Maytag Microwave Hardware

Maytag Appliance Parts
Shop By Part Type

Popular Maytag Microwave Hardware

Your Price
$6.44
  In Stock
Top Mounting Screw
★★★★★
★★★★★
(2)
PartSelect Number PS11744892
Manufacturer Part Number WP8169704
This screw is sold individually.
Installation Instructions
Michelle from Gilbert, AZ
Bought Used needed Top Mount Screws and Filters
Awesome! Everything fit and worked! Thanks! Read more...
Your Price
$6.61
  In Stock
Screw, 8/18 x 3/8
★★★★★
★★★★★
(2)
PartSelect Number PS11746840
Manufacturer Part Number WP90767
This screw is sold individually.
Installation Instructions
Alexander from Lakeland, FL
Broken Dryer Knob
First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!! Read more...
Your Price
$5.67
  In Stock
Screw
★★★★★
★★★★★
(1)
PartSelect Number PS11741601
Manufacturer Part Number WP3400805
Sold individually.
Installation Instructions
joan from arlington heights, IL
Door handle broken
Couldn't have been easier. Unscrewed old handle and screwed in the new. I ordered new screws but didn't need them, just used the old ones. Read more...
Your Price
$5.67
  On Order
Screw
PartSelect Number PS11741605
Manufacturer Part Number WP3400832
This screw is sold individually.
Installation Instructions
Alan from PEARISBURG, VA
Broken front glass
Very easy. Take the two top screws out and the two bottom holders off. The bottom holders hold the glass up in place. Grab the handle and pull glass out. To install put handles screws back on the glass and slide in place. Once in place install the bottom holders pieces back on. *** I would buy screws because after years of use the head rust out and sometimes they are hard to get off... all in all very easy to install Read more...
Your Price
$5.67
  In Stock
Screw
PartSelect Number PS11742539
Manufacturer Part Number WP4449154
Sold individually.
Installation Instructions
Dan from Madison, MS
Bake Unit not heating properly
Turned the power to the oven off. Took two crews out. Disconnected the old unit, connected the new unit, put the two screws back in and tested the unit. Read more...
Your Price
$6.54
  In Stock
Nut
PartSelect Number PS8260221
Manufacturer Part Number W10596040
Your Price
$5.62
  In Stock
Screw
★★★★★
★★★★★
(2)
PartSelect Number PS11747542
Manufacturer Part Number WP98165
This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.
Installation Instructions
Lynn H from MILL CREEK, WA
Hinge pin for drawer lid broke
1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping them aligned as installed. The part on the back wall swings out so that the tab on the left end of the piece may be withdrawn from the securing slot (hole). The two parts should be carefully removed while keeping the two parts at a right angle the way they are installed. The reason for this caution follows. 4. On the back side of both parts are plastic pieces that, I believe, can be easily broken if you are not aware. The pieces are connected together at the right angle. They are the control arms for the temperature control -- on right side End Cap only -- the left side doesn't have them or the rear part on the back wall. 5. The pieces must be disconnected and removed. You must examine and ponder how they are held in place and hooked together in order to disconnect and remove them without damaging them. The same advice is applicable to reinstalling the pieces in the new part -- End Cap. 6. After reassembled and keeping the two parts at a right angle, insert the tab on the left end of the back wall part into the slot (hole) and swing the two parts back into position. 7. Replace the screws. 8. Done, reinstall the shelf, shelf support, and the drawers. NOTE: I ordered the two screws but they were not needed. Read more...
Your Price
$5.06
  In Stock
Screw
★★★★★
★★★★★
(1)
PartSelect Number PS11757587
Manufacturer Part Number WPY706189
Your Price
$5.67
  In Stock
SCREW
PartSelect Number PS389899
Manufacturer Part Number 8169479
Sold individually.
Installation Instructions
MILES from ALAMOGORDO, NM
Microwave Door Exterior panel was cracked and the handle was broken
I disassembled the door by removing three screws from the side opposite the hinges and pried (lifted) that edge up and rotated the panel away from the metal portion of the door towards the hinges. I assembled the new door panel by attaching the handle (2 screws). I attached the new door panel by starting at the hinge side of the door and working towards the opposite end of the door. The last little bit was tough to get it to snap over the metal sub-door. I reinstalled the 3 screws to snug, not tight because I did not want to crack the plastic. Read more...
Your Price
$19.26
  In Stock
Mounting Hardware
PartSelect Number PS989071
Manufacturer Part Number 8205948

Related Parts