Amana Microwave Latches

Amana Appliance Parts
Shop By Part Type

Popular Amana Microwave Latches

Your Price
$23.92
  In Stock
Top Interlock Support
★★★★★
★★★★★
(5)
PartSelect Number PS11745301
Manufacturer Part Number WP8206419
Fixes these symptoms
  • Door not closing properly
  • Won’t turn on
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$6.89
  In Stock
Interlock
★★★★★
★★★★★
(3)
PartSelect Number PS11749178
Manufacturer Part Number WPW10156813
Also known as a switch holder.
Fixes these symptoms
  • Door not closing properly
  • Won’t turn on
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$18.24
  In Stock
CAM-PLATE
PartSelect Number PS9491943
Manufacturer Part Number W10562613
Fixes these symptoms
  • Door not closing properly
  • Won’t turn on
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$4.42
  On Order
Locker
★★★★★
★★★★★
(4)
PartSelect Number PS3522838
Manufacturer Part Number 4026W2A019A
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with the door latch assembly. This locker is made of plastic and measures 7 inches long x 2 inches wide. If either of the hooks is broken or does not have any spring tension, you may need to replace the assembly.
Fixes these symptoms
Installation Instructions
Gregg J. from WEST CHESTER, PA
Door Latch spring keeper broke
Removed door from microwave and then popped the inside widow trim ring off. Removed 4 screws from the window bracket, replaced the latch with a new part and then assembled. Read more...
Your Price
$5.05
  In Stock
Lever
PartSelect Number PS3523009
Manufacturer Part Number 4510W3L003A
Fixes these symptoms
Your Price
$5.57
  In Stock
Door Latch
PartSelect Number PS11745097
Manufacturer Part Number WP8184263
Also known as a door hook.
Your Price
$31.45
  In Stock
HOLDER ASSEMBLY,LOCKER
★★★★★
★★★★★
(3)
PartSelect Number PS3557312
Manufacturer Part Number 3501W1A053A
Installation Instructions
James from DELTA, CO
Defective door interlock switches
Removed each switch (3) and checked them with multi-meter; got intermittent readings on two of the three. Also broke of a piece of the frame that holds the switches trying to remove them (old, exposed to heat and moisture over the years caused the plastic to become brittle and the wiring connectors were also hard to disconnect probably because of heat and moisture over the years).
Went to PartSelect web site and discovered the three switches and frame were bundled in to one part number, 43501A. So, I called and spoke with a very knowledgeable technician and she explained why plus helped me order the part over the phone. When I received the part, the switches were already mounted in the frame and the frame was modified compared to the OEM frame. As I began to remove the old frame, I discovered why the new frame was modified. It was as if PartSelect had done many of these door interlock repairs and they knew exactly where and how to modify the frame and communicated this with the manufacturer, because the new frame installation was very easy, there was nothing hard about installing the new frame with the switches already in place. I then reconnected the wiring to the switches and tested the microwave and it works fine now, Problem solved, Thanks PartSelect.com
Read more...
Your Price
$4.42
  In Stock
Locker
PartSelect Number PS3522837
Manufacturer Part Number 4026W2A016A
Your Price
$30.15
  In Stock
Latch Board
PartSelect Number PS11745109
Manufacturer Part Number WP8185271
Your Price
$4.42
  On Order
Locker
★★★★★
★★★★★
(1)
PartSelect Number PS3522835
Manufacturer Part Number 4026W2A014A

Related Parts