EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3521 - Instructions

All Instructions for the 3521
106 - 120 of 422

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
burner receptacle failed (stove over 30 years old)
1 person found this instruction helpful.
  • BETH from COUNCE, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Took out burner (pulls out) Took out one screw that holds recep. in, cut the two old wires and attached new wires with wire nuts included in the new package.
Was this helpful?
Thank you for voting!
My oven door seal had dried rotted
1 person found this instruction helpful.
  • Anita from ELKTON, VA
  • Really Easy
  • 15 - 30 mins
  • Pliers
I took pliers to get the old one off, and popped the new one back in its place, and it fit perfect.
Was this helpful?
Thank you for voting!
Lower element out-oven wouldn't heat
1 person found this instruction helpful.
  • PATSY from HALLWOOD, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the two screws at the rear of the oven and pulled out the existing element, plugged in the new element, pushing it back in place and mounted the screws back in the bracket. I then made the "Tim the Tool Man" grunt noises feeling very proud that I am now officially a Handy Woman!
Was this helpful?
Thank you for voting!
Oven wouldn't heat
1 person found this instruction helpful.
  • Jonathan from Havertown, PA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Easiest repair ever.

#1 - Turn off power (or you will get electricutued).
#2 - Unscrew back of heating elements
#3 - Disconnect wires (may need pliers)
#4 - Attach new heating element
#5 - Put in screws

Everything took 15 mintes max.
Was this helpful?
Thank you for voting!
bake element disintegrated!
1 person found this instruction helpful.
  • Susan from Grand Ledge, MI
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Seems every 5 years this bake element totally disintegrates, so we,re experienced! Pull the stove out and remove the back, remove the 2 screws that hold the element(now in 5 pieces), diconnect and discard. Place new element in and connect, replace the 2 screws holding the element in place. Replace stove back. Easy
Was this helpful?
Thank you for voting!
Bottom Element Burned out
1 person found this instruction helpful.
  • Robert from Jacksonville, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Turned off all power to range.
Removed two Philip head screws
Gentle pulled unit Element forward
Removed two push on connectors
(Do not let wires fall back into oven holes)

Reversed the process.
Was this helpful?
Thank you for voting!
Lower burner not heating:
1 person found this instruction helpful.
  • John from Fishers, IN
  • Easy
  • 15 - 30 mins
  • Screw drivers
Ordered element and recieved in two days(yea). Removed back cover from unit. Removed two wire slide on wire clips. Then went inside oven cavity and removed two screws holding element intact. The element slid out. Installed element, re-installed two screws to hold element intact. Attached wire clips back on to element, re-attached back cover. Plugged unit back in and it worked perfectly. Eazy-peezy lemon squeezy.

John
Johnny on the Spot Home Repairs
Fishers, Indiana 317-997-3600
Was this helpful?
Thank you for voting!
No Bake, only Broil
1 person found this instruction helpful.
  • Edward from Adamstown, MD
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
POWER OFF! Unplugged oven from wall.

(Note: I found it easier to disconnect the wires from the element by removing the rear cover. Fumbling around inside the oven was getting me nowhere.)

Removed rear cover.
Disconnected old element.
Unscrewed the old element from inside the oven, removed, and installed t he new element. Screwed the new element in place.
Reconnected wires in back, installed the back cover.
Connected power.
Tested. Good as new.
Was this helpful?
Thank you for voting!
Fridge light dead even with new bulb
1 person found this instruction helpful.
  • marj from NEWBURY PARK, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
1- youtubed the potential diagnoses, 2- resourced and ordered parts, 3- removed old socket, installed new one :-)... My fridge is an older fridge and could've used a screwdriver for eyeglasses. Plug and play easy... YAY!
Was this helpful?
Thank you for voting!
Bake element burned out
1 person found this instruction helpful.
  • Donald from Tomahawk, WI
  • Really Easy
  • 15 - 30 mins
Very simple fix--unpugged two fittings in the back of oven plugged in the new element and it was done.The Best part was that the element burned out on a Sunday and I ordered the part that day and it shipped on Monday and received part on Wed AM.This is the second time I've had to replace the element and by ordering through Part Select I s aved $24.00 versus buying it from an appliance store.

Don Samuelson
Was this helpful?
Thank you for voting!
oven didn't heat up
1 person found this instruction helpful.
  • robert from merrimack, NH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed the old element by taking out two screws then removed the two wires. pulled out the old element , put the new one in . connected the wires and screwed it in. Done.
Was this helpful?
Thank you for voting!
The element was completely gone.
1 person found this instruction helpful.
  • Hudson from Cockeysville, MD
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off power, removed 2 screws, un-hooked the connections, them put in the new element in reverse order.
Was this helpful?
Thank you for voting!
burner would not heat.
1 person found this instruction helpful.
  • Jackie from Hughes Springs, TX
  • Really Easy
  • Less than 15 mins
I unpluged the old burner and pluged the new one in. Repair done in about 2 min,
Was this helpful?
Thank you for voting!
fireworks in the oven. Burned completely in two.
1 person found this instruction helpful.
  • Shelly from Allentown, PA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
My husband has moved out of state for his job. I am left here with the children until the house sells. This is the first time I have ever had to do any oven repair. I had excellent and fast service - my part came right away. I took out the 2 screws holding the element in place, pulled the element out, disconnected the old element, connect ed the new one, pushed it back in, and replaced the screws. No problem at all. I was a little nervous turning it all back on, but it is working perfectly!
Was this helpful?
Thank you for voting!
My oven sparked, then wasn't working, so I turned to the internet.
1 person found this instruction helpful.
  • Joan from Medford, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I received the new element on the third day, followed simple directions, and voila! I'm baking again.
First I unplugged the stove. Important!. Then with a phillips head screwdriver I removed the two screws at the back of the oven. The transition from busted to new was easy because there was a slide-in connection to the wires, not screws. The best advice was sticking duct tape on the wires so they wouldn't go back into the inner sanctum before I was able to attach the new element. Hey, I'm a 72-year-old grandma, and it was easy!
Was this helpful?
Thank you for voting!
All Instructions for the 3521
106 - 120 of 422