3334 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
plastic door holder broken
4 of 5 people
found this instruction helpful.
-
Bill from Lady LAke, FL
- Really Easy
- Less than 15 mins
-
Screw drivers, Socket set
took the screw out of the white flange on the top of the door that attaches to the top of the refrigerator. Then removed the cover , and the two screws attached to the refrigerator top. Then lifted off the door removed the bottom plate that is holding the plastic door holder. and replaced the broken part and replaced the bottom plat
... Read more
e , set the door back on the hinge and installed the top two screws and the flange cover and the last screw holding the flange cover in place. It actually took longer to type this than the repair
Read less
Was this helpful?
Thank you for voting!
broken glass
4 of 5 people
found this instruction helpful.
-
marisa from pearland, TX
- Really Easy
- Less than 15 mins
I was really impressed with how easy it was to navigate through your website and found the exact part I needed. I immediately received my glass shelf it took all of 2 seconds.
Was this helpful?
Thank you for voting!
Ice Maker ffss2614qpo
4 of 5 people
found this instruction helpful.
-
Dante from SOUTHOLD, NY
- Really Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
Looked it up on how to, follow the video
. Very easy 1-2-3 it was out and new one in..........??.
. Very easy 1-2-3 it was out and new one in..........??.
Was this helpful?
Thank you for voting!
Every thing went smooth
4 of 5 people
found this instruction helpful.
-
Micu from MOJAVE, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
But I have back ground mechanical skills, I did see the video one time, and everything went smooth......
Was this helpful?
Thank you for voting!
Rust on Front Plate and Drive Blade
6 of 11 people
found this instruction helpful.
-
Wayne from Westford, MA
- A Bit Difficult
- 1- 2 hours
-
Nutdriver, Pliers, Screw drivers
Downloaded a schematic of the ice container. Disassembled the ice container, keeping track of which different type of screws went where. Followed the schematic to ensure proper sequence of blades and spacers. Manually rotated unit prior to installing into the freezer in case of binding. Finished.
Other Parts Used:
Was this helpful?
Thank you for voting!
ice maker wouldn; dinspense ice'
3 of 3 people
found this instruction helpful.
-
Charles from JACKSONVILLE, FL
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers
removed ice denspenser and replaced spring and flap'
Other Parts Used:
Was this helpful?
Thank you for voting!
Ice maker stopped making ice.
4 of 6 people
found this instruction helpful.
-
Thomas from WESTAMPTON, NJ
- Really Easy
- 30 - 60 mins
-
Nutdriver
The repair was fast and easy .I removed the ice tray , disconnected the wiring connector and lossend two screws. I removed ice maker assy.and repeated in reverse order to install. I also installed a new water filter. I had ice in about 20 minutes.
Was this helpful?
Thank you for voting!
the water actuator broke off
3 of 3 people
found this instruction helpful.
-
Sean from Oneonta, NY
- Easy
- 15 - 30 mins
-
Screw drivers
it's very simple......take off the bottom plastic grate that catches the overspilled water, unscrew the 3 bottom screws, take off the black plate ( just lift up slightly), take out three more screws, then get the flashlight out. ......on top of the actuator, you will see 2 small silver-colored screws with very small silver-colored plates
... Read more
( maybe 1/4 inch long), they hold the actuator into the unit. unscrew those and pull out the old actuator unit. You'll need to use your flashlight and pull the entire unit out to get access for replacment. Reverse the process for replacement, put in the actuator, screw in the 2 small silver-colored screws and there little plates, push the entire unti back into place, then screw in the remaining two sets of 3 screws......replace the faceplate and water grate and you're done.
Read less
Was this helpful?
Thank you for voting!
Broken Drum
3 of 3 people
found this instruction helpful.
-
Jubal from OZARK, AL
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Had to disassemble the entire ice maker bucket. Simple and straightforward, didn't need any pictures or reference materials. Just time consuming.
Was this helpful?
Thank you for voting!
Ice maker quit working
4 of 6 people
found this instruction helpful.
-
Gary from Granbury, TX
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Pliers
Remove ice pan below ice maker. Got mirrow verifed the type of screws. Obtained nut driver and felt it at right angle remove screws only have way. The ice maker lifts up and off. Took needle nose pliers to grip and remove electrical connection plug. The instruction and picture sent was no help the picture were the size of a thumb nail no
... Read more
detail could be determine. I installed the adapter plug and all the extra length wiring was the most difficult to type wrap with both hands extended out in front. I finally wrestled it in on to the two screws unscrewed from the wall about 1/2". Keep the ice maker water lever up and ensure it aligns to the water trough inlet. Works Great.
glg
glg
Read less
Was this helpful?
Thank you for voting!
Drive great stripped for ice eject. Heater bad
4 of 6 people
found this instruction helpful.
-
Danny from PUEBLO, CO
- Really Easy
- Less than 15 mins
-
Nutdriver
Loosened the 2 bolts 4 turns where it mounts inside the freezer. Lift maker off the bolts unplug 1 plug. Reverse to install.
Was this helpful?
Thank you for voting!
Ice maker leaking, then would'nt shut off.
3 of 3 people
found this instruction helpful.
-
Terry from KEYSTONE, IN
- Very Easy
- Less than 15 mins
-
Nutdriver
Ice maker is held by 2 screws just above the unit, on the wall of the refrigerator. You can't see the screws, so borrow your wife's makeup mirror. Shine a light into the refrigerator, and using the mirror, locate the two screws, holding the unit in place, on the wall of the refrigerator. Using a nut driver, or socket wrench, with a 1/4 in
... Read more
socket, loosen up the two screws, but don't remove them. Bump the unit upwards, and away from the screws. (BEFORE doing anything!! Shut off the water supply, unplug the refrigerator) When you get the unit freed up, just unplug the old unit, and install the new one. You don't even have to worry about the water lines, and you'll see why, when you get the old unit off. Just reverse the procedure, installing the new unit. Very Simple, 10 to 15 minutes tops.
Read less
Was this helpful?
Thank you for voting!
Ice maker stopped working. Part needed to repair it no longer available so had to replace the whole icemaker.
4 of 7 people
found this instruction helpful.
-
Edward from GROTON, CT
- Very Easy
- Less than 15 mins
-
Nutdriver
Loosened the two mounting screws (no need to remove them), lift off the icemaker and unplug it. Reverse the order and done.
Was this helpful?
Thank you for voting!
Ice maker would dump ice one time and then stop. Turning the ice maker off for a minute and back on would repeat the process.
3 of 4 people
found this instruction helpful.
-
James from KNOXVILLE, TN
- Very Easy
- Less than 15 mins
-
Screw drivers
I removed the two side mount screws with a screwdriver and disconnected the electrical plug to the ice maker to remove it. I reversed the process to install the new one.
It was the thermostat that was the problem, but I chose to replace the entire ice maker for only $25 more.
It was the thermostat that was the problem, but I chose to replace the entire ice maker for only $25 more.
Was this helpful?
Thank you for voting!
Broken refrig door shelt bin
3 of 4 people
found this instruction helpful.
-
Kathleen from Kenosha, WI
- Really Easy
- Less than 15 mins
Put on new shelf in seconds. What a wonderful way to be able to purchase the perfect part easily through the internet. I ordered the part on Sunday and received it on Tuesday. THANK YOU Parts Select!!! K.F.
Was this helpful?
Thank you for voting!