3146 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light socket missing in refrigerator
1 of 4 people
found this instruction helpful.
-
Wayne from Issaquah, WA
- Really Easy
- Less than 15 mins
Frig parts had been scavenged in an apartment complex. Restoring socket was only a matter of plugging in two spade contacts and clipping in socket.
Was this helpful?
Thank you for voting!
door shelf retainer broke off
0 of 1 people
found this instruction helpful.
-
Sheryl from Wyoming, MI
- Really Easy
- Less than 15 mins
First, I removed the broken end cap from refrigerator door. Then I snapped the new end cap into place. Repair took less than 5 minutes and required NO TOOLS! Easy!! Got my part in one day, Thanks.
Was this helpful?
Thank you for voting!
The retainer latch broke
0 of 1 people
found this instruction helpful.
-
Gary from Clayton, NY
- Really Easy
- Less than 15 mins
Removed the shelf retainer and snapped the new one in. and reinstalled the shelf on the door.
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
This was a very simple problem!
What really impressed me was that I ordered the part from you before noon on one day and received it by 11 AM the next day!!!
Was this helpful?
Thank you for voting!
Broken shelf support on the refrigator door
0 of 2 people
found this instruction helpful.
-
Matthew from Philaelphia, PA
- Really Easy
- Less than 15 mins
I matched the part I needed throught your web site. Then I called and spoke to a customer support person, and gave my personal information to her. I do not like giving my credit card numbers over the internet. Your site allows me to do that.
Was this helpful?
Thank you for voting!
Light burnt out.
2 of 8 people
found this instruction helpful.
-
Roscoe G from ROCHESTER, NY
- Very Easy
- Less than 15 mins
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this helpful?
Thank you for voting!
WATER WAS NOT SHUTTING OFF
3 of 17 people
found this instruction helpful.
-
cathy. from etna, OH
- Really Easy
- 15 - 30 mins
-
Screw drivers
I HAD A CHAT WITH LG EXPLAINED THE PROBLEM . SAID IT WAS THE WATER SHUT OFF VALUE. V EVEN SENT THE PAGE WITH PART# TO ORDER ONLINE.
LOVE LG CHAT!!!
LOVE LG CHAT!!!
Was this helpful?
Thank you for voting!
Frezzer would freeze up, refrigerator stayed cold, solved the problem. Now the refrigerator seems to be running more than usual.
-
Henry from West Seneca, NY
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set
Checked the defroster coil which is located behind the rear panel in the freezer compartment, it was still working. Followed the schematics down to the defrost timer, which is located in the lower front of the refrigerator and tried that. Plugged in the new part and the problem is solved.
Was this helpful?
Thank you for voting!
Refrigerator and freezer drawer would not maintain set temperature
-
James from Bel Air, MD
- A Bit Difficult
- 30 - 60 mins
-
Socket set
Condenser fan motor was running slow. This was not a problem included in your list of possible problems. I thought that maybe the capacitor was bad but have no way to check it. So I ordered one. when I received it, I installed it. That was not the problem. So I ordered a fan motor and installed it. That was not the problem. So finally I o
... Read more
rdered a control board and installed it. That solved the problem. So maybe you should put "cond.fan motor runs slow" in your list of possible faults and what causes that problem. Capacitor was easy to install, simply remove the cover plate, flip off retaining wire, unplug the capacitor and replace. Fan motor was a bit more difficult. It must be removed from mount after fan scroll is removed. Remove one screw that holds scroll, bend the top down and remove. Then pull hard on fan blade to remove it. It must be installed on new motor. Two screws in frame mount can be removed with some effort if you have a 1/4" drive ratchet with a Phillips screwdriver bit. Then pull frame open and install new motor. Push fan blade on new motor shaft hard. Replacing control board was easy. I used a pair of long nose pliers with 90 degree bend to get mounting pins closed to pull board off.
Read less
Was this helpful?
Thank you for voting!
Freezer And Frig Both Warm And Compressor Would Not Run
-
joe from decatur, GA
- Easy
- 15 - 30 mins
-
Screw drivers, Wrench (Adjustable)
I replaced the thermostat, temperature sensor, and the run capacitor. . . Refrigerator still not cooling. I checked the start relay and measured the input terminals on the compressor for the correct resistance. . . Everything measured correctly. In a last ditch effort before calling for service, I pulled the main board, inspected it and
... Read more
saw the problem right away. One leg on the compression capacitor had desoldered itself. Got out my soldering iron and applied a good amount of solder to that point. Put everything back together and turn it on. . . Problem fixed. The compressor kicked on right away and started cooling the refrigerator.
Read less
Was this helpful?
Thank you for voting!
defrost timer was bad
-
Reese from Coconut Creek, FL
- Easy
- 15 - 30 mins
-
Nutdriver, Screw drivers
repalaced the old one with the new one. easy
Was this helpful?
Thank you for voting!
Starter/overload assembly and run capacitor were bad
-
Colby from Blanding, UT
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed rer cover, unplugged starter assembly from side of compressor and replaced unit with a new one. Plugged fridge in and it works good.
Was this helpful?
Thank you for voting!
fan and compressor wont start
-
JOSE from NEW YORK, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
Googled the model number of refrigerator with symptoms of "refrigerator wont run". Parts select web site appeared on my screen, opened Parts Select website, Partselect said probable cause of my frige symptom was that the run capacitor usually burns out 51% of the time. They were correct with the diagnosis 100%. I ordered the run capacito
... Read more
r for $23.00, installed it in 10 minutes, refrigerator runs good as new. Thank you for saving me cost of service call. I probably saved $200 or more. I will use Partselect again with my next problem. THANK YOU,
Read less
Was this helpful?
Thank you for voting!
Reistall shelf
-
Oleg from Lees Summit, MO
- Really Easy
- Less than 15 mins
Replaced cap and reinstalled. But I used iron nail inside cover to hold right side because crack was at right hole and right part would not help.
Was this helpful?
Thank you for voting!
needed new light socket
-
Charles from Williamsburg, VA
- Really Easy
- Less than 15 mins
Pulled out old socket.pushed in new one.
Was this helpful?
Thank you for voting!
compressor running and hot, refer and fridge room temp.
-
Charles from Durham, CA
- Really Easy
- Less than 15 mins
Watched a youtube on capacitors- though on a motor with a pulley, the symptoms were the same, motor running and pulley not turning-bad capacitor. Took a chance for a 17+ dollar part vs a new compressor. It worked.
Was this helpful?
Thank you for voting!