Whirlpool Cooktop Igniters

Whirlpool Appliance Parts
Shop By Part Type

Popular Whirlpool Cooktop Igniters

Your Price
$66.83
  In Stock
Spark Module - Surface Burners
★★★★★
★★★★★
(8)
PartSelect Number PS2003170
Manufacturer Part Number 12001596
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
scott from centreville, VA
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Read more...
Your Price
$28.48
  On Order
Top Burner Spark Ignition Electrode with Retaining Clip
★★★★★
★★★★★
(2)
PartSelect Number PS11740866
Manufacturer Part Number WP3185804
This part helps your burner ignite and produce flame.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Billy from Martinsville, IN
There was a crack in the porcelain not letting it spark
I used a screwdriver to pry the electrode assy. out of the burner. then disconnected the wire.
Then just connected the new electrode and place the assy, in the burner.
Read more...
Your Price
$26.02
  On Order
Surface Ignitor
★★★★★
★★★★★
(1)
PartSelect Number PS11747432
Manufacturer Part Number WP9782116
Also known as Spark Electrode. This part helps your burner ignite and produce flame.
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Roland from Houston, TX
Igniter problem on one gas burner
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to install the replacement, very quick fix.

I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.
Read more...
Your Price
$25.83
  In Stock
Surface Igniter
PartSelect Number PS11727815
Manufacturer Part Number W10833887
Your Price
$35.35
  In Stock
Surface Ignitor
PartSelect Number PS11745157
Manufacturer Part Number WP8190892
Sold individually.
Your Price
$112.03
  On Order
Top Burner Spark Igniter
PartSelect Number PS11743872
Manufacturer Part Number WP71002179
This spark igniter electrode has a 35" wire lead.
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Steve from Sedona, AZ
Igniter not sparking and display panel dim
i'm writing this several days after installling parts and from memory so forgive me if i miss a step or get the # of screws wrong.

Clock assembly replacement was very easy. Open oven door and remove screws just below the display panel, remove burner knobs and remove the 2 screws hidden by the knobs, remove the 2 screws holding the side triangular pieces (1 screw for each side). you may need to pull range out and away from the counter to remove the triangle pieces. remove the display panel, flip it over and remove 2 screws holding clock assembly. gentle remove the ribbon cables from the old assembly and then perform everything in reverse to reassemble.

Replacing the igniters was more difficult and took up the bulk of the time. Warning: find some way to test the spark module first. I replaced both igniters (1 wire was broken so it needed replacement for sure, but the other igniter may have been good...) and they still do not work. I'm waiting on delivery of a spark module.

remove all burner stuff (grill, burner assembly, etc.), then remove the top of the stove, there are 2 screws on each side and several in the back, there are also screws around the inside rim of the burner pans. also remove the panel on the back of the stove, this allows access to the spark module. gently lift the burner pans, reach underneath the pan and unscrew the nut holding the igniter in place. fortunately mine were easy to unscrew and i could do it with my fingers, getting a wrench underneath would have been a challenge. unhook the igniter wire from the spark module and remove the old igniter. install new igniter in reverse and reassemble.
Read more...
Your Price
$30.94
  On Order
Surface Ignitor
PartSelect Number PS11756462
Manufacturer Part Number WPW10571489
Your Price
$48.03
  On Order
Surface Igniter
PartSelect Number PS353641
Manufacturer Part Number 4157608
Your Price
$92.13
  In Stock
Top Burner with Spark Electrode
PartSelect Number PS389259
Manufacturer Part Number 814513
This part distributes flame evenly to your cookware and the electrode helps your burner ignite and produce flame.

Related Parts