EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3334 - Instructions

All Instructions for the 3334
16 - 30 of 396

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old icemaker would not cycle to make ice.
24 of 26 people found this instruction helpful.
  • David from Cedar City, UT
  • Easy
  • 15 - 30 mins
  • Nutdriver
I had already removed the ice maker by loosening the two screws with a 1/4" nut driver, in order to compare the design and style to the intended replacement for size and critical measurements. The replacement was almost identical. The wiring harness was 2-3" longer than the original, but after snaping the wire plugs together I simply cur ved the wire up and to the left to be out of the way. The hanging brackets are slotted and it was easiest to slip the back hanger over the head of the screw and let it slip down, then the front hanger was already to line up even though you can't see the screw with the ice maker in the way. I had to transfer an L-shaped metal bracket to the bottom side, matching the old assembly, and adjusting it to hold the bottom side away from the freezer compartment a little so it would hang level and secure. You have to snug the two screws with a screw driver or 1/4" nut driver by feel, since you can't see them with the icemaker in place. It took about 10 minutes to take out the old and another 10 to put in the new. We now have a full bin of ice, and the old plastic trays have been retired. I should have done this a year ago.
Was this helpful?
Thank you for voting!
The ice chute door didn't close all the timed
39 of 73 people found this instruction helpful.
  • Shelby from Clinton, IL
  • Easy
  • 30 - 60 mins
  • Screw drivers
The door has nylon gear teeth that wore out and needed replaced. The ice chute came off very easy with 6 screws. I used a punch and pliers to remove the hinge pin. Then the door came off and the new one put on. Very easy. The part was ordered on Sunday and arrived on Tuesday.
Was this helpful?
Thank you for voting!
Freezer worked great, refrigerator would not cool
21 of 25 people found this instruction helpful.
  • Farrell from Atchison, KS
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
Removed (unsnapped) plastic cover from back of refrigerator ( inside freezer compartment), determined that the fan was not turning, removed 4 screws from the aluminum back plate in freezer and tilted it down. Removed 2 screws with a nut driver, this allowed the fan to be removed, unpluged fan motor from the bace of the freezer and removed fan. Installed new motor and spent $38.00 to repair the refrigerator that would have cost me severial hundred dollars to replace. Thanks for the help
Was this helpful?
Thank you for voting!
The bottom of Refrigerator would not get below 48 degress. Freeezer was working fine.
25 of 38 people found this instruction helpful.
  • Jeffrey from Bridgeville, PA
  • Easy
  • 15 - 30 mins
  • Socket set
First I unplugged fridge. I then removed cover that keeps fan protected. I then removed 2 screws that hold the evaporator motor in place. I then removed 3 wires running to motor. Very easy to remove, just pulled connections apart. I then replace the old motor with new.

The Sears repairman wanted to charge me $359 to repair. I did repair for under $40! Amazing what you can save if you have the time and knowlege to do it yourself.
Was this helpful?
Thank you for voting!
Water in the ice bin freezing all the existing ice into clumps
20 of 23 people found this instruction helpful.
  • John from Mount Royal, NJ
  • Easy
  • 15 - 30 mins
  • Nutdriver
You have to blindly unscrew the two screws along the side of the ice maker. Once that is done simply remove the ice maker to the side to gain access to the electrical plug. Undo the plug and remove the ice maker completely. Install the adapter on the new ice maker and install it in much the same way you removed the old. I started the (2) 1/4" screws before installing the new ice maker to make it easier to hang. Pay careful attention to the wire harness and dress it out of the way. Finally tighten the two screws and make sure the bail wire is down to begin ice making once again.
Was this helpful?
Thank you for voting!
No air flow in freezer or fridge
21 of 26 people found this instruction helpful.
  • Jim from Au Sable Forks, NY
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Snap out fan cover, remove four 1/4" screws, remove back cover, remove defective fan motor, remove fan blade, install new motor and blade, strip wires and hook up with wire nuts, reinstall back cover, snap in fan cover, and plug in fridge.
Was this helpful?
Thank you for voting!
Broken actuator-water
17 of 17 people found this instruction helpful.
  • Wesley from New Smyrna Beach, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers
Easy repair, except the re-install of the entire water/ice part back into the door. The original plastic water line too short to fit back into the small opening. Hint: Go buy 10 inch of new water line and a small connector. Run the new line up through the small opening, and connect to the original water line with the small connector . This made it easy to replace and test, and then cut of the excess water line.
Thanks.
Was this helpful?
Thank you for voting!
Freezer is working but not the refrigerator.
17 of 19 people found this instruction helpful.
  • Neptali from Groton, MA
  • Really Easy
  • 15 - 30 mins
  • Wrench set
Removed the cover inside the freezer. Found out that the motor/fan was not working. Ordered through PartSelect. Got the parts in 3 days. Installed it for less than 30 minutes. Very easy. It saved me hundreds of dollars. We considered buying a new fridge but not anymore. , it only cost me $70 including shipment charges. (Make sure you unp lug the appliance first before opening the cover. Remember safety first.)
Was this helpful?
Thank you for voting!
Ice make just stopped
16 of 16 people found this instruction helpful.
  • David from Beavercreek, OH
  • Easy
  • 15 - 30 mins
  • Screw drivers
I want to first say that before I ordered this part from "Part Select" I first went and talked with a local appliance repair shop. They quoted me a $120 charge to come out and check the problem. Then $30 and hour service fee, plus parts. He provided me a quote of about $250 for the job.
I found this part easily on the web site $77. It was very easy to instal. The only problem I had was the fact that in the side by side it was very difficult for me to get two hands inside the freezer to install it. (I have wide shoulders). Two screws loosened, no need to remove them. Just life the entire unit straight up. Unplug wire harness. Then just reverse order. Could not be easier. If you can change a light bulb you can do this.
Was this helpful?
Thank you for voting!
Ice Would Not Work - But Water Disp Did
17 of 19 people found this instruction helpful.
  • JAMES from HENDERSON, NV
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Shut off water/power - pulled tray -loosened two screws holding ice maker - lifted it up and off - unhooked power connection installed new maker in reverse of above - power supply line was much to long but just pushed it under the ice tray ( away from the maker ) prior to ordering looked at comments from others regarding installation
Was this helpful?
Thank you for voting!
Our Ice Maker drove us nuts with noise from cubes getting stuck.
17 of 19 people found this instruction helpful.
  • Dee from Central Point, OR
  • A Bit Difficult
  • Less than 15 mins
  • Socket set
I purchased the replacement part (no instructions sheet) from another company, not this one, that cost 2X's a much as this company. So I sent it back and ordered from this company. Got it faster then the post office sends us the stamps we order by internet and this ice maker had instructions.
Our's is a side by side refrig, so workin g space is limited but do-able. The old ice maker has made a clicking noise for years while trying to push the cubes out of the tray. They would get stuck and refreeze, sticking half way out of the tray.
I loosened the 2 screws with a socket driver (which are difficult to see), raised the unit up and off the screws. Unplugged the power & out it came. Removed the bracket on the side as instructed to attach to the new ice maker and in the trash the ol' ice maker went. Set the new ice maker on the screws, plugged in the power, tightened the screws and walla. A quiet ice maker. In fact, it would startle us the first day as we didn't hear the clicking noise indicating it was stuck. All of a sudden the cubes just dropped into the container. Alright! Don't know why I didn't do this years ago.
Was this helpful?
Thank you for voting!
Ice maker burned out
17 of 21 people found this instruction helpful.
  • John from Alexandria, VA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Removing the old unit was easy enough, just loosened two screws that attach unit to side of freezer and disconnected the wiring harness. But the new unit never goes in quite as easily because it's always just a little different from the original. In this case, the wiring ended up being about six inches longer and the excess had to be st uffed behind a shield at the rear of the unit. Theoretically, the wire could have been pushed back through the opening, but it got jammed and wouldn't go. I had to remove side rails and pry the shield forward in order to get the wiring back out of the way. The unit is a narrow side by side, so there wasn't a lot of room to move around. But it wasn't difficult, just tedious. I had to make sure the wiring did not come into contact with the heating element at the bottom of the icemaker. Once installed it worked great.
Was this helpful?
Thank you for voting!
Replaced the heater-core motor
17 of 22 people found this instruction helpful.
  • John from Roanoke, VA
  • Easy
  • 15 - 30 mins
  • Socket set
It was fairly easy. Only had to remove the back cardboard. Remove 3 screws and the power plug.
Replacing the screws took a little time the motor mount didn't seem to be tapped exactly for the screws supplied and it was in a tight area. Its working great now.
Was this helpful?
Thank you for voting!
Ice maker quit working
16 of 20 people found this instruction helpful.
  • Steve from ORANGE, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Followed the steps in the video on your site, really easy to do.
Was this helpful?
Thank you for voting!
Crisper Supports broken
14 of 15 people found this instruction helpful.
  • GEORGE from ASHEVILLE, NC
  • Really Easy
  • Less than 15 mins
  • Wrench set
Removed supports with pliers and used center punch to push broken plugs out of hole and inserted the new supports.
Was this helpful?
Thank you for voting!
All Instructions for the 3334
16 - 30 of 396