3VET2 Whirlpool Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light switch wasn't working.. As I would close the door I would notice our frig light wasn't going off...
3 of 4 people
found this instruction helpful.
-
David from Hemet, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I simply removed the old switch by gently pulling down on the old switch with a screwdriver. When it was about half way out I just gently pulled down on the old switch and it popped out... I removed the two connectors attached to the old switch by pulling on the connectors with a pliers...I tried using my fingers but wasn't able to pull t
... Read more
he connectors off so I used pliers. It worked perfectly.. When pulling off the old connectors, make sure you attach the new switch to the same tabs on the new switch... It was very easy to do and took under 5 mins.....The light switch works perfect....P.S. You should unplug the frig while making the connection just in case....Safety first....!!!
Read less
Was this helpful?
Thank you for voting!
Light didnt go on
3 of 5 people
found this instruction helpful.
-
dorotea from staten island, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
The light rocker switch wasnt working. I found the part on the web site. It was so easy. I used a screw driver to pop out the old one and pop the new one in. It took 5 min. Thanks!!!
Was this helpful?
Thank you for voting!
Clear Dairy Door Broken
3 of 5 people
found this instruction helpful.
-
Robert from Hemet, CA
- Really Easy
- Less than 15 mins
It was simply placing the clear $60.00 door in place. It was a very simple fix, but expensive!
Was this helpful?
Thank you for voting!
The handle broke and my wife was afraid to close the door because she might not be able to open it back.
2 of 2 people
found this instruction helpful.
-
Jeff from WINSTON SALEM, NC
- Really Easy
- 15 - 30 mins
-
Screw drivers
The part-select video showed me to do the following:
Unplug dish washer
Open the door and unscrew the screws around the inside of the door all around.
Place the screws in the detergent holder with a cap until finished.
The door mechanism is at the top and attached to two electrical wires.
... Read more
Unfasten the wires from the attachment.
Take the new attachment and fasten the wires to it.
Place the attachment back in the spot and make sure handle is sticking thru the hole to the outside.
Reattach the screws.
Plug back chord.
Finished - 15 minutes
Unplug dish washer
Open the door and unscrew the screws around the inside of the door all around.
Place the screws in the detergent holder with a cap until finished.
The door mechanism is at the top and attached to two electrical wires.
... Read more
Unfasten the wires from the attachment.
Take the new attachment and fasten the wires to it.
Place the attachment back in the spot and make sure handle is sticking thru the hole to the outside.
Reattach the screws.
Plug back chord.
Finished - 15 minutes
Read less
Was this helpful?
Thank you for voting!
Faulty light socket
3 of 5 people
found this instruction helpful.
-
Larry from HOUSTON, TX
- Very Easy
- 15 - 30 mins
-
Screw drivers
Followed the video instructions.
Was this helpful?
Thank you for voting!
My crisper cover frame broke
2 of 2 people
found this instruction helpful.
-
Linda from ROCK ISLAND, IL
- Very Easy
- Less than 15 mins
It was very easy just took out the old broken crisper cover frame out and put in the new one. Simple as that.
Was this helpful?
Thank you for voting!
Drain clogging causing water to leak bottom of fridge
2 of 2 people
found this instruction helpful.
-
Ted C from DSRT HOT SPGS, CA
- Really Easy
- 15 - 30 mins
-
Nutdriver
After watching videos how to replace went very easy.removed ice maker cut wires replaced switch put back together now working ok so far.
Was this helpful?
Thank you for voting!
The trim broke off when my kids yanked a bag out and it got caught in the door trim.
2 of 2 people
found this instruction helpful.
-
Evans from Santa Rosa, CA
- Really Easy
- Less than 15 mins
I removed the broken trim. Then I popped off one of the trim brackets, slid the trim in, and reinserted the trim bracket. I took 1 minute to perform. The part was perfect. Ordering was a breeze because there was a good schematic diagram to select the correct part.
Was this helpful?
Thank you for voting!
Replace meat draw
2 of 2 people
found this instruction helpful.
-
James from BUFFALO, NY
- Really Easy
- Less than 15 mins
Came on time, just slide in
Was this helpful?
Thank you for voting!
The panel on the freezer door broke
2 of 2 people
found this instruction helpful.
-
Carmela from Lincroft,, NJ
- Really Easy
- Less than 15 mins
I followed the directions that came with the new part. Thank you for making it so easy. You sent me everything I needed to make the repair.
Was this helpful?
Thank you for voting!
Broken crisper frame
2 of 2 people
found this instruction helpful.
-
ROGER from GREER, SC
- Really Easy
- Less than 15 mins
Replaced frame
Was this helpful?
Thank you for voting!
Cracked shelf on door
4 of 8 people
found this instruction helpful.
-
Marcia from Chicago, IL
- Really Easy
- Less than 15 mins
I just lifted up the door shelf and removed it. Threw it away and replaced it with the new one. It looks beautiful.
Was this helpful?
Thank you for voting!
Broken meat drawer
3 of 5 people
found this instruction helpful.
-
John from Elkland, PA
- Really Easy
- Less than 15 mins
Replaced, fit perfect
Was this helpful?
Thank you for voting!
The door shelf brace was missing.
2 of 2 people
found this instruction helpful.
-
Gary from COLUMBUS, OH
- Really Easy
- Less than 15 mins
I snapped the two end caps into the shelf rail and pushed it into place on the bottom of the inside door.Tolls were not needed as it was a perfect fit.
Other Parts Used:
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people
found this instruction helpful.
-
Thomas from Roseville, CA
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!