Amana Dishwasher Dishracks | Replacement Parts & Accessories | PartSelect

Popular Amana Dishwasher Dishracks

Your Price
$6.62
Rack Track Stop
PartSelect Number PS11746591
Manufacturer Part Number WP8565925
The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack stop may need to be replaced. The replacement part may differ slightly from the broken part, depending on the model. However, the different styles are interchangeable. This product is sold individually, and comes in both a white and grey plastic version. Many of our customers found this repair to be very easy. You will not require any tools to complete the job.
Fixes these symptoms
Door latch failure
Door won’t close
Not cleaning dishes properly

See more...
Installation Instructions
Dennis from Worthington, OH says,

Needed to replace orginal rack track stop
The OEM part sells for $28. PartSelect also offers an alternative for $4.95. Both OEM and alternative versions are made of pressed plastic with no moving parts. They both do the same job. The cheaper ...read more

Your Price
$6.62
Rail Stop Clip
PartSelect Number PS11748191
Manufacturer Part Number WPW10082861
This part goes at the end of the rail to stop the dishrack from falling out.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Greg from LEAGUE CITY, TX says,

Broken lower rack wheels, tine pivot, and rail stop clip
Easy, 5 minute repair. Snap off old, snap on new. I looked up on the manufacturer's website and got the replacement part numbers, then ordered on partselect for half the price....read more

Your Price
$6.01
Front Track Stop
PartSelect Number PS11755805
Manufacturer Part Number WPW10508950
This stopper is attached to the front of the top dishrack track. This stop keeps the upper rack from pulling out too far and falling from the track.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Dan from WESTFIELD, IN says,

The stopper of the top of the rack came off of dishwasher 90 days from our purchase. I installed the new part and it fell off on second running.
There were no instructions. We’ve pulled the the top rack out of dishwasher several times now, very irritating. Why should I be spending money on ay part 90 days after a purchase. Very disappointed WH...read more

Your Price
$199.10
Lower Dishrack with Wheels
PartSelect Number PS1960964
Manufacturer Part Number W10139223
NOTE: Per factory, this substituted part only has 6 wheels instead of 8 and NO longer comes with shelf rack.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Joy from Washington, VT says,

Pieces of the lower dishrack were loosing the plastic coating and snapping off.
First of all, I removed the existing lower dishrack. That was a piece of cake! The part that was tricky was getting the spray arm out of the center so that it could be placed into the new dishrack. ...read more

Your Price
$5.93
Dishrack Guide Rail Stop - gray
PartSelect Number PS11747648
Manufacturer Part Number WP99002135
This is a rail stop for your dishwasher. No tools are required for this repair. it simply pops on and off the end of your slide rail when pressing the locking tab. This part is sold individually, so it is recommended to check the opposite rail stop on your dishwasher in case it needs to be replaced as well. The rail stop is located at the end of the upper slide rails which hold the upper dishrack in place. The rail stop prevents the upper rack from sliding completely off the slide rails. This part is gray in color and approximately 1.5 inches wide.
Fixes these symptoms
Door latch failure


Installation Instructions
Richard from San Jose, CA says,

broken upper rack roller
snapped on new roller and job done...read more

Your Price
$5.93
Adjustable Peg Clip
PartSelect Number PS11757601
Manufacturer Part Number WPY912709
This dishrack clip is intended for use with dishwasher dishracks that have adjustable pegs. This clip is only about four inches long.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
frank from kenmore, WA says,

The dish rack had two sets of adjustable tines that had never worked.
I ordered two clips just in case. Turns out I needed both of them. Since I hadn't seen the adjustable tines installed, it took some time to figure out how to put the assembly together.

Fo...read more

Your Price
$61.88
Silverware Basket
PartSelect Number PS11728031
Manufacturer Part Number W10840140
This silverware basket sits in the lower dishrack and holds small utensils like forks, knives, and spoons during the dishwashing cycle. The basket is made of high quality grey plastic and measures approximately 19 inches (length) x 8 inches (height) x 4 inches (deep).
Fixes these symptoms
No Symptoms for this part
Your Price
$192.45
Upper Dishrack with Wheels
PartSelect Number PS2099053
Manufacturer Part Number 99001454
This rack comes complete with four attached wheels and the rack may differ in appearance, but will function same as original part.
Fixes these symptoms
Not cleaning dishes properly


Installation Instructions
Sharon from Kewadin, MI says,

Dishwasher racks were all rusted and the coating was wore off.
Just took the racks out installed the new ones in no tool required.

I will go through partselect.com again. Had a very good esperience with them....read more

Your Price
$5.11
Convertible Tine Pivot Clip
PartSelect Number PS11747738
Manufacturer Part Number WP99003003
This part is a replacement convertible tine pivot clip, or tine row pivot, for your dishwasher. It is made of plastic and is approximately 3 ½ inches long and ½ an inch wide. The tine pivot clip is for dishracks that have convertible tine rows. These rows can fold up and down, depending on what you want to load into the rack. The tine pivot clip locks it into place, so if the clip is damaged, the tine row will not remain where you want to set it. To replace the clip, simply snap the old clip out of place and remove it, then attach the new clip to the dishrack in the desired position. This part is sold individually and is an OEM part.
Fixes these symptoms
No Symptoms for this part
Your Price
$21.50
Silverware Basket
PartSelect Number PS11747611
Manufacturer Part Number WP99001576
This silverware basket has eight sections and is all white in color. It is also made of plastic and has a built-in handle on either side so that you can quickly and easily remove it from the dishwasher. The basket is used to hold utensils in the dishwasher and secure them in place while the dishwasher is running. This part may bend, warp, or break over time and will need to be replaced. This is a very easy replacement and requires no tools. Remove the old rack and remove the cover so you can re-use it on the new basket. You simply place the new one on the bottom rack.
Fixes these symptoms
Leaking
Not cleaning dishes properly


Installation Instructions
Thomas from Centennial, CO says,

Old shelf rack and silverware basket (yellowed & stained)
Removed the old dishrack shelf by taking off the end caps. A screw driver was used to release the plastic end caps. The old dishrack shelf is now able to just roll out and the new shelf is rolled in...read more