EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3422 - Overview

Models starting with 3422

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper Support - Rear – Part Number: 241993001
$17.18
In Stock
Crisper Support - Rear
★★★★★
★★★★★
(21)
Part #241993001
The crisper drawer cover rests on this support, which mounts inside the refrigerator cabinet wall. This is an OEM replacement part. Confirm it fits your refrigerator model before ordering.
Light Bulb - 40W – Part Number: 8009
$19.54
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(78)
Part #8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part. It is constructed of glass and metal and is sold individually. Depending on the appliance and location of the bulb within it, you may want to consider disconnecting power and using a flashlight for easier access to unscrewing and re-screwing in your bulb during this repair.
Flat Style Oven Igniter Kit – Part Number: 12400035
$50.56
On Order
Flat Style Oven Igniter Kit
★★★★★
★★★★★
(68)
Part #12400035
The flat style oven igniter kit is used in gas ovens and ranges. It is what provides the heat needed to open the gas valve, and it ignites fuel for the burner assembly. This part can be used for both bake and broil elements, and it can replace both short and long igniters. However, it cannot replace round style oven igniters. If your igniter glows for 90 seconds or more without igniting the burner, this means it is too weak to open the valve. The element in your igniter may have shorted it and it might not glow at all, or it might only glow orange or red. It needs to glow white hot; if it cannot get hot enough the gas will not be released from the safety valve and it will be impossible to light the burner in your oven. This kit includes the igniter, ceramic wire nuts, an insulation pad, a metal bracket, a variety of plug ends, and an instruction sheet. The body length is 3 3/4 inches, and the element inside is approximately 1 1/2 inches. This replacement part has an amperage range of 3.3 to 3.6. The element inside this igniter is extremely fragile, do not touch it. Before you start repairing your oven or range, make sure you have unplugged it and shut off the gas supply.
Door Closing Cam – Part Number: 240457701
$59.35
In Stock
Door Closing Cam
★★★★★
★★★★★
(32)
Part #240457701
This door closing cam works with the lower hinge mechanism to help the refrigerator or freezer door move into its closed position. It is located at the bottom of the door and is sold individually. A worn or damaged cam may cause clicking during movement or prevent the door from closing smoothly. Inspect the cam and surrounding hinge parts if the door sags or closes unevenly, since other faults can cause similar symptoms. Match the cam to the appliance parts diagram and follow the door support instructions before removing hinge hardware. This is an OEM part sourced directly from the manufacturer.
Refrigerator Ice Maker Assembly – Part Number: 241798231
$87.51
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(99)
Part #241798231
This 8-cube ice maker is used to create ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold in to the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.
Light Bulb - 40W – Part Number: 40A15
$21.95
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(10)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
Door Bin – Part Number: 240363702
$62.65
In Stock
Door Bin
★★★★★
★★★★★
(20)
Part #240363702
This clear plastic door bin holds jars, containers, and 2 liter bottles inside the refrigerator door. It snaps into the specified lower shelf position without tools. Cracks, broken edges, or damaged mounting areas may keep the bin from sitting securely or supporting its contents. Inspect the bin and door attachment points before replacement. Align the replacement with the mounting supports and check that it is fully seated before loading it. Confirm the lower door location in the appliance parts diagram, since upper bins may look similar but have a different fit. This is an OEM part sourced directly from the manufacturer.
Replacement Ice Maker – Part Number: 5303918277
$99.95
In Stock
Replacement Ice Maker
★★★★★
★★★★★
(36)
Part #5303918277
Fresh ice is produced automatically by this refrigerator ice maker assembly, which fills its mold, freezes water, and releases cubes into the storage bin. Its heat release mechanism briefly warms the mold to loosen the ice during harvesting. A damaged or failed assembly may stop cycling, leave cubes stuck in the mold, or leak into the bucket. Replacing a faulty unit helps restore automatic ice production. The assembly includes a wiring harness and adapter plug to support the electrical connections used by the replacement kit. This is an OEM part sourced directly from the manufacturer.
Screw – Part Number: W11233072
$21.45
In Stock
Screw
★★★★★
★★★★★
(6)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Refrigerator Door Bin – Part Number: 240324502
$80.25
In Stock
Refrigerator Door Bin
★★★★★
★★★★★
(20)
Part #240324502
This clear plastic door bin holds bottles, jars, and gallon sized containers inside the refrigerator door. It attaches to the door mounting tabs and can be replaced without tools. Cracks, broken walls, or damaged mounting areas may keep the bin from sitting securely or supporting its contents. Lift the old bin from the tabs, then align the replacement and lower it into position. Check that it is fully seated before loading it. Confirm the correct door location and mounting shape, since different bins within the same refrigerator may have different sizes. This is an OEM part sourced directly from the manufacturer.
Dispenser Crusher Housing – Part Number: 241885001
$71.98
In Stock
Dispenser Crusher Housing
★★★★★
★★★★★
(26)
Part #241885001
This dispenser crusher housing may also be known as a refrigerator ice crusher housing, and is compatible with your refrigerator. The function of the dispenser crusher housing is to shield the ice crushing blades within the ice container. To make this repair you will need a Phillips screwdriver, a flat blade screwdriver, a quarter-inch nut driver, and a pair of channel lock pliers. For this installation, work gloves are recommended. Note that this piece may look different or be a different color than the original, but this part will fit and function in the same way as the original part.
Valve Knob – Part Number: WP7711P135-60
$36.85
In Stock
Valve Knob
★★★★★
★★★★★
(4)
Part #WP7711P135-60
This valve knob is also known as control knob, burn valve, and burner knob. It fits on your stovetop or range to control the heat of the surface burner. No tools are required for this repair, simply remove your old knob by lifting straight up and off, and replace with the new knob by aligning the D-shapes on the shaft and knob and pushing straight down. This part is made of plastic, and is black in color. This knob accepts a D-shaped shaft. It is sold individually, so consider checking other knobs in case they need to be replaced as well.

Exact Part matches for your search term

Spacer, .630 x 1.00 x .169 – Part Number: 3422
No Longer Available
Spacer, .630 x 1.00 x .169
This part number matches the current model number 3422
Part #3422
Knob pilot – Part Number: 3422
No Longer Available
Knob pilot
This part number matches the current model number 3422
Part #3422

Common Symptoms of models starting with 3422

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would not work but the Broiler did
337 of 374 people found this instruction helpful.
  • James from Ferndale, MI
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver, Screw drivers, Socket set
The oven had been working intermittently for a while and after repeated threats of starvation from my spouse I finally took a look even though it was summer and the grill was working fine. The Igniter would glow red when the oven was turned on but the gas would not flow to it no matter what the temperature setting. I searched online and f ound this site that explained it was possible for the igniter to glow but if it was not drawing the correct amperage (because its resistance was too high) then the main brain would not allow the gas valve to open. So I took a look at the broiler and it had the same igniter. I measure the resistance of both of them and the oven igniters resistance was higher (don't rememeber the reading) then I moved the Igniter from the broiler to the oven and the oven worked from there it was just a matter of ordering the part. End of story except for I am still doing all the cooking on the barbecue outside.
Was this helpful?
Thank you for voting!
Broken ice maker
255 of 345 people found this instruction helpful.
  • Juan from Miami, FL
  • Really Easy
  • 15 - 30 mins
  • Socket set
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice.
Was this helpful?
Thank you for voting!
Ice Maker Stopped Working
164 of 183 people found this instruction helpful.
  • JACK from MESA, AZ
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
It was pretty straight forward. Remove the two screws that hold the unit to the wall of the freezer. In my case, I had to use a different ice maker than what came with the frig. In order to install the replacement unit they sent a wire adaptor so it would attach to the existing wiring. That too was all fine and dandy. The only p roblem was that the end of the wire adaptor did not fit through the existing hole in the rear of the frig. I used a utility knife to cut through the thin metal lining. That worked just fine. However, I could not cut through the insulation because I could not reach it through the small hole. The excess wire was supposed to be pulled through the hole and out through the back of the unit. So now the excess is between the wall of the freezer and the insulation. The unit is working wonderfully. In fact, it is making more ice than I can use. I am very pleased with the replacement unit. This is the 3rd ice maker that has been in this frig. All the others had a design flaw that had a leak in the rear of the unit. This caused all the ice to form into a big block. The replacement unit has not had this problem so far. Thank you for allowing me to explain my situation so that maybe others may benifit from my experience. Thank you. Jack
Was this helpful?
Thank you for voting!