EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3334 - Instructions

All Instructions for the 3334
91 - 105 of 396

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I had a broken door shelf
3 of 4 people found this instruction helpful.
  • Clarence from Oakland, CA
  • Really Easy
  • Less than 15 mins
It was very easy to insert the new shelf door into the refrigerator slots.
Was this helpful?
Thank you for voting!
Stopped making ice.
3 of 4 people found this instruction helpful.
  • WILLIAM from KERRVILLE, TX
  • A Bit Difficult
  • 15 - 30 mins
  • Nutdriver
Had to reach right hand to top of ice maker to locate hex head screws by feel, then place nut driver onto hex head by feel and then unloosen screws with lft hand ,a couple of turns, enough to lift ice maker off screws.
Replace new icemaker onto screws and tighten screws. The only problem incountered was the location and availabi lity of having to feel with both hands to fit nut driver onto the screws.(could not see with my eyes because front of ice maker blocked view. )
Was this helpful?
Thank you for voting!
No Ice !
3 of 4 people found this instruction helpful.
  • Kevin from Bridgewater, NJ
  • Easy
  • 15 - 30 mins
  • Nutdriver
Real simple repair..just backed off the two 1/4" hex bolts holding the ice maker to the wall of the fridge,(a little tricky since you can't see them),unclipped the electrical doo hickey. I re-clipped the electrical do hickey of the new ice maker, hung the ice maker on the bolts and then re-tightened them. However,still no ice,my problem w as the water valve on the back of the fridge behind the cardboard. Although it was still giving H2O thru the door it was not allowing water to flow to the ice maker. I reccommend pouring some water into the ice tray of the ice maker. If it makes ice and dumps it in to the holder, your ice maker is OK. If it turns out to be your water valve, that fix is easy as well. I HIGHLY reccommend watching the "fix it" video associated with that part. That repair also took less than 15 minutes. Good Luck! KC Bridgewater,NJ
Was this helpful?
Thank you for voting!
Water Actuator Broke Off
3 of 4 people found this instruction helpful.
  • Rodney from Ash Grove, MO
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I slid out the tray in the ice/water area and exposed the 3 screws to remove the unit/panel. I then had to unplug the electrical connection and work the panel around to where I could get to the 2 screws that hold the actuator in place. The water tube holds the panel tight making it difficult to access these two screws but I was able to complete the job in about 15 minutes.
Was this helpful?
Thank you for voting!
Easy
3 of 4 people found this instruction helpful.
  • eugene from BROOKLYN, NY
  • Really Easy
  • 30 - 60 mins
Easy
Was this helpful?
Thank you for voting!
Ice maker would not dischare ice
3 of 4 people found this instruction helpful.
  • DAVE from CRESTON, IA
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers
Followed the online video from this site
Was this helpful?
Thank you for voting!
The ice crushing housing was broken.
2 of 2 people found this instruction helpful.
  • Les from LIVERMORE, CA
  • Very Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
The repair went easily after watching the video, took me less than an hour to complete the repair.
Was this helpful?
Thank you for voting!
Dispenser Crusher Housing was broken
2 of 2 people found this instruction helpful.
  • Pete from THE PLAINS, OH
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
I followed the instructions, my ONLY issue was about the Part 46 the Ice Dispenser Actuator Rod. The front of the arm has flared out grooves and it didn't warn me about making sure the rod is properly aligned thru part 23 Front Plate or else when the ice maker actuates the rod it will not move properly if the grooves are not aligned on e ach side of the Front panel. I hope you can understand what I mean, if not just look at how the Part 46 rests in Part 23
Was this helpful?
Thank you for voting!
Fan was off kilter and began rubbing the frame which is caused it to slow down and make an disturbing audible noise.
2 of 2 people found this instruction helpful.
  • Martin from N HOLLYWOOD, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Before buying the part, I watched your video and realized it was extremely simple to remove and replace. Item was to take 7-10 days and I received it in 4. Took longer than 15 minutes because I had to move the fridge forward, get my tools and a vacuum, get a cup of coffee and get to it. Very easy and the video was exactly step by step. It took longer to vacuum all of the dust bunnies than to replace the part.

Honestly, I was in the market to buy a new refrigerator but now I believe I'll wait several more years. Thank you for your support.
Was this helpful?
Thank you for voting!
Door would not close properly.
2 of 2 people found this instruction helpful.
  • Brian from ROY, UT
  • Really Easy
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Remove the food items from the shelves on the door, Phillips screwdriver to take the top cap off. Adjustable wrench to take the two screws off the top hinge. Lift out the door and set aside. Remove two bolts from the lower hinge, reinstall with the new hinge and spacer. Reinstall door on lower hinge. Lift into place to reattach the upper hinge. Put the food back in and you're done.
Was this helpful?
Thank you for voting!
Lever to dispense water broke off
2 of 2 people found this instruction helpful.
  • William from Jim Thorpe, PA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Unplug refrigerator first. Remove 4 screws on front and lift off cover. Unplug unit small plug with around 6 wire on it on the top. Unscrew inside scres that hold the lever in place. Put the new one in slots and put in screws to hold in slot. Put cover back on. Make sure ice dispenser is still working seemed to disengage the unit du ring the repairs.
Was this helpful?
Thank you for voting!
Ice maker stopped working
2 of 2 people found this instruction helpful.
  • Joseph from Seal Beach, CA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
First I determined the icemaker was the problem when it was no longer calling for water. You can hear that "whistle" for 6-7 seconds when it calls for water. Anyway, replacement was a piece of cake, but did not entirely fix my problem. I also had to flush the lines to the soloniods that allow water to flow through the filter and into the water storage tank because it was cloggged with a little piece of plastic.
Was this helpful?
Thank you for voting!
ice maker quit working/and it was leaking
2 of 2 people found this instruction helpful.
  • KATHY from MURFREESBORO, TN
  • Very Easy
  • 15 - 30 mins
  • Nutdriver
BOUGHT NEW ICEMAKER TOOK TWO SCREWS OUT, UNPLUGGED THE ELECTRICAL CONNECTION. REMOVED OLD ICEMAKER, PUT TWO SCREWS BACK INTO REFRIGERATOR(DON'T SCREW ALL THE WAY IN AS THE NEW ICE MAKER WILL FIT ON. HOOK ELECTRICAL CONNECTION AND ADAPTER (THAT COMES WITH IT). PUT THE DRAIN TUBE IN ITS SPOT, HOOK ICE MAKER ONTO THE TWO SCREWS TIGHTEN EM DOWN. I DID THIS RIGHT BEFORE I WENT TO A BIRTHDAY DINNER WITH MY HUSBAND, WAS ALREADY DRESSED AND READY TO GO AND I TOLD HIM ILL PUT IT IN SO WE CAN HAVE ICE WHEN WE RETURN. ENDED UP BEING A SURPRISE PARTY FOR ME AND WHEN WE RETURNED WE HAD ICE. IT WAS SO EASY EVEN A GIRL CAN DO IT!!
Was this helpful?
Thank you for voting!
dood didn't close properly
2 of 2 people found this instruction helpful.
  • James from TUCSON, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
followed instructions on your video.. PERFECT and easy.
Was this helpful?
Thank you for voting!
Ice Director Door Broken In Half
2 of 2 people found this instruction helpful.
  • Cloid from HOOVER, AL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
I was able to replace the housing by only removing the front cover, the e-ring and washer and the 3 hex-head screws. I was able to work the old housing around to get the actuator arm off and then get it properly inserted into the new housing. Attach the new housing, IMPORTANT: make sure you get the fixed-blades and spacer assembly in the slot of the housing that holds them in place, replace the e-ring and washer, check that the actuator arm operates the door properly and replace the front cover. The videos can be helpful but these shortcuts will save some time.
Was this helpful?
Thank you for voting!
All Instructions for the 3334
91 - 105 of 396