EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

8046 - Instructions

All Instructions for the 8046
106 - 120 of 1357

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Upper spray arm fell/broke off
7 of 7 people found this instruction helpful.
  • Sharon from Clinton Township, MI
  • Really Easy
  • Less than 15 mins
I researched the problem we had with our dishwasher and found the Parts Select website. My husband and I figured out how to remove the broken part and I selected and purchased the replacement.

The part was shipped quickly and when it arrived I changed the broken part with the replacement in less than five minutes. It seems to be working just fine.

I have added Parts Select to our "favorites" in case we have problems with any of our other appliances. Thanks Parts Select. :)
Was this helpful?
Thank you for voting!
My dishwasher was leaking
8 of 10 people found this instruction helpful.
  • Vincent from CORAM, NY
  • Really Easy
  • Less than 15 mins
This was too easy. I pulled out the bottom rack, spread apart the two clips which are at the bottom of the spray arm with my fingers and pulled out the old broken spray arm. The damage was visible. Then I took the new spray arm ( which looked different but still fit nicely) and gently pushed it into place. Done!
Was this helpful?
Thank you for voting!
The soap dispenser didn’t dispense the soap
7 of 7 people found this instruction helpful.
  • Bernard from ACUSHNET, MA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
After shutting off power to the dishwasher, I removed the two screws holding the door cover on the inside of the door sides, about 8 inches from the bottom of the door. I slid the cover down and off, and unplugged the wires to the dispenser. Then I removed the six screws holding the dispenser in place, removed the old dispenser, installed the new one, replaced the six screws and plugged the wires back in. The door cover and the two screws was all that was left. It took about ten minutes. Easy.
Was this helpful?
Thank you for voting!
leaking water under door
8 of 10 people found this instruction helpful.
  • John from PEABODY, MA
  • Difficult
  • More than 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Well, I actually was unable to make a repair.
Initially I inspected the door gasket and it appeared to be hardened, so i thought a new gasket would fix the problem.
I ordered new gaskets and went back to make the repair. Well, as I was removing the door gasket, I noticed the door bottom had been damaged and was deformed beyond r epair, which was the real reason it was leaking.,
Was this helpful?
Thank you for voting!
Bottom elerment burnt into
8 of 11 people found this instruction helpful.
  • Danny from Gaffney, SC
  • Easy
  • Less than 15 mins
  • Nutdriver, Pliers
First i removed the two screws that hold the element
in place. I the pulled the element out about 3 inches and disconnect the 2 wires. The new one didn't come with the little holders at the front of the element and were very hard to get loose from the old element .i finally got them back on the new one and put it back in the stove. P retty simple job though.
Was this helpful?
Thank you for voting!
arm upper spray unit fell off
7 of 8 people found this instruction helpful.
  • Randall from Mather, CA
  • Really Easy
  • Less than 15 mins
Easiest repair ever. Part came quickly & came fully assembled. Just screwed the part on by hand and it has worked like new ever since. The original part is 3 separate pieces but the new part was all in one & fit perfectly.
Was this helpful?
Thank you for voting!
Oven would not heat, broiler still worked.
7 of 8 people found this instruction helpful.
  • Eric from Lafayette, IN
  • Really Easy
  • Less than 15 mins
  • Nutdriver
I unplugged the stove for precautionary reasons.
I then removed the two screws holding element in place with the correct nutdriver.
I then carefully pulled out the element and pulled the two female spade connectors off.
I then compared to new element and plugged the new element in.
Finally I screwed in the new elem ent and tested the oven.
It worked again!! I would recommend running the oven for a bit before placing anything in to bake. this allows burn off of stuff on the new element.
Was this helpful?
Thank you for voting!
Oven heat element broke in 1/2.
8 of 11 people found this instruction helpful.
  • Keith from LAKEVILLE, OH
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Took screws out back of oven to get to connectors . Pulled old conectors off Installed new element took about 5 min. Very easy job. Also good time to clean oven .
Was this helpful?
Thank you for voting!
Oven light bulb went dark; it needed replacing
10 of 17 people found this instruction helpful.
  • Lise from CEDAR GROVE, NJ
  • Very Easy
  • Less than 15 mins
Twisted replacement bulb into place easily. Let there be light!
Was this helpful?
Thank you for voting!
2 elements stopped working.
9 of 14 people found this instruction helpful.
  • Ruth from MORGANTOWN, WV
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
My husband followed the video instructions and it was easy to fix.
Was this helpful?
Thank you for voting!
Hinges bent , my kid fell on door while it was open
8 of 11 people found this instruction helpful.
  • Timothy from North Haven, CT
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
I went to your website found part# and parts diagram and ordered parts . I picked standard shipping . That evening e-mailed me they were instock and shipped also gave tracking # thet parts were here the next day.I removed the front dec panel then the 4 nut& bolts holding door to hinges(with door in closed position).Then I removed the 2 s crews holding the hinges to the frame/axle. Replaced hinges with new ones .Put screws back in frame/axle . Put 4 nut and bolts back to secure door to hinges . Then i reinstalled under counter put new wheels on lower rack . I then filled it with dishes and ran a long cycle checked for leaks THEIR WERE NONE!!! THANK GOD !! Job complete, Thanks parts direct for a well designed website and detailed pics and parts#. TIM
Was this helpful?
Thank you for voting!
Replace sump gasket
15 of 32 people found this instruction helpful.
  • Greg from Rockwall, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Wrench (Adjustable)
#1 rule, make sure you valve off the water before removing any hoses. Remove wire trays inside dishwasher and then pull out dishwasher far enough to disconnect water line and power cord. Remove center piece and screen covering sump inside the dishwasher. Turn dishwasher on its side and remove hoses to sump and pump. Disconnect power to su mp pump. Loosen retaining nuts that secure the sump and remove. Replace old gasket on sump with new. Turn dishwasher upright. Be careful with placement of new gasket when reinserting sump so that the gasket doesn't come out of position and the sump is centered properly. Secure with retaining nuts from bottom. Reconnect power connector and hoses to sump. Pour enough water into the dishwasher to verify gasket doesn't leak... look with flashlight under dishwasher for signs of water dripping from sump. Reinstall screen and centerpiece in sump inside the dishwasher. Reconnect water line and power cord. Run through wash cycle while monitoring for leaks under dishwasher. Reinstall wire trays.

Piece of cake as long as you get the gasket installed properly and the sump centered correctly... do not overtighten the retaining nuts or it may force the gasket out of position when the screen is secure with the center locking piece over the sump.
Was this helpful?
Thank you for voting!
Dishwasher was leaking out of small gold nut
8 of 11 people found this instruction helpful.
  • Emily from Kyle, TX
  • Easy
  • 15 - 30 mins
  • Pliers
The nut was split down one side, so I first tried to sauder the nut back together. Saudering never goes well for me anyway, but I couldn't get a good enough seal around the nut to make it fit tightly. Then I had to cut off the clear plastic shield to get down in there, just before realizing you could just pull the white wire firmly and it would come loose from the nut. All I had to do then was unscrew the original nut, and screw on the new nut. Then, luckily I had mistakenly ordered an extra clear plastic shield and could replace the one I had previously cut. Dishwasher now runs like a charm!
Was this helpful?
Thank you for voting!
Water fill hose leaked.
7 of 8 people found this instruction helpful.
  • Thomas from Wheaton, IL
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
It is rather easy to repair. After you remove the screws that secure the top of the dishwasher to the countertop you can slide the disherwasher out far enough to gain access to the hose. The hose pulls off after you slide the spring clips down the hose far enough so they no longer grab. Then simply reverse the order and you're done. Less than 30 minutes and you should no longer have to hand wash your dishes!
Was this helpful?
Thank you for voting!
Watch the video on line and it was really that easy to replaced the elements
6 of 6 people found this instruction helpful.
  • Joseph from HATBORO, PA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Went very well and it works!
Was this helpful?
Thank you for voting!
All Instructions for the 8046
106 - 120 of 1357