Amana Microwave Switches

Amana Appliance Parts
Shop By Part Type

Popular Amana Microwave Switches

Your Price
$5.36
  In Stock
Door Switch - 3 Terminal
★★★★★
★★★★★
(21)
PartSelect Number PS10057151
Manufacturer Part Number W10727360
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heating properly or if it runs for a few seconds but turns off.
Fixes these symptoms
  • Doesn’t shut off
  • Door not closing properly
  • No heat
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$34.59
  In Stock
Microwave Door Interlock Switch
★★★★★
★★★★★
(10)
PartSelect Number PS2361111
Manufacturer Part Number W10269458
This door interlock switch is for microwaves. Door interlock switch prevents the microwave from starting when the door is open. Because the microwave shielding and interlock switches must be properly tested following the door interlock switch replacement, a service technician should install this part.
Fixes these symptoms
  • Doesn’t shut off
  • Door not closing properly
  • Won’t turn on
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$8.24
  In Stock
Micro Switch
★★★★★
★★★★★
(23)
PartSelect Number PS3522738
Manufacturer Part Number 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximately 1 1/2 inches long, and has 2 metal prongs called terminals that extend from its body. If your microwave will not turn or heat properly, there could be an issue with the door switch. You can check the switch for continuity using a multi-meter. With the actuator button depressed, you should see continuity between these terminals. If there is no continuity the switch will need to be replaced. NOTE: Before you begin this repair, first make sure your microwave is unplugged, and that your capacitor is discharged. A capacitor stores large amounts of electricity even when your microwave is unplugged.
Fixes these symptoms
  • Doesn’t shut off
  • No heat
  • Tray won’t turn
  • See more...
Installation Instructions
Joshua from WHITE LAKE, MI
Microwave would not rotate or heat up food.
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included) Read more...
Your Price
$34.59
  In Stock
Door Switch
★★★★★
★★★★★
(4)
PartSelect Number PS2361113
Manufacturer Part Number W10269460
Fixes these symptoms
  • Door not closing properly
  • Won’t turn on
  • See more...
Installation Instructions
Mark from HOMER GLEN, IL
Door switch inconsistent operation for Open/Close sensing.
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time. Read more...
Your Price
$39.65
  In Stock
Door Switch - 250V
★★★★★
★★★★★
(2)
PartSelect Number PS2338920
Manufacturer Part Number W10211972
This door switch (Primary and Secondary) keeps the microwave from running when the door is open. NOTE: Two switches required. Sold individually.
Fixes these symptoms
Installation Instructions
E G from SILVERDALE, WA
The display kept asking me to close the door, even though the door was closed. The interior light stayed on.
I used a Google search to show how to access the area behind the front panel. There was a folded paper copy with a schematic and wiring diagram in that space.Then I used a multi-meter to determine which of the THREE micro-switches was causing the problem. I called your help line and ordered a replacement switch. The switch was delayed in transit so your agent credited me with the cost of shipping.

When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.

All seems to be working well now.

Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age?
Read more...
Your Price
$66.15
  In Stock
Door Interlock Switch Kit
★★★★★
★★★★★
(3)
PartSelect Number PS373050
Manufacturer Part Number 4392027
This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15 Amp, 125/250 Volt switches with 3/16 inch terminals. Be sure to disconnect power to microwave before replacing part. Use extreme caution when replacing microwave parts, as high-voltage capacitors can retain an electrical charge when unplugged. NOTE: This kit includes 2 single pole, double throw (SPDT) micro switches. As per the manufacture for the secondary interlock switch order part # 56001100.
Fixes these symptoms
  • Doesn’t shut off
  • No heat
  • Won’t turn on
  • See more...
Installation Instructions
Robert from Bainbridge Island, WA
Microwave worked intermittently depending on how door was closed
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to figure out that there is a plastic rod that inserts through the hole in the switch body. Once i figured this out went like a breeze. Lower horizontal switch was the bad one, but since the kit came with two switches i went ahead and replaced the upper horizontal one as well. IT appears that the horizontal switches are probably more likely to fail than the vertical switch based on the position of the switch and force angles. Works great now! Read more...
Your Price
$20.81
  In Stock
Holder Assembly,Locker
★★★★★
★★★★★
(7)
PartSelect Number PS3519053
Manufacturer Part Number 3501W1A019D
Fixes these symptoms
Installation Instructions
James from VIRGINIA BCH, VA
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive. Read more...
Your Price
$33.86
  In Stock
Door Switch
★★★★★
★★★★★
(2)
PartSelect Number PS2338922
Manufacturer Part Number W10211974
This part keeps the microwave from running when the door is open.
Fixes these symptoms
Your Price
$61.05
  In Stock
Exhaust Switch - Black
★★★★★
★★★★★
(2)
PartSelect Number PS11740768
Manufacturer Part Number WP3147265
Fixes these symptoms
Installation Instructions
Al from Abbeville, AL
The switch on the exhaust fan for the grill part of the stove went bad. I found the part on your site easily , ordered it and got it within 4 days.
I simply looked at the new switch , to see how it fastened in the stove. It had plastic clips that were easily depressed to allow the swithch to be removed. I removed it , (after turning the circuit breaker off to the stove) removed the three wires , and replace them on the new switch and simply pushed it in the space. It snapped in place , and the job was done . Works great! Read more...
Your Price
$15.03
  In Stock
SWITCH
PartSelect Number PS11769934
Manufacturer Part Number W10915404

Related Parts