3521 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bake element had burnt in half.
1 person
found this instruction helpful.
-
Joyce from ROCHESTER, IN
- Really Easy
- Less than 15 mins
-
Screw drivers
Watched the video that was available and followed the instructions. Unplugged the stove first,removed the old element, and put the new one in. Video was very helpful and the installation was very easy. Was done in about 10 minutes.
Was this helpful?
Thank you for voting!
The old drip bowls were rusting, no chrome left
3 of 7 people
found this instruction helpful.
-
kathryn from piqua, OH
- Really Easy
- Less than 15 mins
Took the old ones out and put in the new ones! What I am so pleased about it that I just went online and at Parts Select website it was easy to find what I needed, a fair price and the 4 bowls arrived within 2 days!
Other Parts Used:
Was this helpful?
Thank you for voting!
Couldn't find correct drip bowls that fit.
2 of 4 people
found this instruction helpful.
-
Lowell from Hardin, KY
- Really Easy
- Less than 15 mins
Removed old drip bowls, removed burners installed new drip bowls,installed burners. They fit perfect and I received them two days after ordering.
Other Parts Used:
Was this helpful?
Thank you for voting!
My original back leg broke because the floor is uneven. Had to pull it out several times.
1 person
found this instruction helpful.
-
Phyllis from BROWNVILLE, NY
- Really Easy
- Less than 15 mins
-
Wrench (Adjustable)
Put the back of stove on blocks of wood to get high enough to screw the new leg in.
Was this helpful?
Thank you for voting!
Fan broke.
1 person
found this instruction helpful.
-
Steven from Port Angeles, WA
- Really Easy
- Less than 15 mins
-
Socket set
Removed bolt holding lawnmower blade and took out washer, spacer, blade and fan. Cleaned up underside of mower then replaced fan, blade, new insulator, washer and bolt.
Other Parts Used:
Was this helpful?
Thank you for voting!
The bake element burst.
1 person
found this instruction helpful.
-
Diane from Littleton, CO
- Easy
- 30 - 60 mins
-
Screw drivers
Removed the two screws that held the element in place and then pulled off the element from the connectors. Slipped the new connectors on. Tested the oven - Baked some blackberry cobbler!
Was this helpful?
Thank you for voting!
Wife said stove was on fire - Oven element shorted.
1 person
found this instruction helpful.
-
James from Hoyt Lakes, MN
- Easy
- 30 - 60 mins
-
Screw drivers
Removed the old element by removing 2 screws and disconnecting two solderless connectors. One solderless connector was melted in two. I had to remove the rear panel and cut the old connector off and crimped on a new solderless connector. The time required was lengthened due to trip to the hardware store to get a new connector. While I was
... Read more
fixing the oven element my wife replaced the oven light.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Drip Pans were stained and burned on.
1 person
found this instruction helpful.
-
Sandra Collignon from SANTA CLAUS, IN
- Really Easy
- 30 - 60 mins
Replaced drip pan. Notch did not want to match the burner notch. Was a close fit bit with a little pressure made it work.
Was this helpful?
Thank you for voting!
selector switch not smooth and no heat on element
1 person
found this instruction helpful.
-
TUONG from ALBANY, NY
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
un-plug device from outlet for safety first and then remover all top panel after screws lower two side small screws. actually is not selector problem. It was burner switch problem for 6 inches element.
Was this helpful?
Thank you for voting!
Oven baking coil had burned out
1 person
found this instruction helpful.
-
Marie from Fredericksburg, VA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Removed two screws from back of oven ,pulled apart old coil from wires, inserted new coil into the small metal pieces, pushed back and screws replaced. Really easy , anyone can do. Oh, I am 70 years old so probably people younger could do more quickly.
Was this helpful?
Thank you for voting!
lens light was broken and missing.
1 person
found this instruction helpful.
-
Allan from Rolla, MO
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
Removed the cooktop using screwdriver. Pushed lens-light into cooktop hole.It was difficult to do and was where I spent most of my time. Next time I will spray bottom of lens- light with silicon so it goes in easier. I stood cooktop up on its side and inserted the red light assembly onto the lens-light. Reinstalled cooktop <
... Read more
br />and turned electrical power on.
Read less
Was this helpful?
Thank you for voting!
Replace the lower oven element
1 person
found this instruction helpful.
-
Tom from ROCKTON, IL
- Really Easy
- 30 - 60 mins
-
Screw drivers
Unplug the 220 cord..remove rear metal back ( 7-8 Ph/screws)... disconnect the red & yellow connectors from the back of the lower element. Remove-the-lift-off Oven door. Remove the two Ph/screws (one on either end of the element) At the very rear of the oven. Install the new element and reverse the about to reassemble.
Was this helpful?
Thank you for voting!
original fixture required bulb - this fixture (all-in-one) was great
1 person
found this instruction helpful.
-
wesley from ODENVILLE, AL
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Pulled range out from cabinet-wall to get to back side, everthing was clearly exposed tlhen. Just a matter of installing new fixture, putting back on, reconnected power source - put range back in proper place.
Was this helpful?
Thank you for voting!
Jennair cooktop with coils lost one of its coil guides.
1 person
found this instruction helpful.
-
Bruce from SOUTHBURY, CT
- Really Easy
- 30 - 60 mins
-
Socket set
We bought the replacement Ceramic plug and wires, and opened up the jennair cooktop piece and rewired the NEW coil guide into the system. It works great.
Was this helpful?
Thank you for voting!
Replaced upper over light and assembly
1 person
found this instruction helpful.
-
Thomas from SAN DIEGO, CA
- Very Difficult
- More than 2 hours
-
Pliers, Screw drivers
I had to pull out the oven and balance the oven on two patio tables. Remove the back of the oven. Pull out the light assembly which was burnt. I was unable to remove the casing around the light, so I destroyed it with a pliers. Reinstalling the new light and assembly was easy. What made this job difficult, I could not remove the light ass
... Read more
embly from the front of the oven and had to go in from the back.
Read less
Was this helpful?
Thank you for voting!