble the burners to the new top base by aligning the bumps to the opening in the cook top base, turn slightly to keep burner in place. Insert the gas tubes, with the washers (be careful about the washer lip orientation) with the smaller screws, do not overtighten!
Attach the igniter connector to the igniters.
Align the burner/gas tubes with the assembly end. Carefully set the base into place, adjust the tubes as necessary to get the screws aligned with the holes. Install the screws, tighten hand tight.
Install entire assembly into cook top, check igniter and burner operation.
Glass cleaner is great for cleaning the new porcelain surface. Read more...
PartSelect Number PS11738714
Manufacturer Part Number WP2001F175-09
This sealed-burner gas range cooktop provides a smooth, durable cooking surface designed to contain spills and support grates and burner caps for optimal performance. Its sealed design helps protect internal components while maintaining proper flame patterns for efficient cooking. Ideal for replacing cracked, chipped, or warped tops, this component restores both the appearance and functionality of your range. Installation typically involves removing the old cooktop and securing the new one in place, and professional assistance is recommended for proper fit and safety.
Installation Instructions
David from MECHANICSVLLE, MD
Replaced old Jenn Air cook top base
Prepare a flat area with newspaper, a screwdriver, and a small bowl for the screws, and a small wire brush (if you want to clean as you go). I also recommend taking photos as you proceed, for reference.ALSO, take close note of the orientation of the cook top base, one end has a lip that's allows for burner assembly removal.
Remove entire two burner assembly, place upside down on newspaper, remove seven Phillips screws, remove assembly bottom.
Remove small screws from gas tubes, pay close attention as you remove the gas tube from the bottom of the burner, to the orientation of the two washers (the washers have an edge).
Remove the burner tubes and washers.
Carefully remove the igniter connectors from igniter.
Remove the end of the assembly.
Grasp the burners, and turn to rotate the burner to a position where the "bumps" on the burner match up with the gaps in the burner cook base. Remove the burners.
The old burner base can be set to the side. At this time i cleaned the burners throughly with a small toothbrush size wire brush.
Assemble the burners to the new top base by aligning the bumps to the opening in the cook top base, turn slightly to keep burner in place. Insert the gas tubes, with the washers (be careful about the washer lip orientation) with the smaller screws, do not overtighten!
Attach the igniter connector to the igniters.
Align the burner/gas tubes with the assembly end. Carefully set the base into place, adjust the tubes as necessary to get the screws aligned with the holes. Install the screws, tighten hand tight.
Install entire assembly into cook top, check igniter and burner operation.
Glass cleaner is great for cleaning the new porcelain surface. Read more...
Your Price
$376.36
Special Order
Your Price
$76.01
In Stock
Jenn-Air Cooktop Cartridge Top - Stainless Steel
PartSelect Number PS11738729
Manufacturer Part Number WP2002F208-50
This is just the top portion of the cartridge. All other parts sold separately.
Installation Instructions
Judy from Florence, AL
i needed a new top for my jenair
i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover.
Read more...
Your Price
$703.56
In Stock
Your Price
$518.25
In Stock
Jenn-Air Cooktop
PartSelect Number PS16226912
Manufacturer Part Number W11476214
This original Glass Knob Assembly for Cooktops is a high quality product by Whirlpool, promising longevity and durability. Designed to fit perfectly with select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef, the assembly kit effectively enhances the look and functionality of your 36" cooktop. Coated in a sleek, black finish, it adds a touch of sophistication to your appliance. Ensure to verify its compatibility with your particular model before ordering, as size and shape may have slight variations. This genuine Whirlpool assembly part is a direct fit component, ensuring seamless installation and top performance. Enhance your cooktop operation today with this stylish and durable glass knob assembly.
Related Jenn-Air Cooktop Parts
- All Jenn-Air Cooktop parts
- Jenn-Air Cooktop Brackets and Flanges
- Jenn-Air Cooktop Caps and Lids
- Jenn-Air Cooktop Circuit Boards and Touch Pads
- Jenn-Air Cooktop Drip Bowls
- Jenn-Air Cooktop Elements and Burners
- Jenn-Air Cooktop Fuses
- Jenn-Air Cooktop Grates
- Jenn-Air Cooktop Hardware
- Jenn-Air Cooktop Igniters
- Jenn-Air Cooktop Ignitions
- Jenn-Air Cooktop Knobs
- Jenn-Air Cooktop Lights and Bulbs
- Jenn-Air Cooktop Seals and Gaskets
- Jenn-Air Cooktop Switches
- Jenn-Air Cooktop Trims
- Jenn-Air Cooktop Valves
- Jenn-Air Cooktop Wire Plugs and Connectors