Roper Microwave Fuses

Your Price

$36.85

Roper Microwave R Ceramic Fuse 20 A

★★★★★

7 Reviews

PartSelect Number PS17629444

Manufacturer Part Number W11707984

If your microwave is not turning on it could be due to your fuse needing to be replaced. This part protects the microwave by shutting it off if there is an electrical surge. This fuse is just over an inch long, is metallic on both ends and ceramic in the middle. Before beginning this repair, unplug the appliance and wait a few minutes before starting. Remove the outer cabinet which is held in place with two screws. You will then locate the power cord which will lead you to the fuse holder. Determine if the fuse has blown. Using an ohmmeter, you should be able to figure out if it has blown. A proper reading is zero ohms, if it reads as anything else then your fuse has in fact blown. Simply snap the old fuse out of place and place the new one in.

Fixes these symptoms

No heat
Won’t turn on
See more...

Installation Instructions

Daniel from DECATUR, GA

Microwave wouldn't turn on and found breaker been tripped and then microwave wouldn't turn on at all.

Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done. Read more...

Your Price

$19.30

Roper Microwave Line Fuse

★★★★★

1 Review

PartSelect Number PS11745084

Manufacturer Part Number WP8183507

Fixes these symptoms

Won’t turn on
See more...

Installation Instructions

John from Palos Hills, IL

No Power to Microwave

After determined the problem on one of the websites...I received the part I needed... removed the control panel and installed the new main fuse In about 15 mins! Read more...