EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3521 - Instructions

All Instructions for the 3521
76 - 90 of 422

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Used part
2 of 3 people found this instruction helpful.
  • Sabrina from FREMONT, CA
  • Very Easy
  • Less than 15 mins
Lift burners out of plug discard old drip pans replace new drip pans into plugs and done .
Was this helpful?
Thank you for voting!
needed to replace stove pans and burner
3 of 6 people found this instruction helpful.
  • Marylou from Sitka, AL
  • Really Easy
  • Less than 15 mins
An easy replacement job.

Service from you was prompt and the replacement parts arrived in perfect condition...thanks
Was this helpful?
Thank you for voting!
I needed a broiler pan
4 of 9 people found this instruction helpful.
  • Rhoda P. from Secaucus, NJ
  • Really Easy
  • Less than 15 mins
I took the broiler pan out of the shipping container and put it in the oven.
Was this helpful?
Thank you for voting!
Bake element would no longer heat up
1 person found this instruction helpful.
  • Joe from Schertz, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I unplug the stove first. Then took off two screws that held the bake element in place. Pulled off the connectors using the pliers. Had to use pliers because they were really snug. Plug in the wires to the new base element. Crimped down the connectors a little bit to make sure they were snug. Inserted the bake element back into the holes at the back of the oven. Put the two screws back in. Plugged the oven back in and turned it on to make sure it worked. Lastly, tossed the old bake element in the trash. Really easy job. Glad I didn't pay anybody to do this.
Was this helpful?
Thank you for voting!
The oven heating element burned out like a lit fuse!
1 person found this instruction helpful.
  • Herbert from Neenah, WI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 2 phillips screws, unplugged 2 wires, threw away old element. Installation of the new element was just as easy but in reverse order. Piece of cake!
Was this helpful?
Thank you for voting!
Element burned out.
2 of 4 people found this instruction helpful.
  • Raymond from Ottawa, OH
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I removed the two screws that hold the element in place. I then pulled the element out aobut 3 inches and disconnected the wires.
Was this helpful?
Thank you for voting!
Element burned out.
1 person found this instruction helpful.
  • Wayne from Marietta, GA
  • Easy
  • Less than 15 mins
  • Screw drivers
Turn off breaker.
Unscrew old element, disconnect wires.
Connect wires to new element, tighten screws.
Breaker back to ON.
Done.
Was this helpful?
Thank you for voting!
Bake Element Melted
1 person found this instruction helpful.
  • Bert from S. Easton, MA
  • Easy
  • Less than 15 mins
  • Screw drivers
Unplugged stove, unscrewed element pulled element out about 3 inces and disconnected element. Took model of stove looked on line for part. PartSelect had the best price and easiest web site to order part. Ordered part about 4pm and received part in 2 days. Took element out of box plug into connections and screwed the element back in. Plugged stove in and worked perfect.
Was this helpful?
Thank you for voting!
snapped element
1 person found this instruction helpful.
  • Paul from Yukon, OK
  • Easy
  • Less than 15 mins
  • Screw drivers
switch off the range. undo the two screws & unplug the two tabs. Replace with new element, connect two tabs, screw back in place. done!
recieved my replacement part the next day after ordering
Was this helpful?
Thank you for voting!
bulb out
1 person found this instruction helpful.
  • Kenneth from Rowe, VA
  • Really Easy
  • Less than 15 mins
I ordered the part, within two days we had received it. My husband put the part in and I really don't know what he used doing so. All I know is that the light works now and we don't have to use the flashlight. Thanks a lot.
Was this helpful?
Thank you for voting!
element burnt into.
1 person found this instruction helpful.
  • John from Overton, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
The part came quick and packed very well. I moved the stove out and un pluged it. opened oven door and took a philips screwdriver and took the screws out at the back of element..Slid it out with the two wires attached and unpluged the conectors. pluged the conectors on to the new element and slid it back in. Had a chocolate cake in 35 minuts.
Thanks, John in Texas
Was this helpful?
Thank you for voting!
Bake Element broke
1 person found this instruction helpful.
  • Joseph from Warwick, RI
  • Really Easy
  • Less than 15 mins
  • Screw drivers
****Threw the breaker switch for the oven to the 'off' position****. Opened the oven. Unscrewed the phillips head screws at the back of the old element. Removed the connecting wire, taping them to the stove so that they wouldn't recede into the hole. Securely attached the connecting wires to the new element. Pushed the wires back into th e holes in the stove. Removed the tape from the oven. Screwed the element into place. ****Threw the breaker switch back to the 'on' position****. Process took under 10 minutes.

DO NOT FORGET TO UNPLUG OR TURN OFF BREAKER BEFORE DOING ANYTHING WITH THE WIRES. Don't forget to turn it back on again when you are done.
Was this helpful?
Thank you for voting!
hot spot in center of bake element appeared suggesting failure was imminent
1 person found this instruction helpful.
  • burton from prides crossing, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
pulled breaker,removed oven door,removed 2 screws,pulled bake element out 3 inches,pulled connections off,pushed connectors on new element,pushed new element back and replaced screws,replaced oven door ,pushed breaker back and turned on oven and let it heat up to 350 degrees.
Total time 10 minutes,even a caveman could do it.
Was this helpful?
Thank you for voting!
BurntBaking Element Element
1 person found this instruction helpful.
  • Matt from Lewisburg, TN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turn Off the BREAKER!!!
Unplug the stove/oven
Opened the oven door
Unscrewed the baking element for the oven
Pulled the old element out about 3"
Disconnected the wire clip on both sides
Plugged the element into the clips
Screwed element back into place
Plugged oven in ,turned on breaker
PREST O DONE
Was this helpful?
Thank you for voting!
element had cracked
1 person found this instruction helpful.
  • TONI from SALISBURY, NC
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
First I cut the power to the stove. Then I unscrewed the two screws. Pulled the element out a few inches. I had to use pliers to disconnect it from its wires. It was a very tight fit. Then I reconnected the new element. Cut the power back and and fired her up. Boy did she burn like fire.
Was this helpful?
Thank you for voting!
All Instructions for the 3521
76 - 90 of 422