EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Roper Microwave Hardware

Popular Roper Microwave Hardware

This screw is sold individually.
This screw is sold individually.
Installation Instructions
Michelle from Gilbert, AZ
Bought Used needed Top Mount Screws and Filters
Awesome! Everything fit and worked! Thanks!
$7.47
In Stock
Sold individually.
Sold individually.
Installation Instructions
MILES from ALAMOGORDO, NM
Microwave Door Exterior panel was cracked and the handle was broken
I disassembled the door by removing three screws from the side opposite the hinges and pried (lifted) that edge up and rotated the panel away from the metal portion of the door towards the hinges. I assembled the new door panel by attaching the handle (2 screws). I attached the new door panel by starting at the hinge side of the door and working towards the opposite end of the door. The last little bit was tough to get it to snap over the metal sub-door. I reinstalled the 3 screws to snug, not tight because I did not want to crack the plastic.
Sold Individually.
Sold Individually.
$18.22
In Stock
$9.62
Special Order
This rivet is used for the stirrer cover/wave guide. They are sold individually.
This rivet is used for the stirrer cover/wave guide. They are sold individually.
Installation Instructions
Jon from Shafter, CA
Spreader Cover Damaged in fire in oven
Cleaned area, installed new cover secured with plastic revit.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

$7.47
In Stock
Sold individually.
Sold individually.
Roper Microwave Screw
Part #WP4393834
$7.47
In Stock
Sold individually.
Sold individually.
Roper Microwave Zip Tie
Part #WPW10339879
$7.47
In Stock
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly together using a zip tie. It is a flexible, plastic strip that has serrated teeth and a locking mechanism. If the zip tie is damaged, it should be replaced. Freely moving wires may rub against surfaces, causing them to break over time. Zip ties are single-use and may not be reused after they are removed from a machine. To release the locking mechanism, you will need to insert a small flat tool into the head of the zip tie, between the tongue and the serration, and depress the bar. You can then pull the teeth out of the mechanism to loosen the cable tie. This part is produced by the original equipment manufacturer and is sold individually.
Roper Microwave Screw
Part #W11380570
   No Longer Available
Sold individually. For white and almond models.
Sold individually. For white and almond models.
Installation Instructions
MILES from ALAMOGORDO, NM
Microwave Door Exterior panel was cracked and the handle was broken
I disassembled the door by removing three screws from the side opposite the hinges and pried (lifted) that edge up and rotated the panel away from the metal portion of the door towards the hinges. I assembled the new door panel by attaching the handle (2 screws). I attached the new door panel by starting at the hinge side of the door and working towards the opposite end of the door. The last little bit was tough to get it to snap over the metal sub-door. I reinstalled the 3 screws to snug, not tight because I did not want to crack the plastic.
Sold individually.
Sold individually.
What this part fixes:
  • Door not closing properly
Installation Instructions
Charlene from San Jose, CA
replace cracked microwave handle
Don't order the two screws. They are common screws you probably have in your garage.

After unhinging the microwave door, be carefeul taking the door apart. Do it over a kitchen counter covered by a towel padding. It came apart suddenly and half of it fell on the floor, but didn't break.

More Roper Microwave Parts

People often need to fix these common parts