EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3334 - Instructions

All Instructions for the 3334
121 - 135 of 396

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
lights blown out
6 of 14 people found this instruction helpful.
  • Gerald from WINTERVILLE, GA
  • Very Easy
  • Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Stopped crushing ice.
2 of 2 people found this instruction helpful.
  • Stacey from THE WOODLANDS, TX
  • Very Easy
  • Less than 15 mins
Wasn't sure what parts to replace so happy to find intact entire assembly. Popped out the old, popped in the new. Back in business in less than 5 mins. Highly recommend.
Was this helpful?
Thank you for voting!
Cracked shelf on inner door.
2 of 2 people found this instruction helpful.
  • Joan from Quechee, VT
  • Very Easy
  • Less than 15 mins
Replaced part and slid into place.
Was this helpful?
Thank you for voting!
Would not dispense ice.
2 of 2 people found this instruction helpful.
  • GEORGE C from Sweet Water, AL
  • Very Easy
  • Less than 15 mins
Very simple installation.Gentle pull out on the old Ice Container and Auger Assembly.Take the new Ice Container and Auger Assembly and slide in place.Make sure everything is lined up.
Was this helpful?
Thank you for voting!
Ice make would not dispense ice through the door
2 of 2 people found this instruction helpful.
  • Nancy from GLENDORA, CA
  • Very Easy
  • Less than 15 mins
Removed old ice maker , emptied ice into new ice maker and installed ice maker, it took less then 2 minutes to complete job and no tools needed , this was the easiest repair I have ever done.
Was this helpful?
Thank you for voting!
Ice maker not making Ice
2 of 3 people found this instruction helpful.
  • Colline from PENDLETON, OR
  • Very Easy
  • Less than 15 mins
  • Nutdriver
Unscrewed (loosen) screws lifted unit out unplugged electrical connection. plugged in unit hung on screws tightened screws and had ice in less then 1 hour. Rick
Was this helpful?
Thank you for voting!
would not despence ice
2 of 3 people found this instruction helpful.
  • bill from WESTCLIFFE, CO
  • Very Easy
  • Less than 15 mins
plug and play. removed old one, and install new one.
Was this helpful?
Thank you for voting!
Actuator got broken off
2 of 3 people found this instruction helpful.
  • Brian from St. George, UT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed water tray, removed 3 screws (a little rusted), took off cover, removed 3 more screws, unpluged wiring, removed screws holding in actuator, removed broken part, installed new part making sure spring was in the right place. Put back together.
Was this helpful?
Thank you for voting!
The center of the plastic auger drum was broken
2 of 3 people found this instruction helpful.
  • Laura from Westville, OK
  • Difficult
  • 30 - 60 mins
  • Screw drivers
Had to replace with a whole new part, had to take it all apart to replace
Was this helpful?
Thank you for voting!
Ice maker wasn't making ice
2 of 3 people found this instruction helpful.
  • Scott from Grayson, GA
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Occasionally, we'd get one batch of ice cubes and a frozen lake of water in the bottom of the ice tray.

The installation was easy and I won't bother duplicating the comments of others who have installed this part.

One word of caution: The ice maker contains a heating element on the bottom. That element is apparentl y live even when the ice bar is in the upper (off) position. When I unscrewed the old ice maker and went to lift it off the bolts, I severely burned my finger on the bottom of the old ice maker because apparently I started the repair in the middle of the heating cycle.

I highly recommend that you unplug the ice maker entirely before doing the replacement and gingerly ensure that the unit isn't hot before touching it. You'll save yourself a nasty burn.
Was this helpful?
Thank you for voting!
Broken water actuator
2 of 3 people found this instruction helpful.
  • Linda from Houston, TX
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
Followed others instructions on here. As others have said you do need a magnetized screwdriver or pick-up stick as it's easy to drop screws. A second person is useful to hold a flashlight and hold things steady.
Was this helpful?
Thank you for voting!
ice machine was now working correctly
2 of 3 people found this instruction helpful.
  • colleen from salt lake city, UT
  • A Bit Difficult
  • 30 - 60 mins
  • Socket set, Wrench (Adjustable)
watched the video (VERY helpful) and then removed the old icemaker and replaced it with the new one. Difficult only because of the small working space in the side by side freezer plus you can't see what you're doing when you tighten the screws. Working like a charm now.
Was this helpful?
Thank you for voting!
Every part of the ice crusher (blades and housing) bent/broke in successive failures
2 of 3 people found this instruction helpful.
  • Robert from INVER GROVE, MN
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
This was the last step of serial repairs to the ice crusher portion of the ice maker. I have practically replaced the entire assembly. All the blades were installed incorrectly (at factory? Afterwards?) and had bent. That caused problems for other parts. I hadn't noticed that the housing was weakened and my prior repair I did something du mb and the door on housing wasn't closing properly, so it snapped. I bought a new housing and installed it. My #1 tip is WATCH THE VIDEO! There are some things that have to be put together just so. You need things to line up and be under slight tension from springs. Last time I had it under too much tension. The door got in the way of the blades and broke. So this time I was more careful to do it correctly. Everything is working perfectly now. This design is clever, and I feel like I can diagnose and fix it again in future. "Steve's" instructional videos are a huge help. He shows exactly what to do.
Was this helpful?
Thank you for voting!
made lots of noise
2 of 3 people found this instruction helpful.
  • Kelly from GILBERT, AZ
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Loosen two screws, unplug power, lift it off, put new one on and make sure water chute is correct place, tighten screws!
Was this helpful?
Thank you for voting!
Ice maker stopped producing Ice.
2 of 3 people found this instruction helpful.
  • Fred from WAPAKONETA, OH
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
After determining the ice maker was getting water but not harvesting the ice, I ordered a replacement Ice Maker. Installation was easy. One electrical connection and two screws. Following the video to make sure I did not miss any steps I had ice in just a few hours. Just in time for a July heat wave!
Was this helpful?
Thank you for voting!
All Instructions for the 3334
121 - 135 of 396