Microwave Hardware

Shop By Brand

Popular Microwave Hardware

Your Price
$8.12
  In Stock
Top Mounting Screw
★★★★★
★★★★★
(2)
PartSelect Number PS11744892
Manufacturer Part Number WP8169704
This screw is sold individually.
Installation Instructions
Michelle from Gilbert, AZ
Bought Used needed Top Mount Screws and Filters
Awesome! Everything fit and worked! Thanks! Read more...
Your Price
$7.76
  In Stock
Screw
PartSelect Number PS11743743
Manufacturer Part Number WP681249
Sold individually.
Your Price
$7.79
  In Stock
Flat Cab Mounting Bolt
★★★★★
★★★★★
(2)
PartSelect Number PS651196
Manufacturer Part Number WB01X10180
This part is the replacement flat cab mounting bolt for your microwave. The bolt is approximately 4 inches long. It is designed to hold the microwave in place in your cabinet. The main reason to replace this bolt, would be if the old bolt is stripped or missing, and the microwave will not stay secure in the cabinet. This is an OEM part sourced directly from the manufacturer, and it is sold individually.
Your Price
$7.76
  In Stock
Cover Screw
PartSelect Number PS11740701
Manufacturer Part Number WP308685
Sold individually.
Installation Instructions
Curtis from PALM BAY, FL
Relocating dishwasher into the new kitchen layout
In this case the dishwasher had already been installed for a few years. After removing it, we inspected it and saw it needed a bit of TLC. The transport wheels on the back were missing, making it harder to move around without scratching the tile and some of the original hardware was rusted or broken off. I looked up the parts easily here on PartsSelect using their parts breakdown diagrams and was glad to see what I needed was still available. We had a licensed plumber relocate the hot water line and drain for us to make things a bit easier.
A licensed electrician had also moved the power line over to the new location and left a wire sticking out of the bottom of the wall to hardwire the dishwasher in again. We decided to convert the dishwasher to be able to be plugged into a standard 20amp wall outlet instead. We had already purchased a kit with a nice long cord and strain-relief snap on plastic fitting that snapped onto the metal incoming power box on the bottom front of the dishwasher. Using the supplied wire nuts, etc., we connected the wires and ground wire to the proper wires from the dishwasher and ground lug. We put the dishwasher aside and then went to work on converting the power wire coming out of the bottom of the wall, to a conventional outlet. I am mentioning all this because in our first attempt we unfortunately put the receptacle a bit high off the floor and the new power cord plug end, stuck out and hit the back of the dishwasher so it would not go all the way in and was sticking out from under the counter top. I tried using one of those flat adapter cables, but even that still stuck out to far. So we ended up relocating the outlet box as low as we could on the wall and this allowed the plug to stick out into the opening area at the bottom rear area of the dishwasher so it could now be slid all the way in under the kitchen counter properly. I hope that bit of trial and error will save you some time if you ever decide to go the pluggable route too.
The new installation required the use of the dishwasher side mount brackets, so we had to purchase a replacement set of those, complete with the hardware to screw them down.

This project took a bit longer than planned due to the power plug problem, one which we will remember for any other similar appliance relocation projects, as well as the time to get our new parts in that we had to order, but other than that the rest went smoothly and the dishwasher was relocated successfully.
Read more...
Your Price
$17.86
  In Stock
SUPPORT
★★★★★
★★★★★
(4)
PartSelect Number PS8728127
Manufacturer Part Number 00617262
Your Price
$8.17
  In Stock
Screw
★★★★★
★★★★★
(1)
PartSelect Number PS11742758
Manufacturer Part Number WP489497
Sold individually.
Your Price
$10.84
  In Stock
Door Handle Screw
★★★★★
★★★★★
(1)
PartSelect Number PS1151777
Manufacturer Part Number 5304453223
10-14 x 1.82. Sold individually.
Your Price
$7.76
  In Stock
Screw
★★★★★
★★★★★
(5)
PartSelect Number PS11753384
Manufacturer Part Number WPW10348409
Sold individually.
Installation Instructions
REBECCA from GREENFIELD TWP., PA
My son broke the door handle off the Refrigerator
I removed two screws that were holding on broken handle. I put new handle in place and attached it with new screws. Ordering parts on line and receving them in mail a few days later was awsome. I did not need my husbands help at all . Read more...
Your Price
$8.36
  In Stock
Steel Washer
PartSelect Number PS436497
Manufacturer Part Number 316008401
This steel washer is also known as the range washer and is used on your oven door. The measurements for the steel washer are a three quarter inch outer diameter, and a one quarter inch inner diameter. This washer is an OEM part, made of steel, which is sourced directly from the manufacturer. This specific steel washer is used with your range, to secure the inner and outer door together and to secure the oven door handle back in place. Users have ranked this repair as a simple installation that should take you less than fifteen minutes to complete.
Installation Instructions
KELLY from LAKELAND, FL
Handle on oven door broke
called around and way to much money for repair man as well as parts from local appliance repair store. They wanted 10.00 for a screw that we got from you for $3.00 same as all the other parts saved over 70.00 dollars.

quick delivery and easy repair ... like new again .

would use you again
Read more...
Your Price
$6.24
  In Stock
Plastic Rivet
★★★★★
★★★★★
(1)
PartSelect Number PS222397
Manufacturer Part Number WB01X10055
This part is the replacement plastic rivet, or stirrer fan cover clip for your microwave. It is made of white plastic and is approximately ¼ inch in diameter, and ½ inch long. The plastic rivet holds the fan cover to the inside of the microwave. The main reason to replace the rivet, is if your current rivet is broken or missing, and the fan cover will not stay in place. This is an OEM part sourced directly from the manufacturer.
Installation Instructions
Steven from UTICA, NY
cover stirrer fan was burned and sparking in three part even the plastic rivet
just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : ) Read more...

Brands