Amana Microwave Hardware

Your Price

$8.83

Amana Microwave Top Mounting Screw

★★★★★

2 Reviews

PartSelect Number PS11744892

Manufacturer Part Number WP8169704

This screw is sold individually.

Installation Instructions

Michelle from Gilbert, AZ

Bought Used needed Top Mount Screws and Filters

Awesome! Everything fit and worked! Thanks! Read more...

Your Price

$5.42

Amana Microwave Screw, 8/18 x 3/8

★★★★★

2 Reviews

PartSelect Number PS11746840

Manufacturer Part Number WP90767

This screw is sold individually.

Installation Instructions

Alexander from Lakeland, FL

Broken Dryer Knob

First let me just say that Partselect.com is now one my stored favorites in my web browser. I came home from a business trip and saw a pair of pliers on the dryer. I thought that was odd until my wife informed me that the knob on the dryer had broken. So she was using the pliers to select the cycle. Somehow she knew where the missing pointer was actually pointing. Since the dryer was over 5 years old I saw this as an opportunity to upgrade both appliances. Not with my frugal wife. A search of the Internet popped up partselect. I ordered Wednesday morning and the parts where on my doorstep late Thursday. Trust me I was very surprised. Everything worked perfectly. Two thumbs up!!! Read more...

Your Price

$13.38

Amana Microwave Screw

★★★★★

1 Review

PartSelect Number PS11742758

Manufacturer Part Number WP489497

Sold individually.

Installation Instructions

Sheryll Lawrence from BRONX, NY

Screws are a bit small and short for the job

Using a screwdriver Read more...

Your Price

$7.76

Amana Microwave Screw

★★★★★

5 Reviews

PartSelect Number PS11753384

Manufacturer Part Number WPW10348409

Sold individually.

Installation Instructions

REBECCA from GREENFIELD TWP., PA

My son broke the door handle off the Refrigerator

I removed two screws that were holding on broken handle. I put new handle in place and attached it with new screws. Ordering parts on line and receving them in mail a few days later was awsome. I did not need my husbands help at all . Read more...

Your Price

$8.04

Amana Microwave Screw

★★★★★

1 Review

PartSelect Number PS11757587

Manufacturer Part Number WPY706189

Your Price

$8.04

Amana Microwave Installation Screw

★★★★★

2 Reviews

PartSelect Number PS11741612

Manufacturer Part Number WP3400882

This screw is sold individually.

Your Price

$8.04

Amana Microwave Screw

PartSelect Number PS11742742

Manufacturer Part Number WP489349

This screw is sold individually.

Your Price

$7.76

Amana Microwave Screw

★★★★★

2 Reviews

PartSelect Number PS11747542

Manufacturer Part Number WP98165

This screw is a little under an inch long and is made of metal. It is used with a refrigerator's ice maker assembly. Sold individually.

Installation Instructions

Lynn H from MILL CREEK, WA

Hinge pin for drawer lid broke

1. Remove all drawers {3}, shelves {glass 1}, shelf support {1}. 2. Remove two {2} screws from End Cap. 3. Carefully remove End Cap and drawer temperature control part on the back wall keeping them aligned as installed. The part on the back wall swings out so that the tab on the left end of the piece may be withdrawn from the securing slot (hole). The two parts should be carefully removed while keeping the two parts at a right angle the way they are installed. The reason for this caution follows. 4. On the back side of both parts are plastic pieces that, I believe, can be easily broken if you are not aware. The pieces are connected together at the right angle. They are the control arms for the temperature control -- on right side End Cap only -- the left side doesn't have them or the rear part on the back wall. 5. The pieces must be disconnected and removed. You must examine and ponder how they are held in place and hooked together in order to disconnect and remove them without damaging them. The same advice is applicable to reinstalling the pieces in the new part -- End Cap. 6. After reassembled and keeping the two parts at a right angle, insert the tab on the left end of the back wall part into the slot (hole) and swing the two parts back into position. 7. Replace the screws. 8. Done, reinstall the shelf, shelf support, and the drawers. NOTE: I ordered the two screws but they were not needed. Read more...