EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3422 - Instructions

All Instructions for the 3422
46 - 60 of 592

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Interior light needed replaced
22 of 46 people found this instruction helpful.
  • Leo from TWIN FALLS, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
Right door makes loud poping sound when open and close
12 of 16 people found this instruction helpful.
  • HUNG from CARSON, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I followed step by step instruction in the hinge kit; Replacing the old hinge with a new hinge and two new plastic cams in the kit. The kit hinge has an adjustment to level the right door with the left door. Everything is done in 20 minutes for a senior guy like me. Very easy.
Was this helpful?
Thank you for voting!
Ice maker failed
11 of 13 people found this instruction helpful.
  • Mary from SOUTH LYON, MI
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.
Was this helpful?
Thank you for voting!
housing-crusher was broken
12 of 16 people found this instruction helpful.
  • Bob from Milton, WV
  • Easy
  • 15 - 30 mins
  • Screw drivers
removed ice maker box and disassembled crusher unit on front of box and installed new housing.
Was this helpful?
Thank you for voting!
The module cover was broken when it was removed improperly
12 of 16 people found this instruction helpful.
  • Wendy from Columbus, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
I simply unscrewed the original and replaced it with the replacement. It was very easy. I did have to order the label as the original one would not come off to be re-used. Hopefully, that will go on easily as well.
Was this helpful?
Thank you for voting!
oven won't stay light
10 of 10 people found this instruction helpful.
  • Shannon from Lake Park, IA
  • Easy
  • 15 - 30 mins
  • Screw drivers
removed racks, bottom plate. removed screws with a little bit of help from cooking spray. Unclipped old ignitor clipped in new ignitor, used old screws, and inserted insulation replaced racks, bottom shelf. Turn on oven and worked, been using it for about a week now. PS. ordered on monday morning arrived wednesday afternoon.
Was this helpful?
Thank you for voting!
Rust had corroded Front Plate and Drive Blade
11 of 15 people found this instruction helpful.
  • Calvin from Massillon, OH
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
Was this helpful?
Thank you for voting!
There was a hole in the plastic bin where ice fell through to the freezer.
9 of 9 people found this instruction helpful.
  • Thomas from Niceville, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refr igerator.
It took me about 5 to 10 minutes. It's really easy!
Was this helpful?
Thank you for voting!
Ice maker was not making ice
9 of 10 people found this instruction helpful.
  • Jeffrey from Indianapolis, IN
  • Easy
  • Less than 15 mins
  • Nutdriver
I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAI T OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!
Was this helpful?
Thank you for voting!
Twice I ordered the oven light bulb & each time the light bulb was defected
18 of 38 people found this instruction helpful.
  • Barbara from BELLEVUE, WA
  • Very Difficult
  • Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Was this helpful?
Thank you for voting!
Oven wouldn't ignite
8 of 8 people found this instruction helpful.
  • Treasure from High Point, NC
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I unpuged the Range. Then I removed all racks and bottom tray of oven.
The Ignitor is located at back of oven, paralelle to the gas bar. I removed the 2 screws holding the ignitor and unpluged the wires. Then I put on the new ignitor, perfect fit, replaced the 2 screws and pluged in the wires , then pluged in the range. I tur ned the oven on and it lit in about 10 seconds.
Thank you PartSelect for having such a wide range of range & oven parts . no one should have to pay a service tech. to fix most problems, as long as we have a GREAT SITE LIKE THIS ONE.
p.s. You guy also had one of the lowest prices , my part arrived ahead of schedule .
THANKS A LOT !
Was this helpful?
Thank you for voting!
Original oven light lens had cracked and broken in two.
17 of 36 people found this instruction helpful.
  • Pat from Bucklin, KS
  • Really Easy
  • Less than 15 mins
I screwed the light lens into the socket and went beautifully. Better than the original. (I am a retired, 75 yr. old woman).
Was this helpful?
Thank you for voting!
Ice Would Not Dispence
17 of 36 people found this instruction helpful.
  • Jerry Baten from Pampa, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Took the ice storage bin out. Took the unit apart,and disamble the augar unit. Ordered parts from manufacture, which arrived in two days. As soon as I got the parts, I reassambled it. Work perfect. Good job!
Was this helpful?
Thank you for voting!
Oven would not heat but Broiler would
8 of 9 people found this instruction helpful.
  • Robert from Hudson, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Wrench (Adjustable)
Turn off the gas supply and unplug the power cord. Remove the screw on the back plate for the metal tab that covers the valve. Bend the tab up to expose the valve. Remove the gas line that feeds the broiler with an adjustable wrench. Remove the mounting screw for the valve. Loosen the valve inlet gas line fitting with an adjustable wr ench. Lift the valve out. Reverse the steps to install the new valve.
Was this helpful?
Thank you for voting!
plastic closer plate broken
8 of 9 people found this instruction helpful.
  • Sandra from Alto, NM
  • Easy
  • 15 - 30 mins
First removed food from the refrigerator door.

Second removed plastic cover plate and metal plate assembly from top of door.

Third lifted door of metal pin on bottom.

Fourth removed broken closer plate and replaced
with new closer plate.

Set door back in place.

Re secured the met al plate and plastic cover plate.

Replaced the door shelves and food. DONE.
Was this helpful?
Thank you for voting!
All Instructions for the 3422
46 - 60 of 592