EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38FN Magic Chef Range - Instructions

All Instructions for the 38FN
61 - 75 of 363

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Store-bought drip bowls wouldn't fit.
5 of 6 people found this instruction helpful.
  • Sharon from Yacolt, WA
  • Really Easy
  • Less than 15 mins
My elements just plug in so all I had to do was pull them out and replace the drip bowls. They fit perfectly!
Was this helpful?
Thank you for voting!
electric burner burned out
6 of 9 people found this instruction helpful.
  • Paul from Foley, AL
  • Really Easy
  • Less than 15 mins
This is the second time PartSelect came through for me. If it hadn't been for you guys, I'd have had to buy a new Jenn-Air cooktop, because ours is nearly 30 years old. About two years ago, I bought a new two-burner cartridge, which installed without tools in about one minute. But a few weeks ago, we lost the burner in the other cartri dge. I emailed PartSelect, and even though I gave them my obsolete model number, a helpful service rep managed to find me the part number of the correct burner, so I was able to place my order. Once the part arrived, there was no problem replacing the burner. This is a simple operation we've performed many times when we need to remove the burner for cleaning.
Was this helpful?
Thank you for voting!
Variable oven heat and Ignitor. problems
5 of 6 people found this instruction helpful.
  • Floyd from Kenai, AK
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
moved stove away from the wall, Disconnected power, Removed 2 screws on the access panel and removed panel. Disconnected qwick release conections on heat sensor and ignitor, Removed oven door and burner cover to expose ignitor, removed 2 screws to remove ignitor and replaced ignitor. Removed 2 screws and removed sensor, replaced sensor. Reconnected qwick conects on sensor and ignitor. Replaced oven door, burner cover and access panel and checked out. Checks OK !
Was this helpful?
Thank you for voting!
Indicatror Light For 6" Burner Quit Working
5 of 7 people found this instruction helpful.
  • NANCY from LITTLETON, CO
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Ok this is a glasstop jenn air cce3531b, 5 burners, 11 years old. I am computer data entry employee and 56 years old. I have never done repairs myself in the past but decided to try. I ordered a new burner and indicator light as I wasnt sure which to replace. I found the main breaker and shut it off. I lifted the stovetop out of the counter opening by pushing it through the bottom and placed it on the counter with a towel under it, I had plenty of room to work so that was very easy. I used a nutdriver set to remove 12 screws and lifted off the top very carefully and placed it in the other room , since I had to repair unit thought I would also clean and replace the foam tape around the perimeter of the glasstop. Ok now I unscrewed 4 more screws with the nutdriver and replaced the indicator light, that took about 6 minutes so far. Then I turned the breaker back on and tested and it did not work. Turned breaker back off ,now I replaced the burner by lifting it out of the opening very easily, unscrewed with philips screwdriver 2 screws and the new burner was exactly the same as the existing one so I just slid the old connections off one at a time and replaced them as I went along onto the new burner, screwed it back into place and turned the breaker on and tested it and it worked. I now turned the breaker back off and took off the old foam tape from the glasstop and replaced with new, fit it back onto the base and screwed the 12 screws back in and placed it back into the counter opening and turned breaker back on and now all is fixed and I saved $100 dollars in labor fees. This took 35 minutes and was easy for me. Thanks you partselect
Was this helpful?
Thank you for voting!
Replacement of broil element in wall oven
4 of 4 people found this instruction helpful.
  • David from San Rafael, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
In principle it should be easy to replace the broil element in the wall oven, after unscrewing the supports for the back and front of the element (see other postings for details). The difficulty is with the ground screw, which is inconveniently only accessible from behind close to the back wall of the oven. A very short phillips screw d river is required, but designed so that good torque can be applied for unscrewing and replacing. The newly designed ground connector on the latest replacement elements makes life a little easier, but still be prepared to work slowly and carefully to complete the replacement. Note the new ground screws supplied only work with a flat-blade screw driver, not a phillips-type.
Was this helpful?
Thank you for voting!
Left front burner went out.
5 of 7 people found this instruction helpful.
  • Donald from North Highlands, CA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed 8 screws of retainer holding glass top to box.. Pulled 5 knobs and glass top and set aside. Popped 2 retaining clips holding burner , removed them and transferred to new burner (#12 and #48 position). Used wide blade screwdriver to facilitate removing terminals from old burner and attached terminals to new burner.Popped retaining clips into crossbeam, put glass top on and 8 screws back into retainer. Works great.
Was this helpful?
Thank you for voting!
The 6" heating element stop working on the stove top.
4 of 4 people found this instruction helpful.
  • JULIUS from JACKSON, MI
  • Very Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First I reviewed a video on YouTube by this site. Even though the range on the video was not the same as mind, it gave me an idea on what to do. I proceeded to pull the rang out from the wall and disconnected the power plug. Next I removed two screws from the back located on the left and used a flat blade screw driver to depress two brack ets on the front to release the glass top panel. I unplugged the wiring harness and disconnected the grounding wire and took the glass panel off and laid it upside down on the kitchen table. I removed the old heating element first by unplugging the wiring and removing the brackets that held it in place. Installed the new one, plugged in all wirings, brackets, screws and replace the top back on the stove.
Was this helpful?
Thank you for voting!
The heating element socket had crumbled with age.
4 of 4 people found this instruction helpful.
  • Edward from Webster, NY
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Changing the socket with a new one simply required removing one screw and splicing the two existing wires to the pigtails on the new socket. It took longer to unpack the replacement part than actually doing the job.
Was this helpful?
Thank you for voting!
Oven would not maintain temperature
5 of 7 people found this instruction helpful.
  • KATHY from PLEASANT GAP, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
So simple! I really had no idea what the problem was. I found the PartsSelect site, read the comments from fellow Maytag double oven owners, diagnosed the problem as the sensor and ordered the part. It arrived in only two days! We removed the back of the stove, pulled the old sensor through, plugged the new one in and YAY the oven is l ike new. I have to admit most of the repair time involved sweeping up the dog hair that had accumulated under the stove.
Was this helpful?
Thank you for voting!
burner fell apart
5 of 7 people found this instruction helpful.
  • Barbara a from Huntington, NY
  • Really Easy
  • Less than 15 mins
Plugged in the new burner, which we received in one day.We were delighted with the quick service
Was this helpful?
Thank you for voting!
Timer know would no longer set the time...
5 of 7 people found this instruction helpful.
  • Rachael from Adams, MA
  • Very Difficult
  • More than 2 hours
  • Screw drivers
I removed the screws holding the bezel, removed the control panel frame, unhooked the four wires from the timer, and removed the timer. I cut the glue holding the circuit board into the frame and removed the circuit board. I unsoldered the faulty encoder switch, dissassembled the switch, determined the correct specifications for the swit ch, and ordered the nearest equivalent from an electronics supplier. I modified the new encoder to accept the shaft from the old encoder and I re-drilled the circuit board to fit the new encoder. I then soldered and wired the encoder, reversing the wires to correct the direction of rotation. I then reinstalled everything and added the knob purchased from partselect.com. Now it works. Tough repair - not for the faint of heart or those of average skill. But for the record, installing the knob was of course child's play and took only a moment.
Was this helpful?
Thank you for voting!
Just unscred the 2 screw on the Thermometer
4 of 5 people found this instruction helpful.
  • WILLIAM J from JERSEY CITY, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Unplugged the stove and unscrew the 2 screws on the thermometer inside the stove and unplugged the white plastic in the back of the stove and I had to put the new extra piece that came with the sensor kit as it was needed because the socket were different.
Was this helpful?
Thank you for voting!
burner would not work
4 of 5 people found this instruction helpful.
  • David from Bellefonte, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
slide stove out unplugged it took six screws out put new one in transfered wires pluged back in and it works thank you
Was this helpful?
Thank you for voting!
Panel light burnt out after 10 years
4 of 5 people found this instruction helpful.
  • Pamela from La Junta, CO
  • Really Easy
  • Less than 15 mins
I live in a small town in South East Colorado. We have just a Walmart and Sears and a few smaller hardware stores. I checked all of them to try to find this 25 1/2 inch Fluorescent Light Bulb, and nobody carried one. I would have had to drive 70 miles to find one. The Service of Partselect was wonderful and the bulb showed up in just 4 days. I was lost without this light. I have bought a few other items for my older appliances in the past from Partselect. com and was very happy with the service and how easy the web page is to navigate. .
Was this helpful?
Thank you for voting!
The drip bowls were all caked and corroded.
4 of 5 people found this instruction helpful.
  • Terry from Mountain City, TN
  • Really Easy
  • Less than 15 mins
This wasn't a "repair", but I got an email asking for my story, so here it is. :-)

I followed the owner's manual instructions by pulling out the burner elements, lifting up the old drip bowls, setting in the new ones, replacing the elements.
Was this helpful?
Thank you for voting!
All Instructions for the 38FN
61 - 75 of 363