3521 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake Element shorted out
1 person
found this instruction helpful.
-
Laurie from Clarence, NY
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I first shut off the breaker to the stove - safety first!
I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. ... Read more After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
I used a phillips screw driver to remove the two screws that held the old element in. Then I pulled the old element out and used the pliers to remove the electrical connections. I put the new element in, made the electrical connections and secured it with the screws. ... Read more After restoring powere via the breaker, we tested the stove and it worked. Just call me the Maytag Man!
Read less
Was this helpful?
Thank you for voting!
bakeing element caught fire.
1 person
found this instruction helpful.
-
Leticia from Sunnyvale, CA
- Really Easy
- Less than 15 mins
First I turned off power to the range at the fuse box (very important-The last time I didn't do this and ended up paying a repairman $150.00 to replace the damaged connectors). I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires. I then connected the new ele
... Read more
ment, pushed the element back in and replaced the screws. Turned the power back on and tested the element. The whole job took about 30 minutes because I had trouble disconnecting the old element. I used the flat end of the scrapper to push against the connector while I pulled the element out. Normally it would take only about 15 minutes.
Read less
Was this helpful?
Thank you for voting!
Previous element burnt up
1 person
found this instruction helpful.
-
Betsy from Sun City, AZ
- Really Easy
- Less than 15 mins
-
Screw drivers
I let my husband to the work...But it was very easy. I could have done it! He removed the screws, pulled the wires off previous element. Reattached the wires to the new element and screwed the ends back in place.
Was this helpful?
Thank you for voting!
replacing old drip bowls
1 person
found this instruction helpful.
-
Marion J. from Palmetto, FL
- Really Easy
- Less than 15 mins
It was so simple & the parts fit perfectly. I appreciated all the help from your sales lady. Thanks again.
Other Parts Used:
Was this helpful?
Thank you for voting!
Element burned in half
1 person
found this instruction helpful.
-
James from Allyn, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took two screws out unplugged the element and plugged the new one in and replaced the screws and turned the breaker back on. Works great...Piece of cake..jk
Was this helpful?
Thank you for voting!
bottom bake element broken and burned
1 person
found this instruction helpful.
-
Carolyn S from white oak, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
First throw the breaker on the stove. Remove two screws in back of oven then slowly pull out loosen the wire attachements ......got new part in 2 days just as simple reverse the removal directions.,,,I am over 60 female and it was simple.
Was this helpful?
Thank you for voting!
My light in the refrigerator was going on and off.
1 person
found this instruction helpful.
-
Nan from PURCELLVILLE, VA
- Very Easy
- Less than 15 mins
I unplugged the refrigerator. Pressed the tab near the light bulb. Unplugged the socket and reconnected it.
Was this helpful?
Thank you for voting!
The bake oven element burned out
1 person
found this instruction helpful.
-
Robert from LEXINGTON, MA
- Very Easy
- 15 - 30 mins
-
Screw drivers
Removed two screws and disconnected the element. Reconnected the new element and reinstalled the screws
Was this helpful?
Thank you for voting!
replace broken bake element
1 person
found this instruction helpful.
-
Frances from MOREHEAD, KY
- Very Easy
- 15 - 30 mins
-
Screw drivers
Unplugged the range. Took our the oven shelves. Unscrewed the bars holding the broken bake element to the back of the oven wall. Gently pulled out the wiring to which the bake element is attached. Slipped the ends of the broken bake element off the ending on the wiring. Then slipped the ends of the new bake element over the ends on
... Read more
the wiring. Then pushed the wiring with attached bake element back into their position behind the oven wall and attached the bars holding the bake element to the back of the oven wall. This is really easy because it is exactly like the on-line video, for I am a 75 year old female with little technical experience.
Read less
Was this helpful?
Thank you for voting!
Bake element burned out
1 person
found this instruction helpful.
-
Richard from BOULDER, CO
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Removed the failed bake element per the video linked in the Partselect email. Unlike the video on YouTube the PartSelect video shows that the bake element can easily be replaced through the oven door and it is not necessary to slide the range out and remove a rear panel.
Was this helpful?
Thank you for voting!
Element didn't heat at all
1 person
found this instruction helpful.
-
Roger from PATERSON, NJ
- Very Easy
- Less than 15 mins
-
Pliers, Screw drivers
Removed 2 screws, disconnected wires, attached wires to new element, put screws back. Turned oven on. Perfect.
Was this helpful?
Thank you for voting!
ELECTRIC BURNER SUPPORT FELL OFF AND BURNER SOMETIMES WOULD NOT COME ON.
1 person
found this instruction helpful.
-
RICHARD from SHOW LOW, AZ
- Very Easy
- Less than 15 mins
Stuck the new one into the plugin.
Was this helpful?
Thank you for voting!
Old seal breaking off oven door. Oven not baking food well, wasting heat and fuel.
1 person
found this instruction helpful.
-
Mz from COLUMBIA, ME
- Very Easy
- Less than 15 mins
-
Pliers
Used pliers to remove clips and old seal. Snap in new seal. DONE! Less than 5 mins.
Was this helpful?
Thank you for voting!
One of the broiler drawer guides broke
1 person
found this instruction helpful.
-
Jeri from NEW RICHMOND, OH
- Very Easy
- Less than 15 mins
-
Screw drivers
All I had to do was pull the drawer out and screw on the new part! Awesome experience...and it was so easy to find the part on the website, everything is very clear and with pictures to ensure where the part belongs...who could ask for more?
Was this helpful?
Thank you for voting!
The Baking Element won't heat to bake.
1 person
found this instruction helpful.
-
Kiara from JACKSONVILLE, FL
- Very Easy
- Less than 15 mins
-
Screw drivers
I had the problem before and had to call in a Tech to repair the baking element in my oven. It cost me $150.00 for the repair. This time I decided to do the repair myself, so I went online and found this site The instruction video made it very easy. I am very proud of what I was able to do without calling a Tech. My oven works like new, I
... Read more
t only cost less than $40.00 for the total repair. I am so glad this site were there when I needed them.. Thanks a Lot..
Read less
Was this helpful?
Thank you for voting!