Electrolux Washer Knobs

Videos!

Your Price

$55.29

Electrolux Washer Selector Knob

★★★★★

46 Reviews

PartSelect Number PS2330885

Manufacturer Part Number 134844410

This selector knob, also be known as the laundry appliance control knob, is meant for your washer or dryer. This model is sold individually and takes a D-shaped shaft. The purpose of this part is to attach to the shaft of a rotary or starter switch, which is located on the control panel. To install this part, remove your old selector by grabbing it with a firm grip and pulling it straight off. If the metal insert came off with the old part, pull it off as well, making sure the new knob will have enough room to snap in its place. No tools are required to make this repair.

Fixes these symptoms

Touchpad does not respond
Will Not Start
See more...

Installation Instructions

charles from new holland, OH

Dryer squealed like a pig and at times the drum stopped rotating

First thought the problem was a stretched drum belt or bad idler pulley. Ordered a new belt and idler assy plus spring. Replaced those items with relative ease following suggestions obtained at this site.However, problem persisted and I now suspected a bad drum bearing. Odered the bearing kit and replaced same using the following procedure.
1. Removed the cover from the back of the dryer (held in place via two phillip head screws)
2. Pushed down on the idler assy and removed the idler spring to release the drum belt.
3. Inserted flat tip screwdriver between the top panel and the dryer main body in the front of the dryer to pry the top loose from the two retaining clips.
4. used phillips screwdriver to remove the two retaining screws (one left, one right) that hold the front panel to the main body of the dryer. (about a foot down from the top of the dryer).
5. disconnected the wiring plug on the top right hand side at the top of the dryer.
6. lifted the front panel slightly removing it from the main body and placed it to the side.
7. lifted the rear of the drum to release it from the bearing bracket and removed the drum belt.
8. Pulled the drum through the front of the dryer body and moved it to an open work area.
9. Reached into the Dryer and loosened the two
bearing bracket screws with a nut driver. Here's where another pair of hands would have come in handy. Holding the ground bar on the back of the drum with on hand, reached into the dryer and finished removing the bracket screws somehow managing not to drop the tiny grounding ball (size of a BB) Removed the badly damaged plastic bracket, grounding bar, and grounding ball and set
them aside to be discarded later.
10. Used impact driver with phillips attachment to remove two of the three screws that hold the bearing to the back of the drum (these are on the inside) The third screw's head stripped out and I had a very difficult time removing it. Had it not been for that, the job would have taken less than an hour.
11. I had my wife hold the bearing in place while I started the three retaining screws.
12. My wife also got behing the dryer and held the grounding bar in place while I installed the new bearing bracket . (this kept me from loosing the grounding ball)
I just reversed the rest of the procedures to install the drum belt, drum, front panel, etc.
The dryer works like new now, doesn't squeal.
Also replaced the on/off switch knob (just pulled the old one from the stem and slid the new one on. Read more...

Your Price

$168.29

Electrolux Washer Knob Assembly

PartSelect Number PS11766018

Manufacturer Part Number 5304505019

Enhance your appliance with this genuine OEM Knob Assembly from Frigidaire. Ideal for select models of Frigidaire, Electrolux, White Westinghouse, and Tappan, this assembly offers the best fit and function. It's integral to processing your chosen cycle settings and reliably houses the display for your washer. It's worth noting, parts may appear identical, yet small variations in shape and size can occur, so make sure this assembly fits your specific model. As a safety precaution, unplug your washer before replacing this part, and don't forget to protect your hands with work gloves. The Knob Assembly is your key to an efficient, streamlined washing process.