Whirlpool Cooktop Wire Plugs and Connectors

Popular Whirlpool Cooktop Wire Plugs and Connectors

Your Price
$13.41
  In Stock
Whirlpool Cooktop Surface Burner Plug-In Block Kit
★★★★★
★★★★★
18 Reviews
PartSelect Number PS340571
Manufacturer Part Number 330031
The surface burner plug-in block kit features a newer-style terminal block. This kit is designed for use with ranges and cooktops. This terminal block is how the coil element on your stove connects to the inner wiring of your appliance. Without this connection your burner element would not get the electrical current it needs to heat up. When your element will not heat at all, or if it is not heating properly it is likely an issue with the terminal block. You need to remove the element to replace this part. While you have the element out, inspect the element and the terminal for any corrosion, arcing, or discoloration. If you notice any damage to the element or the terminals we recommend you replace this part as well. This kit includes two metal brackets, two pre-crimped high-temperature wire leads, two ceramic wire nuts, two heat-shrinking insulators, and a mounting screw. Before you begin this repair, make sure you have unplugged your appliance.
Fixes these symptoms
Installation Instructions
Jon from Oakley, CA
Surface elements quit working
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new.
I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.

Way to go Part Select.com

Jon
Read more...
Your Price
$13.90
  In Stock
Whirlpool Cooktop Surface Burner Receptacle Kit
★★★★★
★★★★★
20 Reviews
PartSelect Number PS1570190
Manufacturer Part Number 12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your appliance from the power supply and wear work gloves to protect your hands. The surface burner receptacle kit comes with a plastic block, high temperature wire nuts, a metal bracket, and wires. This part functions as the connection between the wire harness and the surface element in your range.
Fixes these symptoms
Installation Instructions
Richard from Carthage, NC
Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the new wires with the ceramic wire nuts provided and secured the receptacle back in place with the new screw provided in the kit.
My sister's husband wanted to scrap the whole range but I repaired it with $14.00 worth of parts.
The element is working great now.
Whenever I need appliance parts again I'll use partselect.com.
Read more...
Your Price
$34.05
  In Stock
Whirlpool Cooktop Terminal Block
★★★★★
★★★★★
17 Reviews
PartSelect Number PS11750972
Manufacturer Part Number WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness. Some symptoms replacing the terminal block could be a solution for are little to no heat when baking, element will not heat and/or it will not start. This part will prevent loosening and will reduce damage caused by corrosion (by two different metals). Refer to the instructional diagram for further replacement guidance and exact placement. You must unplug the appliance before installing this part and wear gloves to protect your hands.
Fixes these symptoms
  • Element will not heat
  • Little to no heat when baking
  • Touchpad does not respond
  • See more...
Installation Instructions
Joseph from Decatur, GA
Burned terminal block and filter board
Removed and replaced above named parts, rewired.Be sure to tighten all nuts that secure wires. I believe this is what caused the problem. Read more...
Your Price
$38.07
  In Stock
Whirlpool Cooktop Receptacle Kit
★★★★★
★★★★★
11 Reviews
PartSelect Number PS389217
Manufacturer Part Number 814399
This assembly of parts is a surface burner receptacle kit, and is used in conjunction with your range. The assembly comes with two wires, two wire nuts, two pieces of heat-shrink tubing, and the receptacle. If your element is not heating, you may need to replace your surface burner receptacle. The function of this part is to connect the surface element to the wire harness. The tools you will need for this installment include a number two square-head screwdriver or a number two Phillips screwdriver, a pair of wire strippers and crimpers, and a heat gun.
Fixes these symptoms
Installation Instructions
Tim from Pittsford, NY
Stove would not heat up
Cut old wires to receptacle, striped the wires, wire nutted to new receptacle, screwed new receptacle into stove and installed heating element.

Piece of cake, but then again my degree is in electrical engineering so I should be able to handle a couple of wire nuts.
Read more...
Your Price
$47.65
  In Stock
Whirlpool Cooktop Cartridge Receptacle
PartSelect Number PS11757565
Manufacturer Part Number WPY702434
This cartridge receptacle is almost four inches long. It is white in color and is made of ceramic.
Fixes these symptoms
Installation Instructions
Stephen from Andover, MA
Infinite switch ran more than one burner
Purchased 1 infinite switch and installed it on the left front burner. problem still there so I used the switch that I replaced on the rear burner and all was ok. The front switch had been sending full heat to the rear burner,but the problem ended up with the rear switch. The switches are interconnected and all are the same part number.Diagrams on partsselect were the key to a successful repair.To access the switch you need only to remove the fan cover, remove the 2 screws holding the switch assembly and move it foreward and then lift to reveal slide on connectors. Power to the unit is off at the main panel during the entire process. Read more...
Your Price
$61.28
  In Stock
Whirlpool Cooktop Burner Cartridge Terminal Block
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11757594
Manufacturer Part Number WPY708730
No spades or wiring come with this part. To order the spades or wiring, please research by model# of appliance.
Fixes these symptoms
Installation Instructions
Calvin from Merced, CA
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. Read more...
Your Price
$24.57
  In Stock
Whirlpool Cooktop Main Power Terminal Block
PartSelect Number PS11745232
Manufacturer Part Number WP8203546
Sold individually.
Fixes these symptoms
Installation Instructions
Frank from Silverhill, AL
lighting strike
replaced the suppressor and terminal block oven works Read more...
Your Price
$7.60
  In Stock
Whirlpool Cooktop Mounting Clip
PartSelect Number PS11742373
Manufacturer Part Number WP4332752
This mounting clip is for the surface burner receptacle of your electric range. Sold individually.
Fixes these symptoms
Installation Instructions
ROBERT from ARVADA, CO
Intermittant Operation Of Surface Burner
I first tripped the power circuit breaker. Then I unplugged and removed the old element. Removing one screw allowed me to remove and replace the mounting clip. This did result in breaking off a small piece of plastic-like material from the electrical housing to which the clip was attached but did not hinder the replacement of the new clip. I inserted the new burner element. The surface burner is now working fine. Read more...
Your Price
$71.24
  In Stock
Whirlpool Cooktop Element Receptacle Assembly
PartSelect Number PS11744184
Manufacturer Part Number WP74007474
This part connects the surface burner to the wiring harness.
Fixes these symptoms
Installation Instructions
Daniel from Great Falls, VA
Range element receptacle had shorted out
(1) Disassembled range element cartridge unit by removing six machine screws on sides
(2) Removed old element receptacle assembly (note screww attaching the clip to ring was corroded and had to be drilled out and replaced - screw not included), retaining existing element (determined it was good)
(3) Fited up new element receptacle assembly and determined how far the new wires would go, cut the old wires at appropriate point (allowing for wire splice).
(4) Attached new element receptacle assembly using a machine screw I found in my collection
(5) Routed new wires though retaining clips, and spliced into old wires near the cartridge plug (note: be sure to use high temp splice nuts - not supplied in kit)
(6) Installed old element into new receptacle and tested by measuring resistance - element resistance should be about 12 ohms, with all connections to ground reading infinity)
(7) Reassembled cartrige assembly using six machine screws previously removed (note, make sure the part align properly - top inside the bottom)
(8) Put the assembly back on range - worked great!
Read more...
Your Price
$13.94
  In Stock
Whirlpool Cooktop Cartridge Male Contact Spade
★★★★★
★★★★★
1 Review
PartSelect Number PS1988157
Manufacturer Part Number Y708572
This cartridge assembly male contact spade is made of metal. These are sold individually, though each range uses four contact spades.
Fixes these symptoms
Installation Instructions
Calvin from Merced, CA
The top would not heat,large or small eye.
Removed the bottom cover and replaced the burned contact spade. Cleaned the wires and adjust the contact holder. Read more...

Related Whirlpool Cooktop Parts