Whirlpool Cooktop Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Cooktop Valves
Your Price
$65.27
In Stock
Whirlpool Cooktop Head, Burner (right Rear, Left Front)
PartSelect Number PS11745753
Manufacturer Part Number WP8286814
Enhance your cooking experience with this genuine Whirlpool BURNR-HEAD. This medium surface burner base is designed to provide an even flame across your cooking area for optimal heat distribution. It's compatible with a variety of Whirlpool models, as well as some KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef ranges. Ensure to disconnect the gas supply and unplug your range before installing this burner head. It's advised to wear work gloves during installation to safeguard your hands. Infuse proficiency into your kitchen appliances with this Whirlpool burner head.
Your Price
$65.27
In Stock
Whirlpool Cooktop Head, Burner (left Front & Right Front¢er)
PartSelect Number PS11745754
Manufacturer Part Number WP8286815
Experience the efficiency and convenience provided by the Whirlpool surface burner head. Specially designed for functionality and precision, this genuine OEM part provides an even distribution of gas through holes or slots, ensuring a uniform flame spread across the cooking area. This large burner head is ideally placed at the left front, right front and center positions of your Whirlpool range. Prior to installing, remember to shut off the gas supply and unplug the range for safety, and do wear work gloves to keep your hands protected. Designed with meticulous attention to detail, this burner head accentuates the excellence of Whirlpool products. Please ensure the part number suits your model before purchase, as there may be slight variations in size and shape.
Your Price
$65.27
In Stock
Whirlpool Cooktop Head, Burner (left Rear)
PartSelect Number PS11745752
Manufacturer Part Number WP8286813
Introducing the Whirlpool Surface Burner Head, a genuine OEM part compatible with several models of Whirlpool stoves, ovens, and ranges. Its task is to effectively distribute gas through holes or slots, thus generating an even flame for consistent cooking results. Notably, it also fits a variety of other models, including those made by KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. As part of the installation process, make sure to shut off the gas supply and unplug the range for safety purposes. We advise wearing work gloves to protect your hands during setup. Please ensure correct part number match with your model before purchasing.
Your Price
$50.22
In Stock
Whirlpool Cooktop Burner Head - 16k
PartSelect Number PS11754347
Manufacturer Part Number WPW10406878
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Your Price
$55.93
In Stock
Whirlpool Cooktop Range Small Burner Cap
Haviong directions would have been very helpful. Read more...
PartSelect Number PS11740923
Manufacturer Part Number WP3191898
Sold individually.
Installation Instructions
Joseph from Matawan, NJ
needed to replace the main top of stove
First I removes all visible screws. The stove top would not budge. I noticed that the elements had screws holding the top in place. These were difficult to remove and all eight screw broke. I then removed the top. I had to remove the broken screws by drilling them out and re-tapping the threads. This was the single most difficult thing to do and took the most time. Once this was complete, re-installing the top was quite simple. Haviong directions would have been very helpful. Read more...
Your Price
$130.06
In Stock
Whirlpool Cooktop Range Gas Valve
PartSelect Number PS11757482
Manufacturer Part Number WPY04100188
Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
Dana from WAUKEE, IA
valve for turning on gas is immovable
1. Turn off power to the cooktop and turn off the gas. This is extremely critical. 2. Remove the knobs and then the covering. Beneath will be the valve part you need to change. 3. Find a way to mark where all the wires go into the piece that sits over the valve (mine was white with a blue ring in the center). You will see four wires going into it. You can photograph it, or you can use tape and a sharpie to write where everything goes on the parts themselves. It is likely that they will become disengaged at some point during your repair, so the step is crucial. 4. Lift off the piece on top of the valve (the valve goes through the blue hole in the center of the white piece). Don't be afraid to give it a tug, as it can be slightly stuck. 5. Find a way to get underneath the large circular plate (mine was gold colored) beneath the valve in order to remove any screws that are holding the valve in place unseen below the surface. 5. Now back above the surface: disconnect the gas valve attached to the valve. 6. Switch out the valve to the new one and reverse these steps to install it. ****7. If you are unable to get beneath the plate where the valve is attached on the underside, no worries. Take the new valve and carefully unscrew the top two screws (need a special tool from a hardware store) and similarly take off the screws on top of the broken valve. Be very careful to remove the top of the old valve slowly enough to see exactly how the inside pieces have to be put together. Essentially, you will find a spring and a small ring with three notches. The small part of the spring goes on the bottom, the larger part of the spring faces upward, and on top of that goes the ring with the three notches aligned in a certain way that's very important so that when you put it back together not only will the valve depress properly but you will be able to change the fire from low to medium to high. Make sure you can depress the valve a little bit, if not you have to readjust the ring until it's in the proper position. 8. Turn on gas and power to be sure it works. 9. Close unit. ***Note: if any of your parts accidentally dropinto the opening, use a magnetized srcrewdriver to retrieve them.
Read more...
Your Price
$52.32
In Stock
Whirlpool Cooktop Range Burner Head 12k
PartSelect Number PS11754345
Manufacturer Part Number WPW10406797
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Your Price
$36.85
In Stock
Whirlpool Cooktop Range Natural Gas To Liquid Propane Conversion Kit
PartSelect Number PS11740944
Manufacturer Part Number WP3192741
This kit allows you to convert your appliance from natural gas to liquid propane.
Your Price
$63.17
In Stock
Whirlpool Cooktop Burner Head - 9.2k Right Rear & Center
PartSelect Number PS11754342
Manufacturer Part Number WPW10406283
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Your Price
$42.83
In Stock
Whirlpool Cooktop Natural Gas To Liquid Propane Conversion Kit
PartSelect Number PS1570293
Manufacturer Part Number 12001809
To convert back to Natural Gas - you must save old orifices. If you no longer have the old orifices, the burner tubes must be ordered that contain the natural gas orifices.
Installation Instructions
Paul from Elk Grove, CA
Related Whirlpool Cooktop Parts
- All Whirlpool Cooktop parts
- Whirlpool Cooktop Brackets and Flanges
- Whirlpool Cooktop Caps and Lids
- Whirlpool Cooktop Cooktops
- Whirlpool Cooktop Drip Bowls
- Whirlpool Cooktop Elements and Burners
- Whirlpool Cooktop Fuses
- Whirlpool Cooktop Grates
- Whirlpool Cooktop Hardware
- Whirlpool Cooktop Igniters
- Whirlpool Cooktop Ignitions
- Whirlpool Cooktop Knobs
- Whirlpool Cooktop Lights and Bulbs
- Whirlpool Cooktop Seals and Gaskets
- Whirlpool Cooktop Switches
- Whirlpool Cooktop Trims
- Whirlpool Cooktop Wire Plugs and Connectors