EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3422 - Instructions

All Instructions for the 3422
91 - 105 of 592

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Shelf
4 of 5 people found this instruction helpful.
  • Benjamin from West Linn, OR
  • Really Easy
  • Less than 15 mins
Put shelf on door, done.
Was this helpful?
Thank you for voting!
ice maker went bad
4 of 5 people found this instruction helpful.
  • nathan from gillette, WY
  • Really Easy
  • Less than 15 mins
  • Nutdriver
take the ice bin out of freezer. there are 2- 1/4" screws. these screws only need to be loosened a few turns. the ice maker can be slightly lifted up and will come off the screws. unhook the wire harness. take the "L" bracket off the old ice maker and put on the new one. set the new ice maker in. hook up the wire harness. put the new ice maker over the screws, tuck the wires out of the way and pull down into place. tighten the screws.
Was this helpful?
Thank you for voting!
2 broken door bins
4 of 5 people found this instruction helpful.
  • RICHARD from Tampa, FL
  • Easy
  • Less than 15 mins
The parts arrived fast, and fit just perfect, they just slide in and snap lock into place. 1 had been broken 2 years ago and I just put off fixing it thinking I would not get the right part, then we broke a seconded one. This web-site made it very easy, and I was pretty sure when I ordered them that they would fit. Thanks for everything
Was this helpful?
Thank you for voting!
Every thing went smooth
4 of 5 people found this instruction helpful.
  • Micu from MOJAVE, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
But I have back ground mechanical skills, I did see the video one time, and everything went smooth......
Was this helpful?
Thank you for voting!
Ice Maker ffss2614qpo
4 of 5 people found this instruction helpful.
  • Dante from SOUTHOLD, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Looked it up on how to, follow the video
. Very easy 1-2-3 it was out and new one in..........??.
Was this helpful?
Thank you for voting!
Needed to replace the oven door gasket/seal
4 of 5 people found this instruction helpful.
  • Daniel from Katy, TX
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Removed door from oven by pulling up at the first stop point after opening the door. Removed the outer shell by removing 5 screws. Disassembled the inner door by removing 6 screws. Be careful with the insulation blanket (fits in a molded portion of the inner door). Glass windows can be removed (for cleaning) via a couple screws. Old gasket/seal is held in-place via spring-clips; just squeezed each clip, pushed each thru their respective holes, and pulled off the worn-out gasket. New gasket snapped in-place by pushing the clips thru the respective holes. Reverse the process to reassemble the door. You can do this job in 15-20 minutes. Took us longer because it took some elbow-grease (and patience) to clean the crud off the glass windows.
Was this helpful?
Thank you for voting!
Rust on Front Plate and Drive Blade
6 of 11 people found this instruction helpful.
  • Wayne from Westford, MA
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
Downloaded a schematic of the ice container. Disassembled the ice container, keeping track of which different type of screws went where. Followed the schematic to ensure proper sequence of blades and spacers. Manually rotated unit prior to installing into the freezer in case of binding. Finished.
Was this helpful?
Thank you for voting!
ice maker wouldn; dinspense ice'
3 of 3 people found this instruction helpful.
  • Charles from JACKSONVILLE, FL
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
removed ice denspenser and replaced spring and flap'
Was this helpful?
Thank you for voting!
Self tapping screws stripped out, one broke in mounting hole
3 of 3 people found this instruction helpful.
  • Scott from FORT WORTH, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Punched out broken screw. Drilled out damaged threads to same size as igniter mounting holes. I used nuts, bolts and lock washers to mount igniter. Would have been very easy if mounting screws had come out. Video very helpful.
Was this helpful?
Thank you for voting!
Oven ignighter no longer works
3 of 3 people found this instruction helpful.
  • Barry from PORTERVILLE, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Socket set
Well Got the part within 3 days. Followed instructions to install it and it worked. One thing you need to add to your kit is replacement mounting screws (2 nuts and bolts). It turns out that the original burner because of its age, had a hard time unscrewing it. The screws were very tight and ended up stripped. I ended up using a Dremel  t ool to cut the screws off. By now the holes were a little bigger than original so I had to put it back together with a nut and bolt that would fit the small hole. But overall this was my first repair and I would definitely order from you again. Your site's part search and documentation with video clarified it wonderfully. Great service and site!

Barry
Was this helpful?
Thank you for voting!
Broken Drum
3 of 3 people found this instruction helpful.
  • Jubal from OZARK, AL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
Had to disassemble the entire ice maker bucket. Simple and straightforward, didn't need any pictures or reference materials. Just time consuming.
Was this helpful?
Thank you for voting!
OVEN WOULD NOT HEAT
3 of 3 people found this instruction helpful.
  • Mary from MEADVILLE, PA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
TOOK OVEN BOTTOM APART AND LOSSENED OLD IGNITERTHEN WENT TO BACK OF OVEN TOOK BACK OFF DISCONETED OLD IGNITER PULLED THE NEW THUR AND CONNECTED PUT BACK ON THEN ATTACHED FROM THE FRONT PUT OVEN BACK TOGATHER THEN TURNED OVEN ON IT WORKED I DID IT MYSELF I AM 64 YEAR OLD WOMEN
Was this helpful?
Thank you for voting!
Ice maker stopped making ice.
4 of 6 people found this instruction helpful.
  • Thomas from WESTAMPTON, NJ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver
The repair was fast and easy .I removed the ice tray , disconnected the wiring connector and lossend two screws. I removed ice maker assy.and repeated in reverse order to install. I also installed a new water filter. I had ice in about 20 minutes.
Was this helpful?
Thank you for voting!
Ice maker quit working
4 of 6 people found this instruction helpful.
  • Gary from Granbury, TX
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Pliers
Remove ice pan below ice maker. Got mirrow verifed the type of screws. Obtained nut driver and felt it at right angle remove screws only have way. The ice maker lifts up and off. Took needle nose pliers to grip and remove electrical connection plug. The instruction and picture sent was no help the picture were the size of a thumb nail no detail could be determine. I installed the adapter plug and all the extra length wiring was the most difficult to type wrap with both hands extended out in front. I finally wrestled it in on to the two screws unscrewed from the wall about 1/2". Keep the ice maker water lever up and ensure it aligns to the water trough inlet. Works Great.
glg
Was this helpful?
Thank you for voting!
Oven wouldn't heat/ turn on
3 of 3 people found this instruction helpful.
  • Diane from NEW HAVEN, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
If you watched the video on installing the part it IS that easy. The connector piece matched exactly with what my oven already had so it was as simple as disconnecting the old piece and plugging in the new piece. There was no hidden challenges or obstacles to overcome. The oven works perfectly fine there was a slight smell when I first turned on the oven but I am attributing that to a new part. The smell did go away. I am 24 years old and a female who has limited knowledge in electrical/oven work.
Was this helpful?
Thank you for voting!
All Instructions for the 3422
91 - 105 of 592