Dishwasher Dishracks | Replacement Parts & Accessories | PartSelect

Popular Dishwasher Dishracks

Your Price
$38.07
Dishwasher Dish Rack Adjuster Kit - Left and Right Side
PartSelect Number PS10064063
Manufacturer Part Number W10712394
The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.This is a genuine OEM part.
Fixes these symptoms
Door latch failure
Door won’t close
Leaking

See more...
Installation Instructions
Paul from Encinitas, CA says,

Replace rack adjusters - wheel were broken
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides toge...read more

Your Price
$23.01
Dishwasher Upper Rack Adjuster
PartSelect Number PS11756150
Manufacturer Part Number WPW10546503
This adjuster connects to the side of the top dish rack. It is used to change the height of the upper rack.
Fixes these symptoms
Door latch failure
Door won’t close


Installation Instructions
Kathie from Breda, IA says,

Broken parts on rack
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most...read more

Your Price
$63.37
Dishwasher Lower Dish Rack Assembly
PartSelect Number PS8760885
Manufacturer Part Number 808602302
This part is a genuine OEM part. This white lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dish washing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Lauren from Monmouth, IL says,

Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old...read more

Your Price
$5.63
Rack Stop Clip
PartSelect Number PS11750071
Manufacturer Part Number WPW10195622
This rack stop clip goes on the end of the rail to stop the upper dish rack from falling out. This clip can be used for the left or right side, and is sold individually. It is a good idea to replace both sides at once. To replace the clip, you will need a screwdriver to remove the old one and screw the new one in place.
Fixes these symptoms
Door latch failure
Door won’t close


Installation Instructions
STEVEN from FAIRFAX, VA says,

Replaced top rack slider bar
Per the you tube video...read more

Your Price
$39.17
Dishwasher Rack Adjuster Kit - White Wheels
PartSelect Number PS10065979
Manufacturer Part Number W10712395
This is a kit that includes all parts required to make up 2 rack adjusters (right and left) and 2 adjuster actuators (right and left). Parts would need to be assembled.
Fixes these symptoms
Door latch failure
Door won’t close
Not cleaning dishes properly

See more...
Installation Instructions
Richard from OAKLAND, CA says,

Instruction from Whirlpool Not Good (No problem with Part Select)
Trial and error. The instructions from Whirlpool included with the part had minuscule pictures so it was hard to follow. The written instructions were good. But "a picture is worth a thousand words...read more

Your Price
$4.74
Rack Track Stop
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually, and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy. You will not require any tools to complete the job.
Fixes these symptoms
Door latch failure
Door won’t close
Not cleaning dishes properly

See more...
Installation Instructions
Dennis from Worthington, OH says,

Needed to replace orginal rack track stop
The OEM part sells for $28. PartSelect also offers an alternative for $4.95. Both OEM and alternative versions are made of pressed plastic with no moving parts. They both do the same job. The cheaper ...read more

Your Price
$1.24
RACK SLIDE END CAP
PartSelect Number PS2370502
Manufacturer Part Number WD12X10304
The rack slide end cap is the part that attaches to the rails of your upper dish rack and prevents the dishrack from sliding too far out. If you find the dish rack is causing the door to not close properly, it may be due to the part being worn out or damaged. All you need to complete this repair is a small flat blade screw driver. Simply pop out the cap and snap the new one into place. If the rear cap needs to be replaced you will need to remove both front caps and slide the rack completely off for full access.
Fixes these symptoms
Door latch failure
Door won’t close
Not cleaning dishes properly

See more...
Installation Instructions
Joseph from Haymarket, VA says,

Worn/broken plastic parts were causing misery
Order arrived two days after being placed. Super easy to remove the old, worn, broken plastic parts and replace with new. Everything popped right on just as shown in the diagram. Our happiness wi...read more

Your Price
$54.21
Dishwasher Upper Dish rack with Wheels
PartSelect Number PS10062929
Manufacturer Part Number 5304498211
The upper dishrack is used to hold your dishes in place while the dishwasher goes through the wash cycles. Over time the dishrack can become damaged, start to rust, or be missing rollers, and the dishrack will need to be replaced. This rack is white in color with light gray rollers and measures approximately 23 Inch x 23 Inch. This is a genuine OEM part.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Lauren from Monmouth, IL says,

Rusty racks
It was amazing, the items were shipped within days of placing the order. They arrived ready for installation. My husband had the new racks in place in 10 minutes. He removed the wheels from the old...read more

Your Price
$6.24
Tine Pivot
PartSelect Number PS11748190
Manufacturer Part Number WPW10082853
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. The clip is used to keep the tine row in place in the dishrack. If your clip is cracked or damaged, it is best to replace this part. To repair, first lift the release tab and hold the other side to prevent it from falling off. After lifting it off, you can set the new clip on the tine row and lock it up. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to wear work gloves as a safety precaution.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Kathie from Breda, IA says,

Broken parts on rack
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most...read more

Your Price
$21.73
Dishwasher Adjustable Rack Tine
PartSelect Number PS9864769
Manufacturer Part Number 154721404
Sold individually. This fold down tine is supplied directly from the original equipment manufacturer. Made for dishwashers, the metal and plastic tine is fitted in the dishrack. This feature provides support to the dishes on the rack, and is sold individually. No tools should be necessary for the replacement.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Michael from Katy, TX says,

Fence in dishwasher rack rusted
Unsnapped three clips in lower rack securing old fence in rack. Attached clips to new fence and snapped assembly back into rack....read more