Electrolux Washer Pumps

Videos!

Your Price

$165.56

Electrolux Washer Drain Pump - 120V 60 Hz.

★★★★★

23 Reviews

PartSelect Number PS7783938

Manufacturer Part Number 137221600

This is a 120 volt, 60 hertz drain pump that is manufactured to remove water from the tub of your washer once your clothes are washed. This part is the pump and motor assembly, which includes a red flapper to prevent drain backflow. You will need to remove the front panel of your washer to access the drain pump. The tools you will need for the repair are a Phillips screw driver, a putty knife, a pair of slip joint pliers, and a 5/16 nut driver. Be sure to disconnect the water supply from your washer before doing the repair. The metal edges on the appliance are sharp, so use work gloves to safely complete the repair.

Fixes these symptoms

Leaking
Not draining
Will not drain
See more...

Installation Instructions

kenneth from willard, OH

would't spin all water out or rinse out clothes

uplugged washer took front off washer 2 screws pryed up top pump was mounted with 2 screws and 2 wires took off found change in pump and the fins to pump worn off ordered part off line the wait for part was longer than the amount of time to fix problem and cost of part saved me about $25-35 if I was to buy local worth wait save money and fix problem washes like new spins and drains all water from tub. Read more...

Your Price

$188.21

Electrolux Washer Drain Pump - 120V 60Hz

★★★★★

1 Review

PartSelect Number PS2378516

Manufacturer Part Number 137240800

Fixes these symptoms

Will not drain
See more...

Your Price

$15.58

Electrolux Washer FILTER

PartSelect Number PS2345089

Manufacturer Part Number 134640200

Installation Instructions

Michael from MOSES LAKE, WA

Washing machine was leaking from the bottom, immediately after starting

After removing the front and door (easy after watching video) the problem was obvious. The old Tub to Pump Hose had come disconnected. The hose clamps came off easily and the replacement was straightforward. A bit of fussing to get the clamps to slide into the right position, but easily accomplished after some persistence. Definitely glad I did not call a repair guy for this. Read more...