Thermador Parts

Thermador Appliance Parts
Shop By Appliance Type

Popular Thermador Parts

Your Price
$10.85
   In Stock
Dishrack Roller - Grey
★★★★★
★★★★★
23 Reviews
PartSelect Number PS8727387
Manufacturer Part Number 00611475
This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lower dishrack of your dishwasher. On one side of the roller is a clip that allows it to be attached to the dishrack. The dishrack roller allows you to slide the dishrack in and out of the dishwasher efficiently. If one of the rollers is broken or missing, it can cause the dishrack to become difficult to slide in and out. To replace the roller, simply snap it off the dishrack, and snap the new one into place. This is a genuine OEM part.
Installation Instructions
Dennis from PLEASANTVILLE, NJ
rollers broke
pushed with thumb pressure and snapped rollers into place.....EASY Read more...
Your Price
$71.44
   In Stock
Water Filter
★★★★★
★★★★★
47 Reviews
PartSelect Number PS11722132
Manufacturer Part Number EDR5RXD1
This ice and water filter fits all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill, below the refrigerator door. This part will also fit any Kenmore models starting with 106. This filter is NSF certified, and is meant to filter for taste and odor, sediment, chlorine, and lead. The filtering provides overall better tasting and higher quality water. For best results, it is recommended to change your ice and water filter every six months or 200 gallons of filtered water. After changing the filter, flush the system to prepare the new filter for use. There are no tools required for this repair.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Jeff from Midway, GA
Front wheel was broken when moving refrigerator
Lifted the front up onto a scrap 2x4 to get it off the ground and it had 1 bolt that you removed to get the old item off and replace with new assymbly and 1 bolt to re attach. This sat broke for over a year becuase I thought it would be alot harder to fix, found the part on parts select ordered it recieved it in approx 2 days and had it fixed in less than 15 minutes. I would recommend parts select to anyone who told me that they had a appliance broken.
Thanks
Read more...
Your Price
$143.48
   In Stock
Replacement Ice Maker
★★★★★
★★★★★
212 Reviews
PartSelect Number PS358591
Manufacturer Part Number 4317943
This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into the ice bucket until the bucket is full. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage, and water quality. You can perform a voltage test with a multimeter or perform an inlet valve test. If you’re unable to make ice, or notice leaks then it may be a sign your ice maker is damaged and could be in need of a replacement. This model measures approximately 11x5 inches, is constructed of plastic and metal, and comes in black/silver. This ice maker is a complete assembly; the whole assembly attaches to the wall of your freezer.
Fixes these symptoms
  • Ice maker dispenses too little ice
  • Ice maker dispenses too much ice
  • Ice maker not making ice
  • See more...
Installation Instructions
GLENN from ORLAND PARK, IL
was not making ice
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not install water inlet kit yet. water under fridge stopped after i changed the ice maker. Read more...
Your Price
$30.34
   In Stock
Door Seal
★★★★★
★★★★★
5 Reviews
PartSelect Number PS8723143
Manufacturer Part Number 00494772
This seal is also referred to as a door gasket, and it is designed for use on dishwashers. It is installed on the door of the appliance, and it seals the space between the tub of the dishwasher and the door. This seal works for prevent water from escaping during the wash cycle. Over time the seal might wear out, or it might get damaged, when that happens you will start to notice leaks. If water is leaking from the door of your dishwasher during operation it may be time for you to replace the door gasket on your appliance. This door seal is made of rubber, and it is black in color.
Fixes these symptoms
Installation Instructions
Phyllis from CLERMONT, FL
Water leak on top of door.
Went to on line video and followed it. The old gasket came right out and the new one fit right in. Started at the top middle and worked the gasket in on both sides to make sure it was evenly spaced. Read more...
Your Price
$5.41
   In Stock
Tine Holder
★★★★★
★★★★★
7 Reviews
PartSelect Number PS8712513
Manufacturer Part Number 00418498
This plastic holder is also known as a tine clip, or a rack flip tine clip. It is used in the lower rack of a dishwasher, it is part of the rack assembly that allows to convert your rack to better the dishes you need washed. When you select the position you want the tines to be in, this clip hold the tines in place. This clip is designed to hold two tine rows in place. This tine clip is simple to install, you do not need any tools, it simply snaps into place on the dishrack.
Installation Instructions
Tom from MACOMB, MI
Missing Tine Holders on upper/lower dish rack.
The old Tine holders used on the upper and lower dish rack dried up and cracked/broke. So I purchased new Tine holders for the upper and lower racks and snapped the new parts in place. Read more...
Your Price
$137.72
   In Stock
Bake Igniter
★★★★★
★★★★★
5 Reviews
PartSelect Number PS8722793
Manufacturer Part Number 00492431
If your gas oven is not heating at all, or not heating properly the most commonly problem is a faulty igniter. The bake igniter is used in gas overs and ranges, the element in the igniter gets hot enough to ignite the gas that lights the oven burner. This bake igniter assembly features a wire harness and push-on wire terminal ends for easy installation. Handle this replacement part with care, do not touch the element inside the igniter as it is very fragile. Before you replace this part make sure you have unplugged your oven and shutoff the gas supply.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Little to no heat when baking
  • See more...
Your Price
$62.26
   In Stock
TUBE
PartSelect Number PS8698345
Manufacturer Part Number 00189023
This authentic OEM venturi tube, also known as a gas tube connector or surface burner tube, mixes gas and air to create the proper fuel-air mixture for combustion in your range. It is typically located in the burner assembly, connecting the gas supply line and the burner. If the venturi tube is broken, you may observe gas leaks around the burner and an abnormal or flickering flame. Failure to replace a broken tube can result in inefficient combustion and poor burner performance. To replace the venturi tube in your range, remove any components covering the burner assembly, such as the burner grate. Consult your user manual for guidance on accessing the venturi tube. Use a wrench or pliers to disconnect the tube from its connections. Please be aware that this replacement part is sold individually.
Your Price
$7.51
   In Stock
Light Bulb - 40W
★★★★★
★★★★★
63 Reviews
PartSelect Number PS884734
Manufacturer Part Number 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Installation Instructions
judie from mays landing, NJ
interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own. Read more...
Your Price
$53.99
   In Stock
SPARK IGNITION SWITCH
★★★★★
★★★★★
2 Reviews
PartSelect Number PS8713460
Manufacturer Part Number 00422748
Your Price
$18.10
   In Stock
Lower Rack Wheel with Clip
★★★★★
★★★★★
10 Reviews
PartSelect Number PS8697067
Manufacturer Part Number 00165314
This dishrack wheel is designed for use on the lower rack of your dishwasher, it allows the rack to roll in and out of your appliance with ease. This roller wheel includes the locking clip required for installation. The roller wheel attaches directly to the rack, you simply snap it into place on the frame of the rack, it does not include the axel. Due to how the roller wheels wear out we recommend replacing them in pairs. The diameter of the wheel is approximately one and a half inches. The roller wheel and clip are made of plastic.
Installation Instructions
Danette from SANTA FE, NM
Missing/broken wheel on right side of lower dishwasher rack
I snapped the part in and voila! Read more...

Appliance Type

Popular Thermador Models

Below are the most popular Thermador models we have. Enter your model number in the search box to find your model.