3334 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
bottom hinge on door was broken made a clicking noise everytime you opened the door
2 of 2 people
found this instruction helpful.
-
James from WAVERLY, MN
- Really Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
just followed the instructions
Was this helpful?
Thank you for voting!
Replacing water dispenser actuator
2 of 2 people
found this instruction helpful.
-
Craig from Westlake, OH
- A Bit Difficult
- 15 - 30 mins
-
Screw drivers
I followed instructions given by Jonathan from Universal City TX. I wasn't able to disconnect the panel frame wiring harness, so I just let the frame hang. I also had a bit of trouble snapping the actuator into place. Once I did, however, the rest was easy. Thanks Jonathan for the instructions!
Was this helpful?
Thank you for voting!
Part broke though normal use
7 of 17 people
found this instruction helpful.
-
Hugh from Berthoud, CO
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Called "local" repair warehouse and ordered part. They shipped the wrong part. Went on-line to Part Select and got the right part.
Was this helpful?
Thank you for voting!
Ice crusher selection door broken
2 of 2 people
found this instruction helpful.
-
shawn from CORTEZ, CO
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Removed ice bucket from freezer. Remove ice. Remove 2 phillips head screws from the inside front of ice bucket, and 2 fromt the bottom front to remove the front cover. Remove the E clip and washer from ice crusher shaft. Remove 4, 1/4” head screws from ice crusher housing. Unclip the selector shaft from crusher door paying attention to p
... Read more
osition.Slide housing off of shaft and discard. Install new housing over shaft and install the 4 screws. Install selector shaft into door. Install the E clip and washer onto shaft. Install front housing with the 4 screws previously removed. Refill bucket with ice and install bucket back into freezing taking care to orient the ice screw shaft into the cog in the back of the freezer as well as the door selection shaft. Test operation.
Read less
Was this helpful?
Thank you for voting!
Condenser motor burned out
2 of 2 people
found this instruction helpful.
-
Bill from STERLING, VA
- Easy
- 30 - 60 mins
-
Nutdriver, Socket set
I followed the instructions on your website, made it a simple as possible. Very tight work area sometimes fingers only, but a little patience works.
Saved at least $300. By not paying a repair person.
Saved at least $300. By not paying a repair person.
Was this helpful?
Thank you for voting!
Ice Crusher Houseing cracked broke into pieces
2 of 2 people
found this instruction helpful.
-
Curtis from ROCK HILL, SC
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Remove ice drawer ,Removed front of drawer 4 screws ,Removed broken crusher 3 screws Ordered new parts reassembled replaced fix blade spacer that was broken and blade cover housing reattached front of drawer !
Other Parts Used:
Was this helpful?
Thank you for voting!
Part 30 on the Ice and water dispenser drawing was broken and needed to be replaced in order to seal the ice chute opening into the freezer.
2 of 2 people
found this instruction helpful.
-
Jon from SEBRING, FL
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Followed the video for this repair. Only issue was that the videos showed that when the front panel is removed, there is a wire harness that has to be unplugged from part No. 38c. This was not the case. What I had was a Ribbon Cable Harness that plugged into the front of part No. 38 and the top of part 38C (the two power boards) I tried
... Read more
to disconnect it from part 38C by pulling it out, and apparently damaged the Ribbon Cable Harness. Later found a video showing how to remove this item properly when replacing power boards 38 and 38C. Have ordered a new cable from GRP and hopefully this will solve the problem, as there is no electrical current to the dispenser controls and the ice and water dispenser are not currently working. Would have been nice to know that there are two types of connections between these power boards; a cable harness that unplugs from 38C or a Ribbon Cable Harness that unplugs from from the face of part No. 38. Hopefully I have not damaged either of the boards or anything else. Professional repair man coming on Thursday to test the boards, micro switches, etc. The boards are quite pricey, ($550.00 for both) and since the refrigerator was manufactured in 2004, we will buy a new one before we pump any more into this older unit. Very important to know how to unplug this Ribbon Cable Harness from the boards before proceeding ! Plug in on 38C is very tricky and you will need to review a video showing how it is done.
Read less
Was this helpful?
Thank you for voting!
ice dispenser did not work
3 of 5 people
found this instruction helpful.
-
gilbert from helotes, TX
- Really Easy
- Less than 15 mins
i ordered a replacement, and when it came in i took the old part off and installed the new dispenser. it works great.
Was this helpful?
Thank you for voting!
Broke glass fridge shelf/insert while cleaning it...
4 of 8 people
found this instruction helpful.
-
Jennifer from Burnsville, MN
- Really Easy
- Less than 15 mins
There was no repair needed. I broke the glass shelf that inserts to a plastic frame that holds the fruit/veggie drawer on the fridge.
I found the part very easily on the site and ordered it. The part came exactly as described on the Web site.
I found the part very easily on the site and ordered it. The part came exactly as described on the Web site.
Was this helpful?
Thank you for voting!
Crisper bin track support
2 of 2 people
found this instruction helpful.
-
Ruth from Lake Forest, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
The part arrived in about 2 days! The right side support that is attached to the inside wall of the refridgerator, that holds the crisper guide, broke apart and would not support the crisper. We took everything off of that shelf and took out the crisper and the glass that is on the shelf. We then carefully pried the support from the in
... Read more
terior wall (it was a slow tedious move to be sure we did not damage the wall of the fridge). We made sure all of the pieces were out and snapped the new one into place. For some reason the old one did not want to come out. It broke into many pieces and we carefully pulled all of the little pieces out of the notches
Read less
Was this helpful?
Thank you for voting!
Ice Maker Stopped Making Ice
3 of 5 people
found this instruction helpful.
-
PERRY from LOWER BURRELL, PA
- Easy
- Less than 15 mins
-
Nutdriver
Removed power , unplugged wires and 2 screws then reversed the process 1 hour later first batch of cubes dropped into bin
Was this helpful?
Thank you for voting!
original broke
2 of 2 people
found this instruction helpful.
-
David from Lake Charles, LA
- Really Easy
- Less than 15 mins
New part fit nicely in an instant. Only issue is that it is a white replacement part and ours was clear...not a big deal because this is the bottom drawer so you really don't even notice.
Was this helpful?
Thank you for voting!
Ice maker doesn’t work
2 of 2 people
found this instruction helpful.
-
Ville from SAN JOSE, CA
- Really Easy
- Less than 15 mins
Open freezer
Pry the switch out (bottom first, then push the tab on top while prying out)
Move wires to
New switch
Push switch in
Test
Pry the switch out (bottom first, then push the tab on top while prying out)
Move wires to
New switch
Push switch in
Test
Was this helpful?
Thank you for voting!
Feed wheel broke and ordered the whole assembly working fine so far
2 of 2 people
found this instruction helpful.
-
Richard from BAXLEY, GA
- Very Easy
- Less than 15 mins
Took out the out one and slid in the new one so easy to do
Was this helpful?
Thank you for voting!
Icemaker jammed
2 of 2 people
found this instruction helpful.
-
Bill from FORT MYERS, FL
- Very Easy
- Less than 15 mins
Installed new Auger drawer assembly
Was this helpful?
Thank you for voting!