EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3334 - Instructions

All Instructions for the 3334
31 - 45 of 396

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
ice maker would not make ice
16 of 22 people found this instruction helpful.
  • paul from traer, IA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
un plug fridge. removed ice maker from fridge. loosen 2 mounting screws. lift unit in slots to get over heads of screws. unplug wire harness. remove cover. remove 3 screws from control housing. remove 2 motor mounting screws. unplug motor wires from switches w/needle nose. installation is the reverse. plug in fridge turn on icemaker. ta kes 10 to 15 min to start to cycle.
easy and cheaper than new fridge or ice maker
Was this helpful?
Thank you for voting!
Original gate broke at the swivel point
15 of 19 people found this instruction helpful.
  • Charles from New Orleans, LA
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers, Socket set
I removed the old gate by using a flat head screw driver to pry open mouth. I then removed 2 bolts that held on the cage that hols the ice crushing blades. Then I inserted the new gate and used a screw driver to pry the mouth open again (it was more difficult to insert than remove). I then popped in the new gate and re-assembled the cage. It worked on the first shot with no problems!

This is the 3rd time I have attemped and successfully repaired major home appliances myself after the warrenty ran out. I'm sure I could buy a new appliance for the money I saved.
Was this helpful?
Thank you for voting!
water actuater arm broke at bend.
13 of 15 people found this instruction helpful.
  • carlos from new bern, NC
  • Easy
  • Less than 15 mins
  • Screw drivers
Very easy. I at first misunderstood the instructions. the fridge door remains closed. You pull out the water catch tray "outside" the door. someone said ice tray, thats why i thought i had to open the door to fix it. there are 3 screws that the water catch hides. once removed the control panel comes off which unplugs from bottom easily. then there are screws behind the control panel just removed. after those are unscrewed the rest tilts enough that u can uncrew the little metal bands that hold the arm. replace arm & reverse your efforts & your done. took less then 10 minutes.
Was this helpful?
Thank you for voting!
Fan motor no longer functioning and needed to be replaced
12 of 12 people found this instruction helpful.
  • Amber from SHERMANS DALE, PA
  • Very Difficult
  • 1- 2 hours
  • Nutdriver, Pliers, Socket set
The most difficult part was the removal of the existing fan and shroud. There is very little room to work between the condenser and the coils where the fan is located. The old shroud had to be removed as it was not compatible with the mounting for the new fan motor and blade. Make sure to unplug the refrigerator and give the coils some time to cool down. The first step was to remove the old fan blade... it simply pulls off. Next you need to remove the two bolts holding the fan shroud to the floor of the refrigerator. Then you need to remove the old fan motor from the shroud... unplug the wire connection and remove two small bolts that hold it on. I was lucky to have a VERY small ratchet to get into these tight spaces. Now is the really hard part, removing the metal fan shroud takes a lot of twisting and turning to get it out. The coils have a little play in them, but you must be very careful of the tubing and connections. Also, the coils are very sharp. Once this is out, IF you can get it out....I had my doubts along the way, you can start to put the new parts in... beginning with the new fan shroud which fortunately is made of plastic and has some give which makes it easier to get in. Then you can mount the new motor to the shroud with the three new screws. Plug in the wire connection, add the foam tape to the shroud and mount the shroud to the floor of the frig with the original two bolts. Lastly, attach the fan blade. This replacement kit is well constructed, fits perfectly and contained all the necessary parts (fan motor with wiring connection, mounting screws, wire connection adapter, fan shroud, foam tape and fan blade), but no detailed instructions come with it. I was lucky to get the old fan shroud out without doing any damage to the surrounding parts, but this part was very difficult for a do it yourself person. I would be interested to know if a professional has some other tips for this part of the replacement process.
Was this helpful?
Thank you for voting!
Replacing Icemaker
12 of 12 people found this instruction helpful.
  • Richard Allen from PHOENIX, AZ
  • Really Easy
  • 30 - 60 mins
  • Socket set
Pull refrigerator from wall and disconnect the water line and unplug the power.

On top of the icemaker, two machine screws hold the icemaker to the side of the refrigerator. You will have to feel around to find the machine screws, but once you do, it is simple to slip the appropriate size socket over the hex heads. I found it helpful to have an extension on the socket wrench. Disconnect the power cable inside the refrigerator (there are little pressure clips on the side that help release the cable) and move it out of the way for the time-being.

Back out both machine screws several turns, but do not remove them completely. The icemaker slips over the screws, so leaving them in the side of the refrigerator makes that process a lot easier. Hand tighten the machine screws once you have positioned the new icemaker in place. One thing to be sure and do is make sure the water line hose coming out of the back of the refrigerator inside is on top of the icemaker. It fits into a slot in the top of the icemaker - failing to do this will result in water pouring into the freezer compartment, not into the icemaker..

Reconnect the power cable to the new icemaker and tuck it up behind the icemaker assembly. Tighten the machine screws completely, but do not over-tighten.

Reconnect the water line on the back of the refrigerator at the wall, and plug in the refrigerator. You should hear the unit fill immediately.

In about an hour you should have ice filling the bin. Enjoy!
Was this helpful?
Thank you for voting!
Ice maker failed
11 of 13 people found this instruction helpful.
  • Mary from SOUTH LYON, MI
  • Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.
Was this helpful?
Thank you for voting!
Interior light needed replaced
22 of 46 people found this instruction helpful.
  • Leo from TWIN FALLS, ID
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.
Was this helpful?
Thank you for voting!
housing-crusher was broken
12 of 16 people found this instruction helpful.
  • Bob from Milton, WV
  • Easy
  • 15 - 30 mins
  • Screw drivers
removed ice maker box and disassembled crusher unit on front of box and installed new housing.
Was this helpful?
Thank you for voting!
The module cover was broken when it was removed improperly
12 of 16 people found this instruction helpful.
  • Wendy from Columbus, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
I simply unscrewed the original and replaced it with the replacement. It was very easy. I did have to order the label as the original one would not come off to be re-used. Hopefully, that will go on easily as well.
Was this helpful?
Thank you for voting!
Food compartment not cooling, freezer working well.
13 of 19 people found this instruction helpful.
  • Mary from Kenmore, WA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Fantastic!
Sent in a brief description of problem and model number. Reply and description of other customers experiences guided us to the exact problem.
We ordered the part on Friday and it was here on Tuesday.
I prepared the freezer compartment for the removal of the old motor and on Sunday husband installed new Evaporato r Fan Motor.

It works and is cooling like it did when it was new.

This has been a great experience as all repairmen wanted at least 60.00 to just come out and determine what the problem was. I can only imagine what the final bill would have been.

This was easy and inexpensive.

Thanks for all the help.
Was this helpful?
Thank you for voting!
Right door makes loud poping sound when open and close
12 of 16 people found this instruction helpful.
  • HUNG from CARSON, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I followed step by step instruction in the hinge kit; Replacing the old hinge with a new hinge and two new plastic cams in the kit. The kit hinge has an adjustment to level the right door with the left door. Everything is done in 20 minutes for a senior guy like me. Very easy.
Was this helpful?
Thank you for voting!
ice crusher blades not working
11 of 14 people found this instruction helpful.
  • Rebecca from Athens, AL
  • Really Easy
  • Less than 15 mins
got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!
Was this helpful?
Thank you for voting!
There was a hole in the plastic bin where ice fell through to the freezer.
9 of 9 people found this instruction helpful.
  • Thomas from Niceville, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refr igerator.
It took me about 5 to 10 minutes. It's really easy!
Was this helpful?
Thank you for voting!
Rust had corroded Front Plate and Drive Blade
11 of 15 people found this instruction helpful.
  • Calvin from Massillon, OH
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
Was this helpful?
Thank you for voting!
Ice maker was not making ice
9 of 10 people found this instruction helpful.
  • Jeffrey from Indianapolis, IN
  • Easy
  • Less than 15 mins
  • Nutdriver
I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAI T OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!
Was this helpful?
Thank you for voting!
All Instructions for the 3334
31 - 45 of 396