Jenn-Air Dishwasher Dishracks | Replacement Parts & Accessories | PartSelect

Popular Jenn-Air Dishwasher Dishracks

Your Price
$38.07
Rack Adjuster Kit - Left and Right Side
PartSelect Number PS10064063
Manufacturer Part Number W10712394
The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.
Fixes these symptoms
Door latch failure
Door won’t close
Leaking

See more...
Installation Instructions
Paul from Encinitas, CA says,

Replace rack adjusters - wheel were broken
Replacement was pretty easy after figuring out how to unsnap/unlock the old pieces. Tools only used to do a little prying and poking, but really aren't needed. Everything either snaps or slides toge...read more

Your Price
$23.01
Rack Adjuster
PartSelect Number PS11756150
Manufacturer Part Number WPW10546503
This adjuster connects to the side of the top dishrack. It is used to change the height of the upper rack.
Fixes these symptoms
Door latch failure
Door won’t close


Installation Instructions
Kathie from Breda, IA says,

Broken parts on rack
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most...read more

Your Price
$5.63
Rack Stop Clip
PartSelect Number PS11750071
Manufacturer Part Number WPW10195622
This rack stop clip goes on the end of the rail to stop the upper dish rack from falling out. This clip can be used for the left or right side, and is sold individually. It is a good idea to replace both sides at once. To replace the clip, you will need a screwdriver to remove the old one and screw the new one in place.
Fixes these symptoms
Door latch failure
Door won’t close


Installation Instructions
STEVEN from FAIRFAX, VA says,

Replaced top rack slider bar
Per the you tube video...read more

Your Price
$4.74
Rack Track Stop
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually, and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy. You will not require any tools to complete the job.
Fixes these symptoms
Door latch failure
Door won’t close
Not cleaning dishes properly

See more...
Installation Instructions
Dennis from Worthington, OH says,

Needed to replace orginal rack track stop
The OEM part sells for $28. PartSelect also offers an alternative for $4.95. Both OEM and alternative versions are made of pressed plastic with no moving parts. They both do the same job. The cheaper ...read more

Your Price
$6.24
Tine Pivot
PartSelect Number PS11748190
Manufacturer Part Number WPW10082853
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. The clip is used to keep the tine row in place in the dishrack. If your clip is cracked or damaged, it is best to replace this part. To repair, first lift the release tab and hold the other side to prevent it from falling off. After lifting it off, you can set the new clip on the tine row and lock it up. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to wear work gloves as a safety precaution.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Kathie from Breda, IA says,

Broken parts on rack
Easy...easy....I first watched YouTube videos on how to fix our problem. We replaced both tracks and also the rack adjuster on both sides of the rack. The entire repair took about an hour and most...read more

Your Price
$27.31
Drawer Track
PartSelect Number PS11750072
Manufacturer Part Number WPW10195623
This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack will not slide out, or your old drawer track is warped and causes the dish rack wheels to fall off or jam. You will need a flat blade screwdriver to remove the rear stop, so you can pull out the drawer track.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
STEVEN from FAIRFAX, VA says,

Replaced top rack slider bar
Per the you tube video...read more

Your Price
$29.99
Positioner
PartSelect Number PS11750093
Manufacturer Part Number WPW10195840
Also known as rack adjuster. Sold individually.
Fixes these symptoms
Door won’t close


Installation Instructions
Robert from LAFAYETTE, CA says,

Top dish rack falling down because wheel restraints broken
The online video we found was really helpful....read more

Your Price
$22.76
Adjuster Clip
PartSelect Number PS11750092
Manufacturer Part Number WPW10195839
Sold individually.
Fixes these symptoms
Door latch failure
Door won’t close


Your Price
$212.69
Lower Dishrack with Wheels
PartSelect Number PS1960964
Manufacturer Part Number W10139223
NOTE: Per factory, this substituted part only has 6 wheels instead of 8 and NO longer comes with shelf rack.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Joy from Washington, VT says,

Pieces of the lower dishrack were loosing the plastic coating and snapping off.
First of all, I removed the existing lower dishrack. That was a piece of cake! The part that was tricky was getting the spray arm out of the center so that it could be placed into the new dishrack. ...read more

Your Price
$6.32
Adjuster Housing Cover
PartSelect Number PS11751101
Manufacturer Part Number WPW10250162
The adjuster cover goes on the outside of the adjuster housing. It is used to support the height adjuster and also protects the internal components od the adjuster housing.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
paul from PEABODY, MA says,

Parts became dry and brittle and broke
By eye...read more