3334 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Twice I ordered the oven light bulb & each time the light bulb was defected
18 of 38 people
found this instruction helpful.
-
Barbara from BELLEVUE, WA
- Very Difficult
- Less than 15 mins
I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl
... Read more
iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance
Read less
Was this helpful?
Thank you for voting!
plastic closer plate broken
8 of 9 people
found this instruction helpful.
-
Sandra from Alto, NM
- Easy
- 15 - 30 mins
First removed food from the refrigerator door.
Second removed plastic cover plate and metal plate assembly from top of door.
Third lifted door of metal pin on bottom.
Fourth removed broken closer plate and replaced
with new closer plate.
Set door back in place.
Re secured the met ... Read more al plate and plastic cover plate.
Replaced the door shelves and food. DONE.
Second removed plastic cover plate and metal plate assembly from top of door.
Third lifted door of metal pin on bottom.
Fourth removed broken closer plate and replaced
with new closer plate.
Set door back in place.
Re secured the met ... Read more al plate and plastic cover plate.
Replaced the door shelves and food. DONE.
Read less
Was this helpful?
Thank you for voting!
Ice Would Not Dispence
17 of 36 people
found this instruction helpful.
-
Jerry Baten from Pampa, TX
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Took the ice storage bin out. Took the unit apart,and disamble the augar unit. Ordered parts from manufacture, which arrived in two days. As soon as I got the parts, I reassambled it. Work perfect. Good job!
Other Parts Used:
Was this helpful?
Thank you for voting!
The drum ice maker broke in half so it couldn't dependent the ice.
8 of 9 people
found this instruction helpful.
-
ROWENA from WIGGINS, MS
- Really Easy
- 30 - 60 mins
-
Screw drivers, Socket set
I had removed the housing that the drum was in and taken the screws out to get to the broken drum. I removed it there was a set of 6 blades that crushed the ice that had to go back on the same order when I removed these I put them on a piece of wire in the order they came off (so I would get them back I the correct order). Then I reversed
... Read more
the order and reassembled it in the opposite direction . It was fairly easy to do. I'm a 68 year old disabled woman so if I could do it I'm sure you could to. Good luck. It cost me $14.00 if I had bought the whole assembly it would have been $150.00. So it was well worth my time and effort.
Read less
Was this helpful?
Thank you for voting!
ice maker quit making ice
8 of 10 people
found this instruction helpful.
-
Barry from Middletown, DE
- Easy
- 15 - 30 mins
-
Screw drivers
I basically followed the instructions offered when i searched for the ice maker. It was relatively easy to do, I undid the 2 screws holding the ice maker to the side of the freezer, the was the tricky part, holding a mirror so i could see the slots of the screws. loosened them, disconnected the electrical connection and reversed the proce
... Read more
ss for the install. It took about 25 minutes and i was back making ice.
Read less
Was this helpful?
Thank you for voting!
The basket hanger is plastic and the rack tips of the basket hanger are even more delicate. Replaced basmet hanger no problem. They were expensive i.e. $70.
8 of 10 people
found this instruction helpful.
-
Isaac from WARFIELD, VA
- Very Easy
- Less than 15 mins
-
Nutdriver
Unscrew 4 screws . Remove broken basket hangers. Install new basketo hangers. Screw in 4 retaining screws...
Other Parts Used:
Was this helpful?
Thank you for voting!
Ice dispensers (cube or crush) stopped working, plastic auger drive separated from auger shaft. Would run but not dispense ice.
7 of 7 people
found this instruction helpful.
-
BRIAN from OXFORD, NY
- Very Easy
- Less than 15 mins
Watched repair video on plastic auger repair and decided to just invest in the whole replacement unit. 45 minute vs. a 5 minute repair.....no brainer. Removed shipping materials from new dispenser, placed on counter top. Removed old ice dispenser, dumped existing ice into new dispenser. Installed new dispenser with ice back into freezer.
... Read more
Tested and unit now dispenses ice.. Easiest fix I've done to date.
Read less
Was this helpful?
Thank you for voting!
Broken Shelf
8 of 11 people
found this instruction helpful.
-
kevin from erie, PA
- Really Easy
- Less than 15 mins
Slid the shelf in place!
Was this helpful?
Thank you for voting!
Bearing broke
7 of 8 people
found this instruction helpful.
-
Walter from Hamilton, OH
- Really Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Took off Door on Refr. and unscrewed Doorstop,
removed doorstop with broken Bearing and replaced with new Parts. Took about 20 Minutes
including reattaching Door. A 10 year old can do it.
removed doorstop with broken Bearing and replaced with new Parts. Took about 20 Minutes
including reattaching Door. A 10 year old can do it.
Was this helpful?
Thank you for voting!
I broke the lever that you npush to get water.
7 of 8 people
found this instruction helpful.
-
Darryl from Sciotoville, OH
- Really Easy
- 15 - 30 mins
-
Screw drivers
At first glance I didn't see the screws that would permit me to get to the actuator but I lifted the small tray at the bottom and there were two screws. Everything went easily.
Was this helpful?
Thank you for voting!
Icemaker not pushing out ice
7 of 8 people
found this instruction helpful.
-
Andrew from SALEM, MA
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
Consult the exploded view of the Ice Container on this site. A likely cause the end plate (17) is worn. This plate connects the rotating corkscrew to the final plastic worm that pushes the ice into the crusher and thence to your waiting glass. The worm alone will not do the trick. To replace this plate, you need to take out all o
... Read more
f the screws you can see, including the one that holds the spring for the crusher select bar.. First, the front cover, then the plate, and finally, locking ring from the worm and the black housing for the crusher. Now you can remove the whole worm assembly. Using a cloth or rubber insulator to protect it, unscrew the end screw and slide off the crusher teeth. Store on the table as a unit to facilitate re-assembly. Slide off the old bar and worm, put them back, and re-assemble. Takes a little dexterity to get the crusher select bar back, but not hard. Easy job.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Lightning struct the house and fried the evap thermostat
8 of 11 people
found this instruction helpful.
-
charles from parker, CO
- A Bit Difficult
- More than 2 hours
-
Nutdriver, Screw drivers, Socket set
Noticed the evap fan wasn't working, so trying to disconnect the wire broke the connection so had to order a new motor. Installed the motor but it still didn't work. Had a technician look at it and he said it was the control board. Ordered and installed control board and still didn't work. The only element left is the evap thermostat.
... Read more
Jumped the thermostat and it worked so ordered and installed a thermostat. It works now
Read less
Was this helpful?
Thank you for voting!
Freezer compartment warm / Ice cream soft
9 of 15 people
found this instruction helpful.
-
George from McBee, SC
- Really Easy
- 15 - 30 mins
-
Nutdriver, Socket set
I worked for GM as a Frigidaire Tech, before starting my own business. I have retired now.
I took the three screws off the back of the bracket holding the motor. Disconected wire harness and pulled out the motor. Reverse to install. [email protected]
I took the three screws off the back of the bracket holding the motor. Disconected wire harness and pulled out the motor. Reverse to install. [email protected]
Was this helpful?
Thank you for voting!
Original Ice Maker quit working.
6 of 6 people
found this instruction helpful.
-
Gary from Azle, TX
- Really Easy
- 30 - 60 mins
-
Nutdriver
Loosened the 2 screws a little so that it would slide up and off then unplugged the wire harness.
Installed the new one in reverse order and works like a champ.
Installed the new one in reverse order and works like a champ.
Was this helpful?
Thank you for voting!
my old ice maker leaked at the bottom
7 of 9 people
found this instruction helpful.
-
harry from terre haute, IN
- Really Easy
- Less than 15 mins
-
Nutdriver
it was really easy changing the ice maker. the only trouble i had was the wiring. it was very stiff and hard to route. it did not work at first but that was my fault did not have the connector plugged in all the way.since then it works great.
Was this helpful?
Thank you for voting!